Mirion Technologies M530 User Manual
FEATURES/BENEFITS
Rotary Kilns and Coolers•
Provide continuous product quality monitoring.
Observe ring formation, burner ame and product as
it moves down the kiln or cooler. See potential upsets
early.
Coal Fired Utility Boilers•
Monitor ame shape to adjust burners for maximum
combustion and minimum fuel usage.
IST-QUADTEK® M530 LYNX
High Temperature Color Camera Series
The IST-Quadtek M530 Series of Visible Light High-
Temperature Color Cameras is designed to give you
the exibility to customize electronics, lenses, lters
and other options to provide continuous monitoring of
your high-temperature internal processes. Straight,
oblique, or right angle lens tube options are available
that offer more exibility in mounting the camera. Add
an M721 remote auto iris to adjust the camera iris from
the comfort of the control room providing a clear picture
from start-up to full load.
Bark Fired Boiler•
Observe fuel distribution, bed and feeder monitoring,
combustion and ame characteristics.
Glass Melt Tanks•
View for ame impingement and monitor the crown for
dripping. Easily see batch load, ow pattern and any
un-melted surface material.
imaging systems
A Mirion Technologies Division
Featuring:
SPECIFICATIONS AND PERFORMANCE
CAMERA
Power Requirements 85-265 VAC, 47-440 Hz
Camera Detector
System Resolution
Video
1
/2” solid state color image sensor
>450 lines
1.0 V p-p, 75 ohm, CCTV signal /VTN: RS170NTSC or /VTP: CCIR-B-PAL video timing
Control
/AIN: Manual focus and iris adjustment on back
/AIR: Remote iris adjustment with M721 Remote
Auto Iris Controller
LENS
Construction
Lens Options
Lengths STD /L30: L=27.7” (704mm) or
Field of View Wide: 75°H x 56°V
Diameter /L: 38mm (1.5”)
Cooling Requrements Instrument quality air, 12-19 dm3/sec (25-40
Environment 1621°C (2950°F) with proper cooling
Thermocouple /TJ: Type J thermocouple option
Air or water cooled 304 stainless steel outer
shroud. Sapphire window for maximum environmental protection.
/L: Straight view, /RAL: right angle with 90°
offset optics, /OAL: oblique angle with 45° offset
optics, /WCL: water cooled
/OAL30: L=26.7” (678mm)
Other lenses available. Please contact your
sales representative.
Medium: 60°H x 45°V
Narrow: 35°H x 26°V
/RAL & /OAL: 51mm (2.0”)
/WCL: 57mm (2.25”)
SCFM) @ 5-15 psig (34-103 kPa) required for
straight view lens (to ISO 8573-1, Class 1•
7• 2)
/TK: Type K thermocouple option
ENCLOSURE
Construction /CEI: Corrosion-resistant, insulated, air-
cooled, NEMA 4;
/CEW: Corrosion-resistant, water-cooled,
NEMA 4
Cooling Type /CCP: Air purged with check valve,1 SCFM
@ 2 PSI (0.5 dm3/sec @ 14 kPa)
/CCV: Vortex cooling 13 dm3/sec @ 690 kPa
(25 SCFM @ 100 PSI); Instrument quality air
required.
Ambient Environment Max. 60°C (140°F) with negligible radiant
heat load. Water cooled option available to
handle high radiant heat environment
MECHANICAL
Video Output Jack Female PL-259 “UHF” type
Power Input Jack Removable waterproof miniplug (JOY type
TP, female 3-conductor; mating power cord
provided)
Enclosure Cooling
Input
Lens Cooling Input
Weight 14kg (30 pounds) for air-cooled
1
/4” brass quick-disconnect nipple; mating
coupler (Snaptite BVHC4-4F) provided
1
/2” brass quick-disconnect nipple; mating
coupler (Snaptite BVHC8-8F) provided
conguration (lens and camera)
315 Daniel Zenker Drive
200 IST Center
Horseheads, NY 14845
USA
T +1.607.562.4369
+1.800.432.1478
F +1.607.562.4392
Station Road
Alton, Hampshire
GU34 2PZ, UK
T 01420.541600
F 01420.541700
© Copyright 2009. All rights reserved for trademark and registered trademark
information.
Quadtek® is a registered trademark of Mirion Technologies Corporation.
The above specications may vary according to system conguration.
Mirion Technologies Incorporated reserves the right to amend or change the
information on this sheet without prior warning.
02/09
Kaiser-Konrad-Str 93a
D 53225 Bonn
Deutschland
T 0228.625088
F 0228.626300
Loading...