Mirion Technologies M540 User Manual
FEATURES/BENEFITS
Coal Fired Utility Boilers•
Excellent image quality and depth of eld of the
superheater tubes in the upper boiler.
Ash Hopper•
Allows the ash system operator to effectively monitor
the behavior and trends of the build-up and the ow
within the ash hopper.
IST-QUADTEK M540 LYNX
High Temperature Black and White IR
Camera Series
The IST-Quadtek M540 series of near IR Black and
White High-Temperature Cameras is designed to give
you the exibility to customize electronics, lenses,
lters and other options to provide continuous
monitoring of your process. Able to penetrate
gaseous and ne particulate interferences, these
cameras give a considerably improved image of
furnace, boiler, ash hoppers, or other processes.
Straight, oblique, or right angle lens tube options
are available to offer more exibility in mounting the
camera.
Bubbling Fluidized Bed Boilers•
Unique OAL lens gives plan view of bed with simple
through-wall camera installation. Helps operator to
recognize build-up of cake in the sand bed
imaging systems
A Mirion Technologies Division
Featuring:
?F
+
+
+
+
40
+
200
120
160
80
0
+
IN THE UK
PSHIRE
38
203
577
'L' - ACCORDING
TO LENS TYPE
261
203
293
IST-MODEL No
STD
ERIAL No
SPECIFICATIONS AND PERFORMANCE
CAMERA
Power Requirements 85-265 VAC, 47-440 Hz
Camera Sensor
Sensor Resolution >500 lines
Video 1.0 V P-P, 75 ohm, CCTV signal
Control /AIR: Remote iris adjustment (with M721
1
/2” solid state image sensor
/VTE: EIA RS170 525 lines or
/VTC: CCIR 625 lines
Remote Auto Iris Controller)
LENS
Construction Air or water cooled 304 stainless steel outer
shroud. Sapphire window for maximum
environmental protection.
Lens Options /L: Straight view, /RAL: right angle with 90°
offset optics, /OAL: oblique angle with 45°
offset optics, /WCL: water cooled
Lengths STD /L30: L=704mm (27.7”) or
/OAL30: L=678mm (26.7”)
Other lenses available. Please contact your
sales representative.
Field of View Wide: 75°H x 56°V
Medium: 55°H x 42°V
Narrow: 35°H x 26°V
Diameter /L: 38mm (1.5”)
/RAL & /OAL: 51mm (2.0”)
/WCL: 57mm (2.25”)
Cooling Requrements Instrument quality air, 12-19 dm
SCFM) @ 34 - 103 kPa (5-15 psig required
for straight view lens (to ISO 8573-1, Class
1• 7• 2)
Environment 1621°C (2950°F) with proper cooling
Thermocouple /TJ: Type J thermocouple option
/TK: Type K thermocouple option
3
/sec (25-40
ENCLOSURE
Construction /CEI: Corrosion-resistant, insulated, air-
cooled, NEMA 4;
/CEW: Corrosion-resistant, water-cooled,
NEMA 4
3
Cooling Type /CCV: Vortex cooling 13 dm
/sec @ 690 kPa
(25 SCFM @ 100 PSI); Instrument quality air
required.
Ambient Environment Max. 60°C (140°F) with negligible radiant
heat load. Water cooled option available to
handle high radiant heat environment
MECHANICAL
Video Output Jack Female PL-259 “UHF” type
Power Input Jack Removable waterproof miniplug (JOY type
TP, female 3-conductor; mating power cord
provided)
1
Enclosure Cooling
Input
Lens Cooling Input
Weight 30 pounds (14kg) for air-cooled congura-
/4” brass quick-disconnect nipple; mating
coupler (Snaptite BVHC4-4F) provided
1
/2” brass quick-disconnect nipple; mating
coupler (Snaptite BVHC8-8F) provided
tion (lens and camera)
200 IST Center
Horseheads, NY 14845
USA
T +1.607.562.4300
+1.800.432.1478
F +1.607.562.4392
© Copyright 2009. All rights reserved for trademark and registered trademark
information.
Station Road
Alton, Hampshire
GU34 2PZ, UK
T 01420.541600
F 01420.541700
Kaiser-Konrad-Str 93a
D 53225 Bonn
Deutschland
T 0228.625088
F 0228.626300
Quadtek® is a registered trademark of Mirion Technologies Corporation.
The above specications may vary according to system conguration.
Mirion Technologies Incorporated reserves the right to amend or change the
information on this sheet without prior warning.
02/09
Loading...