
Integrated Camera Outstation
RC510
REES
Features
• Receiver, pan & tilt, and enclosure with
an Integrated Optics Package (IOP)
• Auto focus with manual override
• Programmable camera settings
• Auto iris with manual override
• Integral multi-protocol receiver/driver
• Easy to install: Quick and simple
electrical connections
• Variable speed pan: .1 to 100 °/sec.
with proportional pan
• 360° continuous pan rotation
• Operational in 90mph wind conditions;
can withstand wind velocity up to
130mph
• Pan preset speed of 100°/sec. in
50mph wind and 50°/sec. in 90mph
winds
• Tilt range of +33° to -83° from
horizontal
• Preset positioning, patterns, multiple
scan modes
• Designed for minimal maintenance; no
gears to adjust
• Lightweight aluminum construction
• Indoor/outdoor applications
Imaging & Sensing Technology Corporation

Specifications and Performance
Electrical
Input Voltage ................................... 24, 120, or 230 VAC, 50/60 Hz;
switch selectable for 120/230 VAC
inputs ±10%
Power Consumption ........................ Maximum 70 VA per system
Heater and Defroster .......................Thermostatically controlled
Electrical Connections ..................... Two power source connections made
at mount location with wire splices
and one ground wire splice; one BNC
receptacle and four wire splices at
mount location for RS-422 D and P
protocols; two wire splices for open
collector auxiliary output
Aux 2 ................................................Open collector output with 2-second
activation; connected relay must
require no more than 32 VDC and 40
mA to energize relay coil; wire length
between RC510 and relay must be
less than 100 ft (30 m)
Video Coaxial Cable
Max. Wiring Distances ....................
Cable Type* Max. Distance
......................................................... RG59/U 750 feet (229m)
RG6/U 1,000 feet (305m)
RG11/U 1,500 feet (457m)
General
Construction .................................... Die-cast, extruded and sheet
aluminum; stainless steel hardware
Finish ............................................... Gray polyester powder coat
Viewing Window ............................. 0.23" (5.84 mm) thick, optically clear
impact/scratch-resistant coated
®
LEXAN
Operating Temperature.................... -50° to 122°F (-45° to 50°C) for
sustained system operation or 140°F
(60°C) absolute maximum. Within two
hours after power-up, the entire unit
can de-ice and be operational from a
temperature of -13°F (-25°C).
Operating Environment ....................Will remain operational in 90mph
wind conditions; withstands 130mph
Dimensions ...................................... See dimension drawing
Weight .............................................
w/Pedestal Adaptor w/Wall Mount
Unit: Standard w/IOP 20lb (9.0)kg 22lb. (9.9kg)
w/Wiper and IOP 21lb (9.5kg) 23lb (10.4kg)
Shipping: Standard w/IOP 25lb (11.3)kg 28lb. (12.6kg)
w/Wiper and IOP 26lb (11.7kg) 29lb (13.1kg)
5.2
(13.3)
* Minimum cable requirements: 75 ohms impedance; all-copper center
conductor; all copper braided shield with 95% braid coverage
Mechanical
Pan Movement ................................ 360° Continuous pan rotation
Vertical Tilt ....................................... Unobstructed +33° to -83°
Variable Pan/Tilt Speed ...................Pan: 0.1° to 40°/sec variable-speed
operation, 100°/sec Turbo
Tilt: 0.1° to 20°/sec variable-speed
operation
Preset Speeds ..................................Pan: 100°/sec
Tilt: 30°/sec
Camera Mounting ............................Integrated camera sled assembly
Latches ............................................ One link-lock, No. 3 stainless-steel
latch; can be secured with padlock
(not supplied)
Certifications/Ratings
• CE, Class B (all models)
• UL listed to Standard 2044 (NTSC models)
• cUL listed to CSA Standard 22.2 No. 1-94 (NTSC models)
• FCC, Class B (NTSC models)
• NEMA 4X and IP66
14.6
(37.0)
9.8
(24.9)
3.6
(9.1)
7. 7
(19.7)
13.3
(33.9)
3.9
(9.9)
17.45
(44.32)
LEXAN® is a registered trademark of the General Electric Company.
7. 9
(20.0)