Page 1
ASSEMBLY INSTRUCTIONS
Page 2
BEFORE ASSEMB
LY
PART
LIST
HARDWARE LIST
Thank you for purchasing this quality product. This product has been designed for easy assembly and
constructed for durability. All parts were checked prior to packaging to insure quality. Prior to beginning
assembly, however, make sure all parts and hardware are included and free of obvious defect. If a part is missing
or defective, please contact the store where purchased.
IMPORTANT NOTE:
- Place all wooden parts on a clean and smooth surface such as a rug or carpet to avoid the parts from
being scratched.
- Remove all wrapping material, including staples & packing straps before you start to assemble.
- DO NOT tighten all screws and bolts until completely assembled.
- Keep all hardware parts out of reach of children.
When unpacking, please be careful not to discard any parts with the packaging. Before continuing,
please make sure you have the following parts:
NO Description Qty Sketch NO Description Qty Sketch
Bench top 1
A
B
Legs 4
When unpacking, please be careful not to discard any parts with the packaging. Before continuing,
please make sure you have all of the following hardware:
NO Description Qty Sketch NO Description Qty Sketch
1
Flat washer
(8x19mm)
8
3
Hexagon nut
(M8 x13mm)
8
Spring washer
2
(8x13mm)
8
4
Wrench
(M13)
1
Page 3
STEP 1
B4
Attach Legs (B) to the Top (A), by using Hexagon nuts (3), Washers (2) and (1).Tighten with the Wrench
(4).
B
B
B
A
1
2
3
Loading...