Mira Showers Advance Installation Instructions

Mira Advance

THERMOSTATIC

ELECTRIC SHOWER

8.7 and 9.8 kW

These instructions must be left with the user

User Guide

1

1306246-W5-A

Introduction

Thank you for purchasing a quality Mira product. To enjoy
the full potential of your new product, please take time to
read this guide thoroughly, having done so, keep it handy
for future reference.

Guarantee

For domestic installations, Mira Showers guarantee the
Mira Advance against any defect in materials or workmanship
for a period of two years from the date of purchase (shower

ttings for one year).

For non-domestic installations, Mira Showers guarantee
the Mira Advance against any defect in materials or
workmanship for a period of one year from the date of
purchase.

For Terms and Conditions refer to the website.

Safety Information

For continued safe operation, follow all instructions,
warnings and cautions contained in this guide and on the
shower unit. Failure to follow the instructions provided
with the shower will invalidate the guarantee.

1306246-W5-A

2

WARNING! TO REDUCE THE RISK OF FIRE, ELECTRIC
SHOCK OR INJURY:

1. Installation of the shower must be carried out by qualied,

competent personnel. Installers please read installation
instructions before installing the shower.

2. The shower must be operated and maintained in
accordance with the requirements of this guide. Make
sure you fully understand how to operate the shower
before use, read all instructions and retain this guide for
future reference.

3. DO NOT remove front cover. Mains connections are
exposed when the front cover is removed.

4. DO NOT switch the shower on if there is a possibility that

the water in the shower unit or ttings is frozen.

5. DO NOT switch the shower on if water leaks from the
shower unit. Isolate the electrical supply to the shower
immediately.

6. DO NOT switch the shower on if the case appears to be

damaged or incorrectly tted. Isolate the electrical supply

to the shower immediately.

7. The shower can be used by children aged from 8
years and above and persons with reduced physical,
sensory or mental capabilities or lack of experience
and knowledge if they have been given supervision or
instruction concerning use of the appliance in a safe way

and understand the hazards involved. Children must not

be allowed to play with the shower.

8. ALWAYS check the water temperature is safe before
entering the shower and after adjusting the temperature.

3

1306246-W5-A

9. DO NOT allow children to clean or perform any user
maintenance to the shower unit without supervision.

10. DO NOT connect the outlet of the shower to any tap,
control valve, trigger handset or other device intended

to restrict the water outlet ow. Fit only the Kohler Mira
showerhead as supplied with this product, only Kohler

Mira recommended accessories must be used.

11. DO NOT perform any unspecied modications, drill or
cut holes in the shower or ttings other than instructed
by this guide. When servicing only use genuine Kohler

Mira replacement parts.

12. If the shower is dismantled during installation or servicing
then, upon completion, an inspection must be made to
ensure all electrical connections are tight and that there
are no leaks.

13. There are no user serviceable components beneath
the cover of this appliance and ELECTRICAL MAINS

CONNECTIONS ARE EXPOSED IF THE COVER IS
REMOVED. Only a competent tradesperson should

remove the cover.

14. The water supplies to this product must be isolated if
the product is not to be used for a long period of time. If

the product or pipework is at risk of freezing during this

period they should also be drained of water.

15. ALWAYS switch off the appliance at electrical isolating
switch when not in use.

16. DO NOT position the handset to spray water directly on
to the appliance. E.g. when cleaning shower control.

17. The showerhead should be descaled regularly, a blocked

showerhead can restrict the ow rate and may cause

damage to the shower.

1306246-W5-A

4

Using the Shower

Each time the shower is operated it will conrm its status
during the start-up process, conrming the mode setting and

when the temperature is reached. Note! Further temperature

adjustments during showering will not conrm temperature

has been reached.

Standard Mode

When starting in standard mode the product will beep
once when the start/stop button is pressed and the amber
status light & white start/stop light will pulse. When the set
temperature has been achieved the lights will stop pulsing

and the shower will beep to conrm

BEAB Mode

When starting in BEAB care mode the product will beep three
times when the start/stop button is pressed and the green
status light & white start/stop light will pulse. When the set
temperature has been achieved the lights will stop pulsing

and the shower will beep to conrm.

Starting from Cold

When starting the shower with temperature set in cold
position the product will beep once when the start/stop button
is pressed and the blue status light & white start/stop light

will pulse, when full cold ow is achieved the lights will stop
pulsing and the shower will beep to conrm. If the shower

temperature is adjusted to a higher temperature from cold
in either standard mode the amber status light or BEAB
mode the green status light will be indicated but there will

be no further indication to conrm set temperature has been

achieved.

5

1306246-W5-A