Mirion Technologies RTM850 User Manual
RADOS OneStep™
Body Contamination Monitor
CheckPoint:Body™ family
RADOS OneStep™
Body Contamination Monitor
The RADOS OneStep™ body contamination monitor
checks the entire body for contamination in one easy
step as personnel leave the controlled area. It is usu-
ally used in nuclear plants, research reactors and in
waste management plants.
The system is based on an industrial personal com-
puter. Extremely robust, real time and multi-tasking
Unix-based operating system, designed for high-
est performance in process control with an intuitive
graphical user interface for ease of use.
FEATURES
• small dead zones due to large detector surfaces
• reduce the measurement time by 25 % to 30 % with
2
our unique P
• graphic display of measurement result and location of
contamination
• operating in cps, cpm, dpm, Bq, Bq/cm
• rugged stainless steel housing, easy to decontaminate
accelerator
2
, kBq/m2, nCi
health physics
A Mirion Technologies Division
Featuring:
Health Physics
Division
Overview of Features Comprehensive body coverage with beta detectors
• gas ow proportional detectors for beta contamination detection (alpha without discrimination)
• class leading homogeneity of detector response by minimized dead zones
• various choices in protective grids offer opportunity to optimize either for sensitivity or
for detector protection
Modern, PC supported measurement electronics
• real time, multitasking operating system QNX
• graphical user interface, calibration tool, various optional applications (P
detector test etc.)
• voice guidance in two dozen languages
• various interfaces (USB, LAN, CD)
Designed for performance in nuclear environments
• stainless steel housing, easily decontaminated, easy maintenance
Proven measurement concept
• automatic correction of background reduction
• automatic adjustment of measurement time
• display of measurement values (cps, dpm, cpm, Bq, nCi, Bq/cm
Large choice of options: doors, barriers, small item boxes, card readers, dosimetry reader interface etc.
RADOS OneStep™
Body Contamination Monitor
CheckPoint:Body™ family
2
accelerator,
2
, kBq/m2)
Customer Benefits Quick and easy operation with robust performance
• software on the basis of the real-time QNX operating system proven in many industrial applications
2
• optional P
accelerator reduces measurement time up to 30 %
Designed for low cost of operation and easy maintenance
• maintenance software tools common over the CheckPoint:Body™ family of monitors
• quick ushing system as standard allows restart of system after repair of punctured detectors
within minutes
Ability to network
• TCP/IP ability
• optional link up with CeMoSys™ server for centralised monitoring
References
The OneStep™ monitor of the CheckPoint:Body™ family is the ideal monitor to control the
exit points from controlled areas in nuclear facilities with:
• potential contamination
• high throughput requirements
www.mirion.com
7NUC_OneStep_Y015-086E_3_FL
Mirion Technologies (MGPI) Inc
5000 Highlands Parkway
Suite 150
Smyrna Georgia 30082
USA
T +1.770.432.2744
F +1.770.432.9179
Since norms, specications and designs are subject to occasional change, please ask for conrmation of the information given in this publication.
© Copyright 2008, All rights reserved. For trademark and registered trademark information. The copyright in this work is the exclusive property of
Mirion Technologies (RADOS) GmbH and is protected under the laws of Germany and other countries worldwide.
Mirion Technologies (MGPI) SA
Lieu-Dit Calès
Route d‘Eyguières
F-13113 Lamanon
France
T +33 (0) 4 90 59 59 59
F +33 (0) 4 90 59 55 18
Mirion Technologies
(RADOS) Oy
P.O. Box 506
FIN-20101 Turku
Finland
T +358 2 4684 600
F +358 2 4684 601
Mirion Technologies
(RADOS) GmbH
Ruhrstrasse 49
D-22761 Hamburg
Germany
T +49 40 85193 0
F +49 40 85193 256
Mirion Technologies Shanghai Branch
Room 801, 78 Jiangchang
San Lu, Zhabei District
Shanghai 200436
China
T +86 21 6180 6920
F +86 21 6180 6924
Loading...