Since norms, speci cations and designs are subject to occasional change, please ask for con rmation of the information given in this publication.
Mirion Technologies (MGPI) SA
Route d’Eyguières 
FR-13113 Lamanon 
France
T +33 (0) 4 90 59 59 59 
F +33 (0) 4 90 59 55 18
Mirion Technologies (MGPI) Inc
5000 Highlands Parkway 
Suite 150 
Smyrna, GA 30082 
USA 
T +1 770 432 2744 
F +1 770 432 9179
Mirion Technologies (MGPI H&B) GmbH
Landsberger Strasse 328a 
DE-80687 Munich 
Germany
T +49 (0) 89515 13-0 
F +49 (0) 89515 13 169 
Mirion Commercial (Beijing) Co., Ltd.
Shanghai Jiangchang Commercial Branch
Room 801, 78 Jiangchang SanLu 
Zhabei District, Shanghai 200436 
PR of China 
T +86 21 6180 6920 
F +86 21 6180 6924
SGLM 202K
Special Monitors
PHYSICAL CHARACTERISTICS
 ● Radiation detected: gamma
 ● Detector: 3”x2” NaI(TI) scintillator + PMT
 ● Energy range: 
○ 16
N window: 4.5 MeV to 7 MeV
 ○ Gamma window: 0.2 MeV to 2.2 MeV
 ● Measurement range:  
 ○ Leak rate: 1 to 5 000 l/h 
(6 to 31 700 GPD)
 ○ Gamma: 0.5 to 100 000 cps
 ● Spectrum analysis: 1024 channels
 ● Lead shield: 2 π / 5 cm (2 π / 2 in)
ENVIRONMENTAL CHARACTERISTICS
 ● Long term temperature: 
+10°C to +40°C (+50°F to +104°F)
 ● Periodic temperature:       
-5°C to +55°C (+23°F to +131°F)
 ● MTBF: > 20 000 hours
 ● TID: 100 Gy (10
+4
 rad)
 ● Protection index: IP65 and IK07
MECHANICAL CHARACTERISTICS
 ● Dimensions:  
 ○ Processing unit: 390 mm x 196 mm x 187 mm 
(15.3 in x 7.7 in x 7.3 in)
 ○ Detector: Ø 402 mm x 429 mm (Ø 15.8 in x 16.9 in)
 ● Weight: 
 ○ Processing unit: 8 kg (17.6 lb) 
 ○ Detector: 226 kg (498 lb)
 ● Color: gray RAL 7030 (decontaminable paint)
ELECTRICAL CHARACTERISTICS
 ● Power supply: 230 Vac – 50 Hz or 120 Vac – 60 Hz
 ● Data link outputs: 1 RS232 and 2 isolated RS485
 ● Alarm relays: 3 SPDT relays
 ● I/O: 2 isolated analog outputs and 1 isolated analog 
input (0/4-20 mA)
SIGNALING (Applicable to LPDU only)
 ● Alphanumeric display: measurement, status…
 ● Sound alarm: buzzer 90 dBA at 1 meter
 ● Visual alarm: 3 lights (red, yellow, green)
REFERENCE STANDARDS
 ● Seismic: IEEE344 and IEC60980
 ● EMC: 2006/95/CE, 2004/108/CE, EPRI 102323, MIL 
STD 461 E, IEC61000-6-2 and IEC61000-6-4
VERSIONS
 ● 230 Vac or 120 Vac
 ● LPDU or LPU
 ● With or without RS485 junction box
 ● Detector cable length: from 20 m (65.6 ft) 
to 100 m (328 ft)
 ● Junction box cable length: 2 m (6.56 ft), 5 m (16.4 ft) 
or 10 m (32.8 ft)
ACCESSORIES
 ● Calibration tools
 ● Software
 ● USB converters
 ● Seismic quali ed wall mounting bracket for LP(D)U
 ● Detection sub-assembly support
www.mirion.com
144430EN-F