FEATURES
Rugged, check frequency of the buzzer, locking
mechanism of the dosimeter during the transaction
●
3 indicator lamps for operation and access control
Standard USB interface ●
Locking mechanism of the dosimeter in the sleeve ●
USB interface ●
DSP based digital process ●
compatible with the DMC 2000S, X, XB and GN version ●
on request
●
compatible with software packages: LDMNet,
DOSICARE, DOSIFAST, DOSIMASS and LDM3000
LDM 250
Active Dosimetry - Readers
LDM 250
USB Desktop Dosimeter Reader
The LDM 250 reader operates using software packages
installed on computer (PC) and communicates with the
DMC 2000S, GN, X and XB dosimeters in pass-by data
exchange mode.
Associated to the DOSICARE or DOSIFAST software,
the LDM 250 reader is used as an interface to activate a
dosimeter (to switch in counting mode) or to deactivate
it (to switch in pause mode).
Associated to the DOSIMASS software, the LDM 250 is
used as an interface to read and write the internal data
of the dosimeter.
Driven by LDMNet software, the LDM 250 is able to
lock the dosimeter in the sleeve during all the transac-
tion, check the frequency emitted by the dosimeter in
alarm, switch on the dosimeter then release it, at the
end of the transaction.
health physics
A Mirion Technologies Division
Featuring:
LDM 250
Active Dosimetry - Readers
DESCRIPTION
Two-color electroluminescent diode used as ON/OFF
●
and data exchange indicator lamp
Two-color electroluminescent diode for ●
READY/BUSY indication
Two-color electroluminescent diode for ●
ACCESS/NO ACCESS indication
2 available versions ●
Sleeve for DMC 2000S, X and XB ○
Sleeve for DMC 2000S GN: ○ sleeve is able to receive
dosimeters DMC 2000S, X, XB, however the functions
locking of the dosimeter during the transaction and the
check of the tone of the buzzer cannot be insured in that
case.
Inside the case, there are 2 HE10,2 x 7- pin male ●
connectors for digital of 4 inputs and 4 digital outputs
USB interface ●
ELECTRICAL CHARACTERISTICS
Self powered through USB port except the locking ●
function
7 VDC - 0.7 A external power supply (not provided) for ●
the locking function
EMC: complies with and exceeds CE standards ●
MECHANICAL CHARACTERISTICS
Length: 212 mm (8.35 in)
●
Width: 126 mm (4.96 in) ●
Depth: 171 mm (6.73 in) ●
Weight: 1,3 kg (45.86 oz) ●
ENVIRONMENTAL CHARACTERISTICS
Operating temperature: 0°C to +50°C (32°F to 122°F) ●
Storage temperature: -10°C to +60°C (14°F to 140°F) ●
Humidity: 90 % HR (without condensation) ●
COMMUNICATION WITH DOSIMETERS
Handfree link inside the sleeve based on short ●
range high frequency bidirectional data exchange
Note : dosimeters can be detected outside the sleeve up to
20 - 30 cm away (7.87 and 11.81 in)
Health Physics
Division
Mirion Technologies (MGPI) Inc
5000 Highlands Parkway
Suite 150
Smyrna Georgia 30082
USA
T +1.770.432.2744
F +1.770.432.9179
Since norms, specifi cations and designs are subject to occasional change, please ask for confi rmation of the information given in this publication.
Mirion Technologies (MGPI) SA
BP 1
F-13113 Lamanon
France
T +33 (0) 4 90 59 59 59
F +33 (0) 4 90 59 55 18
Mirion Technologies (RADOS) Oy
P.O. Box 506
FIN-20101 Turku
Finland
T +358 2 468 4600
F +358 2 468 4601
Mirion Technolgies (RADOS) GmbH
Ruhrstrasse 49
DE-22761 Hamburg
Germany
T +49 (0) 40 851 93-0
F +49 (0)40 851 93 256
www.mirion.com
144501EN-B
Loading...