Mircom FA-300-3DDR, FR-320-R, FA-300-6DDR, FX-350-60-DR, FR-320-DR Installation Instructions Manual

FX-350, FA-300 and FR-320 Series

17"

22.5"

Adhere trim ring to

wall surface around

the FA-300 or FR-320

backbox.

PLACE FA-300-TRB TRIM RING OVER BACKBOX

14.5"

4

.

5

"

11"

20.0"

1.5"

4.0"

14.5"

3.5"

1"

3.5" is the maximum depth
for semi -fl ush mounting
using the flush trim ring

1" is the minimum depth

above the wal l r equired
for semi -fl ush mounti ng
using the flus h tri m ring

Mounting Holes for
Surface Mounting

Mounting Holes for
Surface Mounting

Addendum for New Chassis

Installation Instructions

Mechanical Installation for the FX-350, FA-300 and FR-320 Series Backboxes
and Chassis

All the FX-350, FA-300 Series Fire Alarm Panels including the FR-320 Series have a new chassis. See the following dia­grams; Figure 1 for the small panel versions of all the series and Figure 2 for the larger panel version of the FX-350 and
FA-300 series.

Figure 1: Backbox and Trim Ring Dimensions for Models FA-300-3DR/-3DDR,

FA-300-6DDR, FX-350-60-DR and FR-320-R/-W, FR-320-DR/-DW

LT- 1087 Rev. 0 Nov 2010 Page 1 of 2

Figure 2: Backbox and Trim Ring Dimensions for Models FX-351-LW/-LDW/-LDR,

Mounting Holes

Mounting Holes

11”

20.5”

1.5”

14.5”

14.5”

26”

4”

4.5”

17”

28.5”

Adheretrim ring to

wall surface around

the FA- 300 backbox.

PLACE FA-UNIV-TRB TRI M RING OVER BACKBOX

TRIM RING

WALL

WOOD OR

METAL STUD

BACKBOX

FX-353-LW/-LDR, FA-301-8LR/-8LW/-8LDR/W and FA-301-12LR/-12LW,
FA-301-12LDR/-12LDW, FA-301-12 DDR

Mounting the Boards to the Chassis

The main board is mounted to the chassis and is shipped out this way. All adder modules are mounted in the same manner
as explained in the respective fire alarm manual.

Figure 3: Cross-Section of Flush Mounted Backbox

Wiring

All wiring is as explained in the respective fire alarm panel manual.

LT- 1087 Rev. 0 Nov 2010 Page 2 of 2