PIECE QUANTITY
A 1X
B 4X
H1 8X
H2 8X
H3 8X
H4 1X
Step 1 Step 2
CARE AND MAINTENANCE
Spot clean using a mild water-free solvent. Only a professional cleaner should
undertake a complete overall cleaning.
The use of steam or water-based cleaners may cause excessive shrinking or staining.
NOTICE
* Please make sure that you have all parts indicated before you begin assembly of
this item
* This item should be assembled on a soft surface to prevent scratching the finish
during assembly
* This item may require periodic tightening
WASHER
Part List and Hardware List
PREPARATION
Product Dimensions : 47.0"W x 23.5" D x 29.4" H
DESCRIPTION
PICTURE
TABLE TOP
LEG
BOLT
SPRING WASHER
WRENCH
Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and
hardware contents list.
If any part is missing or damaged, do not attempt to assemble the product.
Estimated Assembly Time: 10 minutes.
The Hardware needed to connect the legs (B) to the Table Top
(A) are 8 Bolts (H1), Spring Washers (H2) and Washers (H3).
Use Wrench (H4) to attach (4) Leg (B) to Table Top (A)
with (8) Flat Washer (H3), Lock Washer (H2) and Bolt
(H1). Fully tighten both Bolts
H1 H2 H3
B
A
H3
H4
H1
H2
Loading...