Miranda picoLink FIO-991p-TT-LC, picoLink FIO-991p-R-LC, picoLink FIO-991p-RT-LC, picoLink FIO-991p-RD-LC, picoLink FIO-991p Manual To Installation And Operation

picoLink series

FIO-991p

Standalone 3Gbps/HD/SD/MADI SDI

optical-to-electrical

/ electrical-to-optical converter

Guide to Installation and Operation

M947-9900-101

31 Jan 2013

Miranda Technologies

3499 Douglas-B.-Floreani

St-Laurent, Québec, Canada H4S 1Y6

Tel. [phone]

Fax. [phone]

www.miranda.com

© 2013 Miranda Technologies.

GUIDE TO INSTALLATION AND OPERATION

FIO-991p

Contact Miranda

For technical assistance, please contact the Miranda Technical
Support centre nearest you:

Americas

Telephone:

[phone]

e-mail:

[e-mail]

Asia

Telephone:

[phone]

e-mail:

[e-mail]

Europe, Middle East, Africa, UK

Telephone:

[phone]

e-mail:

[e-mail]

China

Telephone:

[phone]

e-mail:

[e-mail]

France (only)

Telephone:

[phone]

e-mail:

[e-mail]

Visit our web site at www.miranda.com

GUIDE TO INSTALLATION AND OPERATION

FIO-991p

Radio Frequency Interference and Immunity

T

his equipment has been tested for verification of compliance with

FCC Part 15, Subpart B requirements for Class A digital devices.

NOTE: This equipment has been tested and found to comply
with the limits for a Class A digital device, pursuant to part 15 of
the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference when the equipment is
operated in a commercial environment. This equipment
generates, uses, and can radiate radio frequency energy and, if
not installed and used in accordance with the instruction manual,
may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause
harmful interference in which case the user will be required to
correct the interference at his own expense.

This equipment has been tested and found to comply with the
requirements of the EMC directive 2004/108/CE:

• EN 55022 Conducted emissions, Class A

• EN 55022 Radiated emissions, Class A

• EN 61000-4-2 Electrostatic discharge immunity

• EN 61000-4-3 Radiated electromagnetic field immunity - RF

• EN 61000-4-8 Power frequency magnetic field immunity

• EN 61000-4-11 Voltage dips, short-interruption and voltage

variation immunity

• ENV50204 Radiated EMF immunity – RF 900MHz pulsed
Power supplies:

pL-tray frame power supply
5VDC, 3.0A, I.T.E. external power supply

• CSA/UL 60950-1 for Information Technology Equipment

GUIDE TO INSTALLATION AND OPERATION

FIO-991p

Table of Contents

1 FIO-991p Standalone 3G/HD/SD/MADI electrical/optical

converter ..................................................................................... 1

1.1 Introduction ................................................................................. 1

1.2 Features ...................................................................................... 1

1.3 Product Overview ........................................................................ 2

1.4 Product Variants ......................................................................... 2

FIO-991p-R-LC ............................................................................... 3

FIO-991p-RR-LC ............................................................................ 3

FIO-991p-T-LC ............................................................................... 4

FIO-991p-TT-LC ............................................................................. 5

FIO-991p-RT-LC ............................................................................ 7

FIO-991p-RD-LC ............................................................................ 8

FIO-991p-MADI-RT-M13-LC .......................................................... 9

2 Installation .......................................................................... 11

2.1 Power Supply ............................................................................ 11

2.2 Power Adapter .......................................................................... 11

2.3 Installation in the pL Tray .......................................................... 11

2.4 Fiber Optic Interfac e ................................................................. 12

2.5 3G/HD/SD Digital Video and MADI Digital Audio Connections . 14

3 Operation ............................................................................ 15

3.1 Status LED assignments ........................................................... 15

3.2 Status LED behavior ................................................................. 15

4 Specifications .................................................................... 16

GUIDE TO INSTALLATION AND OPERATION

FIO-991p | 1

1 FIO-991p Standalone 3G/HD/SD/MADI electrical/optical

converter

1.1 Introduction

The FIO-991p series are flexible serial digital video to/from fiber converters.
They are designed for SD, HD and 3G serial video as well as compressed
bit-streams (DVB-ASI) and MADI digital audio. The series supports any data
rate within the range of 19.4 Mbps to 2.97 Gbps and provides a reclocked
serial digital video from 270Mbps to 2.97 Gbps. The FIO-991p series offers
eight different main configurations: Single or dual channels Tx, single or dual
channels Rx, bi-directional Rx/Tx and an Rx/Tx repeater with electrical drop.
The series is based on hot-swappable SFP modules that provide easy
product maintenance and flexibility when multiple wavelengths are needed
(as for CWDM).

1.2 Features

• Convenient 3gbps/HD/SD and MADI stand alo ne fiber inter f a ces

• Supports any serial data rate from 19.4 Mbps (ATSC) to 2.97Gbps

(3G SDI)

• Re-clocked serial digital video from 270Mbps to 2.97Gbps

• Provides unidirectional or bi-directional interface between serial

digital and fiber optics

• Single or Dual Tx, Single or Dual Rx or combined Rx/Tx
configurations

• Supports Multiple wavelength from the standard 1310 nm, 1550 nm
to multiple CWDM wavelengths

• Well integrated WDM (1310/1550) solution for dual Tx, Dual Rx and
Rx/Tx cards

• Ideal for long video run with “Hum” immunity

• Presence/loss of signal alarm

• Optical Power level out-of-range warning (receiver only)

• The SFP modules are fully hot swappable.

• Operation from 5 Volts DC.

GUIDE TO INSTALLATION AND OPERATION

2 | FIO-991p

1.3 Product Overview

Figure 1 illustrates the FIO-991p's major parts and their locations. The SFP
module is inserted into the socket on the end of the FIO-991p chassis, and
the fiber is plugged into the SFP module. The 3G/HD/SD digital video inputs
and outputs appear on BNC c onne ctor s at the opposit e en d of the chas sis.
Input status and SFP module status are provided by the status LEDs.
Finally, the power source is connected to the lockable power connector.

Figure 1: Overall view of the FIO-991p

1.4 Produc t Variants

The FIO-991p is available in eight different versions, based on the I/O
configuration. They are distinguished by the model designation on the label.
Within each version, some variations in functionality may be available by
selecting the SFP module.

Fiber SFP module

Power connector

I/O BNCs

Status LEDs

GUIDE TO INSTALLATION AND OPERATION

FIO-991p | 3

FIO-991p-R-LC

Single optical receiver, double 3G/HD/SD SDI output

FIO-991p-RR-LC

Dual optical receivers, dual 3G/HD/SD SDI outputs

FIO-991p-RR-LC (Dual Rx)

FIO-991p-R-LC (Single Rx)

Optical

Rx

Optical

Rx

FIBER Rx A

FIBER Rx B

3G/HD/SD
SDI OUT A

3G/HD/SD
SDI OUT B

Optical

Rx

FIBER Rx

3G/HD/SD
SDI OUT 1

3G/HD/SD
SDI OUT 2