Miseno MNO281A User Manual
MNO281A
Single handle pre-rinse kitchen faucet
TOOLS YOU WILL NEED
Adjustable wrench
Phillips screwdriver
Silicone Sealant
Pipe tape
SAFETY TIPS
• Cover your drain to avoid losing parts.
• The fittings should be installed by a licensed
plumber in your State.
• When installing flexible hose, Please note there
should be no torsion or deformation; do not fold
into Shape V or L; do not use if there are any cracks
or deformation
Questions, problems, missing parts?
Before returning to your retailer, please contact Customer Service at 1-855-480-2915 or infoservice@miseno.com
BEFORE INSTALLATION:
If you contact Customer Service, you will need the Model#, Serial Number
and Date Code. Please locate the Product ID tag and Serial number tag.
Please record the serial number and date code here BEFORE YOU INSTALL:
Serial Number Date Code
Please attach your receipt for proof of purchase.
__________________ ____________
MNO281CP/SS
Model
FAUCET INSTALLATION PROCEDURE
To
avoid over tightening inlet port to spout shank, use a second wrench to prevent inlet port from turning while attaching water hose, as seen in diagram.
CAUTION
!
SHUT OFF MAIN WATER SUPPLIES BEFORE INSTALLATION
1. Shut off water supplies. Remove old faucet. Clean
sink surface in preparation for new faucet.
2. The cover plate (escutcheon) is optional. Please
determine whether you want to install it or not. Place
putty beneath the plastic gasket and install faucet
through center hole.
3. Unscrew screws on lock nut. Slide rubber washer and
metal washer onto shank. Secure shank with lock nut.
4. Tighten end of shank with wrench and slip coupling
nut onto inlet port.
Loading...