NOTE:
Correct Direction
WARNING:
METAL BASE
MARBLE BASE
WASHER
SCREW(A)
STEEL PIPE
SCREW(B)
CONNECTOR
ALLEN WRENCH
SPRING WASHER
TUBE CAP
LED BULB
RING CAP
SOCKET
SHADE
(Pre-Installed)
SCREW(C)
ASSEMBLY INSTRUCTIONS
Before assembling your new lamp,please read the following precautions
and instructions thoroughly.
IMPORTANT SAFETY INSTRUCTIONS
This portable lamp has a polarized plug (one blade is wider than the
other) as a safety feature to reduce the risk of electric shock.This
plug will fit in a polarized outlet one way only.If the plug does not
fit fully in the outlet,reverse the plug.If it still does not fit,
contact a qualified electrician.Never use an extension cord unless
the plug can be fully inserted.Do not alter the plug.
The electrical wire is connected continuously through the poles.Do
not pull wires during unpacking,bad connections may result.
Place the lamp indoor dry area only.The lamp produces very high
temperature,always unplug electrical cord and allow sufficient time
for bulb to cool down before replacing bulb.
1.Carefully unpack all parts from the packaging and place them on a
ｃａｒｐｅｔ／flat/smooth surface.Be sure to remove all the packaging materials
from the lamp. *Do not plug into the electrical outlet when installing
or replacing bulb.（２ ｐｅｏｐｌｅ ｉｎｓｔａｌｌａｔｉｏｎ ｒｅｃｏｍｍｅｎｄｅｄ）
2.Ｕｎｓｃｒｅｗ ｔｈｅ ｐｒｅ－ｉｎｓｔａｌｌｅｄ Ｓｃｒｅｗ（Ａ）， Ｓｐｒｉｎｇ Ｗａｓｈｅｒ， ａｎｄ Ｗａｓｈｅｒ ｆｒｏｍ ｔｈｅ
Steel Pipe onto the Metal and Marble Base
ｂｏｔｔｏｍ ｏｆ ｔｈｅ ｐｉｐｅ． Screw
thｅ Screw(A) Spring Washer
with
3.Screw tightly
4.
Ｃｏｎｎｅｃｔ the Ｐｏｌｅ（Ａ） with Ｐｏｌｅ（Ｂ） and screw it ｔｉｇｈｔ ｗｉｔｈ screw(C) ｂｙ ｕｓｉｎｇ
ｔｈｅ ｐｒｏｖｉｄｅｄ Ｈｅｘ Ｗ
with the provided Allen Wrench.
ｒｅｎｃｈ．
5.Link up the Male and female Connector together.
6.Insert the 1 Arch Pipe into the Steel Pipe and Secure it with
the Screw B.
7.Ｕｎｓｃｒｅｗ ｔｈｅ ｐｒｅ－ｉｎｓｔａｌｌｅｄ Ｒｉｎｇ Ｃａｐ ｆｒｏｍ ｓｏｃｋｅｔ， ａｎｄ ｐlace the Shades onto
the tips of the Arch Pipe thr
8.Thread the Ring Caps ｂａｃｋ onto the Light Bulbs Sockets through
the Shades tightly.
9.Place the Light bulb onto the Light Bulb Socket
(LED Bulbs Included)
10.Insert the plug into the wall outlet,you are ready to use.
the
and the Washers.
oｕgh the Light Bulb Sockets.
Pole(B)
Pole (A)
For your long lasting uses,please use our approved LED Bulbs only. Lightbulb
item# A21-12TDM-E26-27-INT.
Other brand may not be compatible to our LED lamp, it may cause the dimmer
switch to burn out quickly,therefore void the manufacture warranty that comes
with this lamp.
Loading...