Miroir M220 User Manual

HD Pro Projector

Quick Start Guide

Your Miroir HD Pro Projector

B

C

A

USB-C Video

HDMI

USBAUDIO

D

E

F

G

I

B

USB-C Charge

H

J

L

K

Battery Indicator Lights - Lights flash in turn as the device

A

charges. The battery is fully charged when all the lights
illuminate and no longer flash.

Volume Controls - Increase/decrease the volume output of

B

the projector.

Mode Control - Press for auto focus and auto keystone

C

adjustments. Press and hold to turn ECO brightness
mode on or o.

Audio Out (3.5mm) - Optional) Connect an external

D

speaker or headphones.

USB-C Video Input - Connect the supplied USB-C video

E

cable to a device that supports USB-C video output.

HDMI Video Input - Connect an HDMI cable to a device

F

that supports HDMI video output.

USB Power Output - Connect a USB power cable to

G

provide power to a HDMI streaming stick or to charge a
smartphone battery. Cannot be used for video input.

USB-C Charge Input - Connect the supplied USB-C

H

charging cable and power adapter. Fully charge battery
before the first use (approx. 4-5 hours).

Auto Focus Sensor - IMPORTANT: Do not block sensor.

I

Keep sensor clean and free of debris.

J

Projection Lens

Reset Button - Press to reset projector.

K

Power Button - Press and hold for 3 seconds to power the

L

projector on or o. Briefly press to check battery life
on the projector. Battery life will be displayed by the
number of lit battery indicator lights.