Miranda picoLink FIO-991p-TT-LC, picoLink FIO-991p-R-LC, picoLink FIO-991p-RT-LC, picoLink FIO-991p-RD-LC, picoLink FIO-991p Manual To Installation And Operation

...
picoLink series
FIO-991p
Standalone 3Gbps/HD/SD/MADI SDI
optical-to-electrical
Guide to Installation and Operation
M947-9900-101
31 Jan 2013
Miranda Technologies
3499 Douglas-B.-Floreani
St-Laurent, Québec, Canada H4S 1Y6
Tel. 514-333-1772
Fax. 514-333-9828
www.miranda.com
© 2013 Miranda Technologies.
GUIDE TO INSTALLATION AND OPERATION
FIO-991p
Contact Miranda
For technical assistance, please contact the Miranda Technical Support centre nearest you:
Americas
Telephone:
+1-800-224-7882
e-mail:
support@miranda.com
Asia
Telephone:
+852-2539-6987
e-mail:
asiatech@miranda.com
Europe, Middle East, Africa, UK
Telephone:
+44 1189 523444
e-mail:
eurotech@miranda.com
China
Telephone:
+86-10-5873-1814
e-mail:
asiatech@miranda.com
France (only)
Telephone:
+33 (0) 1 55 86 87 88
e-mail:
eurotech@miranda.com
Visit our web site at www.miranda.com
GUIDE TO INSTALLATION AND OPERATION
FIO-991p
Radio Frequency Interference and Immunity
T
his equipment has been tested for verification of compliance with
FCC Part 15, Subpart B requirements for Class A digital devices.
NOTE: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.
This equipment has been tested and found to comply with the requirements of the EMC directive 2004/108/CE:
EN 55022 Conducted emissions, Class A
EN 55022 Radiated emissions, Class A
EN 61000-4-2 Electrostatic discharge immunity
EN 61000-4-3 Radiated electromagnetic field immunity - RF
EN 61000-4-8 Power frequency magnetic field immunity
EN 61000-4-11 Voltage dips, short-interruption and voltage
variation immunity
ENV50204 Radiated EMF immunity – RF 900MHz pulsed Power supplies:
pL-tray frame power supply 5VDC, 3.0A, I.T.E. external power supply
CSA/UL 60950-1 for Information Technology Equipment
GUIDE TO INSTALLATION AND OPERATION
FIO-991p
Table of Contents
1 FIO-991p Standalone 3G/HD/SD/MADI electrical/optical
converter ..................................................................................... 1
1.1 Introduction ................................................................................. 1
1.2 Features ...................................................................................... 1
1.3 Product Overview ........................................................................ 2
1.4 Product Variants ......................................................................... 2
FIO-991p-R-LC ............................................................................... 3
FIO-991p-RR-LC ............................................................................ 3
FIO-991p-T-LC ............................................................................... 4
FIO-991p-TT-LC ............................................................................. 5
FIO-991p-RT-LC ............................................................................ 7
FIO-991p-RD-LC ............................................................................ 8
FIO-991p-MADI-RT-M13-LC .......................................................... 9
2 Installation .......................................................................... 11
2.1 Power Supply ............................................................................ 11
2.2 Power Adapter .......................................................................... 11
2.3 Installation in the pL Tray .......................................................... 11
2.4 Fiber Optic Interfac e ................................................................. 12
2.5 3G/HD/SD Digital Video and MADI Digital Audio Connections . 14
3 Operation ............................................................................ 15
3.1 Status LED assignments ........................................................... 15
3.2 Status LED behavior ................................................................. 15
4 Specifications .................................................................... 16
GUIDE TO INSTALLATION AND OPERATION
FIO-991p | 1
1 FIO-991p Standalone 3G/HD/SD/MADI electrical/optical
converter
1.1 Introduction
The FIO-991p series are flexible serial digital video to/from fiber converters. They are designed for SD, HD and 3G serial video as well as compressed bit-streams (DVB-ASI) and MADI digital audio. The series supports any data rate within the range of 19.4 Mbps to 2.97 Gbps and provides a reclocked serial digital video from 270Mbps to 2.97 Gbps. The FIO-991p series offers eight different main configurations: Single or dual channels Tx, single or dual channels Rx, bi-directional Rx/Tx and an Rx/Tx repeater with electrical drop. The series is based on hot-swappable SFP modules that provide easy product maintenance and flexibility when multiple wavelengths are needed (as for CWDM).
1.2 Features
Convenient 3gbps/HD/SD and MADI stand alo ne fiber inter f a ces
Supports any serial data rate from 19.4 Mbps (ATSC) to 2.97Gbps
(3G SDI)
Re-clocked serial digital video from 270Mbps to 2.97Gbps
Provides unidirectional or bi-directional interface between serial
digital and fiber optics
Single or Dual Tx, Single or Dual Rx or combined Rx/Tx configurations
Supports Multiple wavelength from the standard 1310 nm, 1550 nm to multiple CWDM wavelengths
Well integrated WDM (1310/1550) solution for dual Tx, Dual Rx and Rx/Tx cards
Ideal for long video run with “Hum” immunity
Presence/loss of signal alarm
Optical Power level out-of-range warning (receiver only)
The SFP modules are fully hot swappable.
Operation from 5 Volts DC.
GUIDE TO INSTALLATION AND OPERATION
2 | FIO-991p
1.3 Product Overview
Figure 1 illustrates the FIO-991p's major parts and their locations. The SFP module is inserted into the socket on the end of the FIO-991p chassis, and the fiber is plugged into the SFP module. The 3G/HD/SD digital video inputs and outputs appear on BNC c onne ctor s at the opposit e en d of the chas sis. Input status and SFP module status are provided by the status LEDs. Finally, the power source is connected to the lockable power connector.
Figure 1: Overall view of the FIO-991p
1.4 Produc t Variants
The FIO-991p is available in eight different versions, based on the I/O configuration. They are distinguished by the model designation on the label. Within each version, some variations in functionality may be available by selecting the SFP module.
Fiber SFP module
Power connector
I/O BNCs
Status LEDs
GUIDE TO INSTALLATION AND OPERATION
FIO-991p | 3
FIO-991p-R-LC
Single optical receiver, double 3G/HD/SD SDI output
FIO-991p-RR-LC
Dual optical receivers, dual 3G/HD/SD SDI outputs
FIO-991p-RR-LC (Dual Rx)
FIO-991p-R-LC (Single Rx)
Optical
Rx
Optical
Rx
FIBER Rx A
FIBER Rx B
3G/HD/SD SDI OUT A
3G/HD/SD SDI OUT B
Optical
Rx
FIBER Rx
3G/HD/SD SDI OUT 1
3G/HD/SD SDI OUT 2
Loading...
+ 14 hidden pages