Mirion Technologies DBR-1 User Manual
health physics
A Mirion Technologies Division
DBR-1 DIS Dosimeter Reader
Passive Dosimetry
FEATURES
stand-alone use or interface to WinELD Dose •
Management Software
display of Session and Assignment doses and dose •
reset capability
EIA RS-232C serial or optional 10Base-T internal •
Ethernet LAN
interface
back-up batteries and internal bu er memory for •
securing the operation in all conditions
rugged construction with heavy duty keypad•
wall mounting option•
PTB approved con guration available•
DBR-1
DIS Dosimeter Reader
The DBR-1 Dosimeter Reader is designed to read
DIS-1, DIS-1H3 and EDIS-1 dosimeters assembled in
the DDH snap-in dosimeter holders.
The dosimeter badge is simply inserted into the
reader head slot for dose read-outs. The design
of the slot prevents the dosimeter from being
inserted incorrectly.
Just plug the DIS-1, DIS-1H3 or EDIS-1 dosimeter
into the Dosimeter Reader and in a couple of sec-
onds the Hp(10), Hp(0.07) , Hp(3) or H*(10) doses are
shown on the reader display and stored in a
bu er memory. The instant reading capability
allows the user to control his/her dose on a
daily basis and makes the monthly or quarterly
change of the dosimeter unnecessary.
The control period can be inde nite (in excess of
a year), because the dose readings can be
transmitted via electronic method rather than
physically sending the badge away for reading
and recording of o cial doses.
www.mirion.com
Mirion Technologies (MGPI) Inc
5000 Highlands Parkway
Suite 150
Smyrna Georgia 30082
USA
T +1.770.432.2744
F +1.770.432.9179
Mirion Technologies (MGPI) SA
BP 1
F-13113 Lamanon
France
T +33 (0) 4 90 59 59 59
F +33 (0) 4 90 59 55 18
Mirion Technologies (RADOS) Oy
P.O. Box 506
FIN-20101 Turku
Finland
T +358 2 4684 600
F +358 2 4684 601
Mirion Technologies (RADOS) GmbH
Ruhrstrasse 49
D-22761 Hamburg
Germany
T +49 40 85193 0
F +49 40 85193 256
DBR-1 DIS Dosimeter Reader
Passive Dosimetry
20996031_DBRI_EN_B
TECHNICAL SPECIFICATIONS:
Physical Characteristics gold plated connector for dosimeter reading •
rugged metal case•
size (WxHxD): 250 x 265 x 210 mm (9.84 x 10.43 x 8.27 in)•
weight: 8.5 kg (18.7 lbs)•
Functional Characteristics
display of Hp(10), Hp(0.07) ,Hp(3) and Hp*(10) doses•
reset of the session doses•
display of Session/Assignment doses•
display of Remaining Dose Capacities•
real time clock•
con gurable operations•
easy to check calibration with optional DBR Reader Calibration Plug•
display and keypad controlled by the WinELD software•
Assignment/Session reset controlled by the WinELD software•
internal bu er memory for 256 o -line dose records•
Mechanical Characteristics 2x16 character alphanumeric LCD display with LED backlight, 9.5 mm (0.37 in) •
digits
heavy duty 16-key keypad•
power on/o by key switch•
EIA RS-232C serial port or optional 10Base-T internal Ethernet LAN adapter•
table top mounting •
optional wall mounting kit•
Environmental Characterstics operating temperature: •
- from +10 °C to +40 °C (50 °F to 104 °F)
storage temperature: •
- from -10 °C to +60 °C (14 °F to 140 °F)
humidity: •
- 90% RH (non condensing)
Electrical Characteristics mains voltage 100-240 VAC, 50-60 Hz, 0.2 A•
built-in back-up battery, 3 Ah, for minimum 16 h operation•
complies with CE standard•
Con gurable Operations Session Dose reset in o -line mode •
Assignment or Session Dose primary display•
Hard Reset controlled by the WinELD software•
automatic dose print-out•
Sv/rem dose unit selection•
Keypad operation (enabled/disabled)•
«On-line», «O -line» and «Please wait» texts can be customized by the •
WinELD software
US or European Date/Time format•
Loading...