
FEATURES
A ve-micron lter removes solids and bulk liquids•
Second 0.01 micron lter removes remaining oil •
vapors and corrosive gases
Independent gauges and regulators monitor air ow •
for camera and lens
Bypass option for easy lter replacement•
Low maintenance and no tools required•
IST-QUADTEK M407 AIR FILTER
Two-Stage Air Filter
The IST-Quadtek video imaging systems owe much
of their long-life and reliability to the use of cooling
purge air which serves to cool and clean the camera
enclosure and lens. A constant supply of clean air is
essential for proper camera operation and protection.
The supply air used for this purpose is a potential
source of dirt, oil, water, and chemical contaminates
and requires ltering before use. The M407 Two-
Stage Air Filter provides clean air in industrial
environments. The M407 is used in applications
where there is a higher air contaminate content level,
and the maximum ow needed is 129 SCFM @ 100
psig.
imaging systems
A Mirion Technologies Division
Featuring:

SPECIFICATIONS AND PERFORMANCE
Maximum Operating Temperature
3/4”
BSP
1/2”
BSP
1/2”
BSP
Maximum System Air Flow (WET) 37 dm3 s
Maximum Inlet Pressure
Lens Cooling Pressure Regulation
Pressure Regulation Purge Camera Cooling
Vortex Camera Cooling
M407 Air Filter with Vortex Regulator
Maximum Dimensions (Bypass Version)
M407 Air Filter with Purge Air regulator
M407 Air Filter with Options
65°C (150°F)
-1
(78 scfm) @ 100 psig inlet.
246 psig (1700 kPa) (17 bar g)
0 to 58 psig (0 to 400 kPa) (0~4 bar g)
0 to 58 psig (0 to 400 kPa) (0~4 bar g)
0 to 160 psig (34 to 1104 kPa)
548mm H x 337 mm W x 168mm D (21.6” H x 13.3” W x 6.6” D)
700mm H x 369mm W x 168mm D (27.5” H x 14.5” W x 6.6” D)
GAS.00341 gauge (0~4 bar)
GAS.00344, includes:
Purge air regulator
Filter bypass with low pressure switch
Alarm contacts for electronic service indicator
M407 Air Filter with Vortex Regulator
M407 Air Filter with Options
GAS.00340 gauge (0~10 bar
GAS.00343 gauge (0~4 bar), includes:
Vortex Regulator
Filter bypass with low pressure switch
Alarm contacts for electronic service indicator
M407 Cooling Hose - Reinforced Rubber (-40 to 100°C) 6 meters (20 feet)
Net Weight (actual weight varies with options selected) 8 kg (18 lbs)
Shipping Weight Approximately 9 kg (20 lbs)
OPTIONS
BSP to NPT Adaptor Kit KIT.00060
High Temperature Air Hoses (x 10m) [33ft] /HT_407
High Temperature Air Hoses (x6m) [20 ft] /HT6M_407
Water Separator /WS_400
315 Daniel Zenker Drive
200 IST Center
Horseheads, NY 14845
USA
T +1.607.562.4369
+1.800.432.1478
F +1.607.562.4392
Station Road
Alton, Hampshire
GU34 2PZ, UK
T 01420.541600
F 01420.541700
© Copyright 2009. All rights reserved for trademark and registered trademark
information.
The above specications may vary according to system conguration.
Mirion Technologies Incorporated reserves the right to amend or change the
information on this sheet without prior warning.
03/09
19501 144th Ave NE
Suite C400, Woodinville
WA 98072, USA
T +1 425 487 3385
F +1 425 4873375