Mirion Technologies ID LU Users manual
MIRION PROPRIETARY INFORMATION
Dosimetry Services
Division
instadose 2 Dosimetry
Communication Specifications
instaLink™ USB:
The instaLink USB allows workstations connected to the
internet to transmit dose data to Mirion’s secure servers.
For the instaLink USB to work it must be connected
to the workstation at all times and the instaLink USB
software must be installed on the workstation. The
software has a small footprint of less than 1Mb.
KEY FEATURES
®
Bluetooth
compliant
• Supports master and slave modes
• 4+ simultaneous connection is master mode
Integrated Bluetooth low energy stack
• GAP, GATT, L2CAP, SMP
• Bluetooth low energy proles
Radio performance:
• TX power: +4dBm to -23dBm
• RX sensitivity: -87dBm to -93dBm
• USB, USB HID and virtual COM port emulation
• Bluetooth end product, CE, and FCC qualied
Hardware Features:
• Bluetooth low energy radio
• Built-in antenna
Certifications:
• Bluetooth wireless technology 4.0
• CE and FCC
REQUIREMENTS / FUNCTIONALITY OF SOFTWARE:
• Internet Connectivity
• Runs on Window XP, Vista, and 7
• Access to *.instadose.com / port 443
• During installation, the application will be added to the
StartUp menu – the application will launch when the
workstation boots up
• The application window does not need to be open for a
device to be read
• If the workstation is hibernating (sleeping) communication
with instadose 2 dosimeters will not occur
wireless technology version 4.0, single mode
INSTALLATION STEPS
The instaLink USB software will work on Windows XP, Vista, and
7, Windows 8 is currently unavailable.
NOTE: DO NOT plug in the instaLink USB until after the software
has been installed.
To install the instaLink USB software onto workstations you must
have administration privileges and follow the steps below.
• Go to www.instadose.com and login with the given
username and password
• [Click] Download software under the Manage section of
the home screen
• [Click] download instaLink USB software and follow the
instructions.
instaLink™ Hotspot Station:
The instaLink hotspot station securely transmits
dose data to Mirion’s server. The station comes with
a power cord and mounting brackets. The instaLink
hotspot station can be connected to your network
by either Ethernet or WiFi. The instaLink comes
with congurable Wi/Ethernet options: WPA, SID,
Proxies, etc.
KEY FEATURES:
• Software comes preloaded and is designed to be
functional upon arrival at the customer site
• instaLink can be plugged directly into a network – Once
connected it will attempt to connect to instadose web
service
Bluetooth wireless technology version 4.0, single mode compliant
• Supports master and slave modes
• 4+ simultaneous connection is master mode
Integrated Bluetooth low energy stack
• GAP, GATT, L2CAP, SMP
• Bluetooth low energy proles
Radio performance:
• TX power: +4dBm to -23dBm
• RX sensitivity: -87dBm to -93dBm
• USB, USB HID and virtual COM port emulation
• Bluetooth end product, CE, and FCC qualied
LIT4396_0_ US
Advertiser
MIRION PROPRIETARY INFORMATION
Hardware Features:
Bluetoothlow energy radio
•
• Built-in antenna
Certifications:
• Blueto
othwireless technology version 4.0
• CE and FCC
DISCOVERY / CONFIGURATION APPLICATION:
Install the instaLink discovery conguration software to
scan and detect instaLink hotspots connected to the
network. IT departments can congure network settings
and unique identiers for each hotspot.
INSTALLATION STEPS
• Plug a instaLink hotspot into your hardwired network.
• Install and run the discovery application software. They
software will identify each instLkink hotspot connected
to the network. The following options are congurable:
• WiFi – sid and access credentials (username /
Password)
• Proxy / Network security settings
• Unique instaLink Identier (Name) to assist in data
collection statistics
Bluetooth® Smart Dosimeter:
The instadose 2 dosimeter utilizes
Technology to transmit dose data to a variety of devices. A
facility can select from:
• iPhones or iPads with the instadose app installed
BluetoothLow Energy (BLE)
FREQUENCY HOPPING:
Bluetooth low energy technology uses the adaptive
frequency hopping common to all versions of Bluetooth
technology to minimize interference from other
technologies in the 2.4 GHz ISM Band. Efcient multi-path
benets increase the link budgets and range.
STRONG SECURITY:
Full AES-128 encryption using CCM to provide strong
encryption and authentication of data packets.
TOPOLOGY:
Bluetooth low energy technology uses a 32 bit access
address on every packet for each slave. The technology is
optimized for one-to-one connections while allowing oneto-many connections using a star topology.
A new Bluetooth Smart feature is the “advertising”
functionality. The instadose 2 dosimeter (acting as a slave)
can in this way announce that it has dose readings to
transmit to the master (iPhone, iPad, instaLink USB or
instaLink).
Figure 4 shows how the instadose 2 dosimeter communicates
reads.
The instadose 2 dosimeter periodically sends messages
and will always be a slave once the connection is
established. An ipad, iPhone, or instaLink product is ready
to receive an advertisement message and a connection
request. The ipad, iPhone, or instaLink product will always
be a master once the connection is established.
Advertiser
• PCs with BLE or with the instaLink-USB connected
• instaLink Hotspot Station
DATA TRANSFERS:
Bluetooth low energy technology supports very short data
Initiator
Scanner
Figure 4
packets (8 octet minimum up to 27 octets maximum) that
are transferred at 1 Mbps. All connections use advanced
sniff-sub rating to achieve ultra low duty cycles.
iPad and iPhone are trademarks of Apple Inc., registered in the U.S. and other countries. The Bluetooth®word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by
Mirion Technologies is under license. Other trademarks and trade names are those of their respective owners.
© Copyright 2013, All rights reserved. For trademark and registered trademark information.
Specications are subject to occasional change, please ask for conrmation of the information given in this publication
conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation..
2652 McGaw Avenue
Irvine, CA 92614
USA
U.S./Canada +1.800.251.3331
U.K. 0170.629.9329
Worldwide +1.949.419.1000
www.mirion.com
. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
LIT4396_0_ US
Loading...