Misty 1001482 User Manual
SAFETY DATA SHEET
A00124 MST HVY DTY GLASS CLNR 20net19
Version 1.1
Revision Date 02/17/2015
Print Date 06/01/2015
Material name
:
A00124 MST HVY DTY GLASS CLNR 20net19
Material number
:
000000000001001482
Company
:
Zep Inc.
Address
:
1310 Seaboard Industrial Blvd., NW
Atlanta, GA 30318
Telephone
:
404-352-1680
Emergency telephone numbers
For SDS Information
:
Compliance Services 1-877-428-9937
For a Medical Emergency
:
877-541-2016 Toll Free - All Calls Recorded
For a Transportation
Emergency
:
CHEMTREC: 800-424-9300 - All Calls Recorded.
In the District of Columbia 202-483-7616
Appearance
Aerosol containing a liquefied gas
Colour
white
Odour
characteristic
Gases under pressure
:
Liquefied gas
Hazard pictograms
:
Signal word
:
Warning
Hazard statements
:
H280 Contains gas under pressure; may explode if heated.
Precautionary statements
:
Storage:
P410 + P403 Protect from sunlight. Store in a well-ventilated
place.
IARC
No component of this product present at levels greater than or
equal to 0.1% is identified as probable, possible or confirmed
human carcinogen by IARC.
SECTION 1. PRODUCT AND COMPANY IDENTIFICATION
Manufacturer or supplier's details
SECTION 2. HAZARDS IDENTIFICATION
Emergency Overview
GHS Classification
GHS Label element
Potential Health Effects
Carcinogenicity:
1 / 9
SAFETY DATA SHEET
A00124 MST HVY DTY GLASS CLNR 20net19
Version 1.1
Revision Date 02/17/2015
Print Date 06/01/2015
ACGIH
Confirmed animal carcinogen with unknown relevance to
humans
ethanol
64-17-5
OSHA
No component of this product present at levels greater than or
equal to 0.1% is identified as a carcinogen or potential
carcinogen by OSHA.
NTP
No component of this product present at levels greater than or
equal to 0.1% is identified as a known or anticipated carcinogen
by NTP.
Substance / Mixture
:
Mixture
Chemical Name
CAS-No.
Concentration [%]
butane
106-97-8
>= 1 - < 5
1-propoxypropan-2-ol
1569-01-3
>= 1 - < 5
ethanol
64-17-5
>= 1 - < 5
General advice
:
Do not leave the victim unattended.
If inhaled
:
If unconscious place in recovery position and seek medical
advice.
If symptoms persist, call a physician.
In case of skin contact
:
If skin irritation persists, call a physician.
Wash off immediately with plenty of water for at least 15
minutes.
If on clothes, remove clothes.
In case of eye contact
:
Remove contact lenses.
Flush eyes with water at least 15 minutes. Get medical
attention if eye irritation develops or persists.
If swallowed
:
Keep respiratory tract clear.
DO NOT induce vomiting unless directed to do so by a
physician or poison control center.
Suitable extinguishing media
:
Dry chemical
Carbon dioxide (CO2)
Foam
Unsuitable extinguishing
media
:
High volume water jet
Hazardous combustion
products
:
Carbon dioxide (CO2)
Carbon monoxide
SECTION 3. COMPOSITION/INFORMATION ON INGREDIENTS
Hazardous components
SECTION 4. FIRST AID MEASURES
SECTION 5. FIREFIGHTING MEASURES
2 / 9
SAFETY DATA SHEET
A00124 MST HVY DTY GLASS CLNR 20net19
Version 1.1
Revision Date 02/17/2015
Print Date 06/01/2015
Smoke
Specific extinguishing
methods
:
Use extinguishing measures that are appropriate to local
circumstances and the surrounding environment.
Further information
:
Standard procedure for chemical fires.
Special protective equipment
for firefighters
:
Wear self-contained breathing apparatus for firefighting if
necessary.
Personal precautions,
protective equipment and
emergency procedures
:
Use personal protective equipment.
Ensure adequate ventilation.
Remove all sources of ignition.
Evacuate personnel to safe areas.
Beware of vapours accumulating to form explosive
concentrations. Vapours can accumulate in low areas.
Environmental precautions
:
Prevent further leakage or spillage if safe to do so.
Methods and materials for
containment and cleaning up
:
Sweep up or vacuum up spillage and collect in suitable
container for disposal.
Soak up with inert absorbent material (e.g. sand, silica gel,
acid binder, universal binder, sawdust).
Advice on safe handling
:
Avoid contact with skin and eyes.
For personal protection see section 8.
Smoking, eating and drinking should be prohibited in the
application area.
Dispose of rinse water in accordance with local and national
regulations.
Do not breathe vapours or spray mist.
Always replace cap after use.
Conditions for safe storage
:
BEWARE: Aerosol is pressurized. Keep away from direct sun
exposure and temperatures over 50 °C. Do not open by force
or throw into fire even after use. Do not spray on flames or
red-hot objects.
Observe label precautions.
Electrical installations / working materials must comply with
the technological safety standards.
Keep in a dry, cool and well-ventilated place.
Materials to avoid
:
Oxidizing agents
Components
CAS-No.
Value type
Control
Basis
SECTION 6. ACCIDENTAL RELEASE MEASURES
SECTION 7. HANDLING AND STORAGE
SECTION 8. EXPOSURE CONTROLS/PERSONAL PROTECTION
Components with workplace control parameters
3 / 9
Loading...