Mirion Technologies IST R90 User Manual

IST R90 Series Cables and Connectors are designed for use with all of the R90 Series nuclear cameras and have been specifically developed for nuclear applications underwater or in air.
All the IST R90 Series cameras have a very high radiation tol­erance which is partly achieved by their dual unit construction with the majority of the camera electronics being contained in a separate camera control unit (CCU) outside the active area. This design approach reduces radiation damage, while also ensuring easy service access. The CCU’s are linked to their associated cameras by single composite camera cables - with matching connectors - which provide all the necessary power, control and signal functions.
Rees Minikevlar 102.00.042
Features
• Air and underwater appplications
• Radiation tolerant
• Wide range
• Specifically developed for nuclear operations
• Site reterminable connectors
• Field proven design
31 core camera cable with kevlar strength member, XLPE cores, and polyure­thane elastomer jacket.
Cores
2 coaxials 75 ohm
1 screened quad (7 x 0.2mm) <.008”>
2 groups of 7 (each 7 x 0.2mm)
1 group of 5 (each 7 x 0.2mm)
3 singles (each 7 x 0.2mm)
3 earth returns (each 16 x 0.2mm)
Mechanical
Diameter ...............................................11.30mm <.44”> (±0.38mm)
(<.015”>
Installation bend radius ........................82mm min (3.2”)
Continuous flexing bend radius.............165mm min (6.5”)
Weight in air .........................................170g/m (.44 lb/yd)
Break strength .......................................324kg (714 lb)
Operating temp.range ...........................-20° to 70°C (-4°F to 158°F)
Total radiation dose .............................106 Gy (108 rads)
Electrical
75 ohm coaxial:
Characteristic impedance .....................75 ± 2 ohms
Attenuation ...........................................5.7 dB per 100m (328’) at 10 MHz
XLPE Insulated Cores:
dc resistance .........................................8.8 ohms per 100m (328’) nominal
Earth returns:
dc resistance .........................................4.0 ohms per 100m (328’) nominal
Imaging & Sensing Technology Corporation
TV36 102.00.019
R90 Series Cables
36 core camera cable with kevlar braid, XLPE cores and polyurethane jacket.
Cores
3 coaxials 75 ohm
1 group of 14 (each 7 x 0.16mm) <.006”>
1 screened group of 7 (each 7 x 0.16mm)
1 group of 4 (each 7 x 0.16mm)
1 screened group of 4 (each 7 x 0.32mm) <.012”>
4 singles (each 7 x 0.23mm) <.009”>
Rees Minicable R000CAB014
A special 31 core camera cable with a very small diameter and bend radius, polyester tape cores and polyester elastomer jacket.
Mechanical
Diameter................................................16.45mm <.65”> (max
16.90mm<.66”>)
Break strength .......................................1000 kg (2205 lb)
Minimum Installation bend radius ........100mm (4”)
Continuous flexing bend radius ............240mm (9.5”)
Weight in air .........................................0.34kg/m (.75 lb /yd)
Operating temp. range ..........................-20° to 80°C (-4°F to 176°F)
Total radiation dose ..............................106 Gy (108 rads)
Electrical
75 ohm coaxial:
Characteristic Impedance .....................75 ohms
Attenuation ...........................................4.7 dB per 100m at 10 MHz
Insulated Cores .....................................dc resistance at 20°C (68°F)
7 x 0.32 ..................................................3.59 ohms per 100 m (328’)
7 x 0.23 ..................................................6.83 ohms per 100 m (328’)
7 x 0.16 ..................................................14.4 ohms per 100 m max (328’)
Mechanical
Diameter................................................8.8mm <.35”>(±0.6mm) <0.2”>
Installation bend radius ........................ 45mm min.(1.8”)
Continuous fllexing bend radius ...........90mm (3.5”)
Weight in air .........................................0.14kg/m (0.3lb/yd)
Operating temp. range .........................-20° to 80°C (-4°F to 176°F)
Total radiation dose ..............................106 Gy (108 rads)
Cores
2 coaxials 75 ohm
1 screened quad (7 x 0.2mm) <.008”>
21 singles (each 7 x 0.2mm)
3 singles (each 19 x 0.2mm)
Electrical
75 ohm coaxials:
Characteristic impedance ....................75 ohm ± 2 ohms
Attenuation ...........................................5.7 dB per 100m (328’) at 10 MHz
Polyester Tape Insulated cores .............dc resistance at 20°C (68°F)
7 x 0.2mm ..............................................8.8 ohms per 100m (328’)
19 x 0.2mm ............................................3.2 ohms per 100m (328’)
REES Cables & Connectors
Standard Cables
Separation (m) Cable Camera to CCU Operation Notes
TV36 200 Lighting current 6A max
102.00.019 Full R937 options available 17mm dia (.67”)
Minikevlar 100 Lighting current 6A max
102.00.042 R937 has reduced options 11mm dia (.43”)
Rees Flatform Cables
Flatform festoon cables are available to special order.
Special Cables
Separation (m) Cable Camera to CCU Operation Notes
Minicable 100 Lighting current 5A max R000CAB014 R937 has reduced options
8.8mm dia (.35”)
Spiral cable 100 Lighting Current 5A max
8.8mm dia (.35”) R937 has reduced options 50mm dia coils (2”)
Flatform Cable Full application specifications are required before this cable can be considered.
Rees Minicable Spiral
Special expandable spiral versions for the Rees Minicable are available.
Video Control Cable CAB.00640
This cable combines a video cable and a two core control cable into one figure of 8 assembly. Cores are constructed in PVC (cellular polyethylene for the coaxial) with PVC jackets.
The CAB.00640 cable is designed for use in air and is mainly used in applications specifying Rees Operator Control Units, where it is used as the interconnecting cable to any master control and video switching matrix used, and where RS485 control system philosophies have been adopted.
Video Cable CAB.00650
This is a high quality coaxial cable intended for fixed installation. It com­prises 1 x 1.15mm (.45”) plain copper conductor with solid polyethylene dielectric, plain copper wire braid and black PVC sheath.
Cores
1 screened twisted pair
1 coaxial
Mechanical
Diameter................................................6.15mm (.24”) & 11.30mm (.44”)
Mechanical
Diameter ..............................................10.3mm (.405”)
Minimum installation bend radius .......125mm (4.9”)
Weight in air ........................................0.15kg/m (.33lb/yd)
Operating temperature range ...............-30°C to 85°C (-22°F to 185°F)
Electrical
Characteristic Impedance .....................75 ohms
Attenuation ...........................................1.6 dB per 100m (328’) at 10 MHz.
Standard Site Reterminable Underwater Connectors
IST underwater connectors are constructed in stainless steel. All in­terconnections are protected by seals. Terminations are made using high quality contacts. All of the R90 series underwater connectors share the same, basic mechanical design with size and inserts dependent upon the camera cable and/or camera selected.
Camera Cable Diameter Length Connector Insert Contacts Center (mm) (mm)
R930CNR04A 24 pin Solder Minikevlar 30 117 R930CNR06A 24 pin Solder TV36 33 117 R930CNR08A 24 pin Solder Minicable 30 117
Special Underwater Molded Connectors
A range of moulded connectors are available to special order. Molded connectors cannot be reterminated, but they can operate to a depths in excess of 200 m (656’”). The minimum installation distance from the back of the camera (with cable leaving at right angles) is 230mm (9”) with TV36, 210mm (8.3”) with Minikevlar, and 180mm (7.8”) with Minicable.
Break strength with minikevlar or TV36 is 75 kg (165 lb).
Depth rating ..............................................100 m (328’)
Minimum installation distance from camera connector to cable path perpendicular to cameras axis
with TV36: .................................................270mm (10.6”)
With Minikevlar: .......................................205mm (8.1”)
With Minicable: ........................................170mm (6.6”)
Voltage Rating: .........................................600 V dc
Current Rating: ..........................................5 A
Break Strength w/Minikevlar or TV36........Better than 75 kg (165lb)
Camera/CCU Mating Connectors
Camera CCU
Cable Type R93 Mk 2/Mk 3 Mk 3 Plug End (20 way) (24 way) (48 way) Minicable R930CNR08A R930CNR12A R930CNR09A R937CNR07A Minikevlar R930CNR04A R930CNR10A R930CNR05A R937CNR07A TV36 R930CNR06A R930CNR11A R930CNR07A R937CNR07A
Rees Underwater Moulded Connector
Rees 90° Stainless Steel Connector
Use of the 90° connector reduces the total bend radius from the back of the camera to the cable perpendicular to 75mm (3”) for all cable types.
Imaging and Sensing Technology Corporation
204 IST Center Horseheads, NY 14845 USA Tel: 607-562-4300 800-432-1478 Fax: 607-562-4392 E-mail: rees@istcorp.com
19501 144th Avenue NE Suite F1100 Woodinville, WA 98072 USA Tel: 425-881-0778 Fax: 425-869-0667 E-mail: rees@istcorp.com
12954 Stone Creek Dr. Suite C Pickerington, OH 43147 USA Tel: 614-367-2050 Fax: 614-367-2464 E-mail: rees@istcorp.com
Station Road Alton, Hampshire GU34 2PZ, UK Tel: 01420 541600 Fax: 01420 541700 E-mail: info@istcorp.co.uk
Kaiser-Konrad-Str 93a D 53225 Bonn Deutschland Tel: 0228 625088 Fax: 0228 626300 E-mail: info@istcorp.co.uk
1105 IST reserves the right to amend or change the information on this sheet without prior warning.
w w w . i s t i m a g i n g . c o m
Loading...