Miss Solar MS-7505-S User Manual

SOLAR GROUND LIGHT

[e-mail]

made in China

User’s Manual

User’s Manual

Model no.: MS-7505-S

This solar light is one of high-tech and solar photoelectric product. It have excellence on environmental protection green,
safe, can broadly apply in public locations such as road, square, garden etc.

In the daytime, when sun irradiate on the surface of light, the solar cell of light will bring electric energy and charge for
storage component .In the evening, the light will work automatically and illuminate the lamp-house shining.

PRODUCT STRUCTURE DIAGRAM

The light is weather-proof andcontains the parts as shown in diagram a:

INSTALLATION METHOD (1) （FOR YOUR REFERENCE ONLY）

1. According to the size of mounting case, then punching on the assemble place in light. See Diagram(a)、Diagram(b)

2. Put the mounting case into the hole, and fill with proper amount of grout or glue , then install on the same level as ground
surface. See Diagram (a)、Diagram(b).

3. After the cement become dry, clean up cement that has filter into the mounting case, and then
put light into the mounting box, and fixup it by cover the stainless steel on the mounting box and
fasten it by stainless steel bolt,。Diagram(a)、Diagram(b)、Diagram(c), Light installation is finished.

Stainless steel top cover

Luminosity face

Solar cell

Electric down-lead

Bottom cover bolt

Light bottom cover

Mounting case

Ground aiguille

Accumulator

Circuit Board

Diagram a

Diagram a

Diagram a

Diagram b

Diagram b

Diagram b

Diagram c

LED

User’s Manual

User’s Manual

INSTALLATION METHOD (2) （FOR YOUR REFERENCE ONLY）

1. Dig a hole on ground and fill with proper amount of grout (Diagram 1)

2. Put the mounting case into the hole, and install on the same level as ground surface (Diagram 2)

3. After the cement become dry, clean up cement that has filter into the mounting case, and then put light into the mounting
box, and fixup it by cover the stainless steel on the mounting box and fasten it by stainless steel bolt

Diagram 1

Diagram 2

Diagram 3

Diagram 4

4. Light installation is finished (Diagram 4).