Page 1
Shade Width
Brackets
Hold
-
down
Handle
Larger Screws
Smaller Screws
18” to 37.9”
2 2 1 4 4
38” to 72”
3 2 2 6 4
Step
1 -
Install end caps, handle
and p
ositioning the shade
3) On the overhead surface ceiling.
Step
2 -
Installing the mounting brackets
Step
3 -
Fitting the cellular shade
into the
Cellular Shades:
Depth Mounting Considerations:
Inside Mounting: ¾” (0.75 inches) is the minimum depth required.
For a flush mount, the requirement is 2”.
Outside Mounting: A flat surface of 7/8” (.875 inches) is necessary.
CORDLESS CELLULAR SHADE INSTALLATION INSTRUCTIONS
Congratulations on purchasing the best in class cordless cellular shade on the market. You will be overjoyed with
this superior product in which quality was never compromised. Boasting measurable insulation, noise reduction,
energy efficiency, and child safety- you can take pride that your purchase will enhance the function and beauty of
your home.
Parts Included:
brackets
Slide the rear of the headrail onto the metal
tabs at the front of the bracket, and push up
to lock the headrail in place. Check carefully
to assure that each bracket is properly
secured.
Please allow 24 hours for your shade to drop
to its actual height when first installed due
to the nature of the fabric.
Bracket
(Optional)
(Bracket)
Install the end caps into the headrail and bottom rail.
Snap the handle at the center of the bottom rail.
Select the method of mounting your shade that best suits your
purpose:
1) Inside the window frame.
2) On the outside of frame
Bracket should be placed at the end of the width of the
shade’s headrail 4 inches from each end. If your shade is
supplied with the support brackets, position them evenly
between the end mounting brackets. Make sure the support
bracket is in line with the end mounting brackets.
(Hold-down
Bracket)
Loading...