All other brand names, product names or trademarks belong to their respective holders.
Usage Agreement
Please read the following terms and conditions carefully. By using the Intuition XG
Installation & Quick Start Guide, you agree to the following terms and conditions:
Miranda Technologies Inc. hereby grants permission and license to owners of Intuition XG
and Vertigo Suite to use their product manuals for their own internal business use. Manuals
for Miranda Technologies Inc. products may not be reproduced or transmitted in any form
or by any means, electronic or mechanical, including photocopying and recording, for any
purpose unless specifically authorized in writing by Miranda Technologies Inc.
Miranda Technologies Inc. makes no warranty, either expressed or implied, including but
not limited to any implied warranties of merchantability or fitness for a particular purpose,
regarding these materials and makes such materials available solely on an “As-Is” basis.
In no event shall Miranda Technologies Inc. be liable to anyone for special, collateral,
incidental, or consequential damages in connection with or arising out of purchase or use
of these materials. The sole and exclusive liability to Miranda Technologies Inc., regardless
of the form of action, shall not exceed the purchase price of the materials described herein.
Miranda Technologies Inc. reserves the right to revise and improve its products at any time
and without notice. This publication describes the state of this product at the time of its
publication, and may not reflect the product at all times in the future. Thus, different versions
of a manual may exist for any given product. Care should be taken to ensure that one
obtains the proper manual version for a specific product serial number.
Information in this document is subject to change without notice and does not represent a
commitment on the part of Miranda Technologies Inc.
Government Use
The Software {and Documentation} is provided with RESTRICTED RIGHTS. Use,
duplication or disclosure by the United States Government or any agency, department or
instrumentality thereof is subject to the restrictions set forth in the Commercial Computer
Software -- Restricted Rights clause at FAR 52.227-19 or the Commercial Computer
Software -- Licensing clause at NASA FAR Supplement 1852.227-86.
This equipment complies with the requirements of the following standards for
Safety of Information Technology Equipment:
• CSA C22.2 no. 60950-1-07 (2nd Edition)
• UL 60950-1 (2
• IEC/EN 60950-1 (2
nd
Edition)
nd
Edition)
Warning:An appropriately listed/certified main supply power cord must be used for the
connection of the equipment to the main voltage at either 120V
~
or 240V
~
CAUTION:These servicing instructions are for use by qualified service personnel only.
To reduce the risk of electric shock, do not perform any servicing than that
contained in the operating instructions unless you are qualified to do so. Refer all
servicing to qualified service personnel. Servicing should be done in a static-free
environment.
Electromagnetic Compatibility
This equipment has been tested for verification of compliance with FCC Part 15,
Subpart B requirements for Class A digital devices.
NOTE
This equipment has been tested and found to comply with the limits for a Class
A digital device, pursuant to Part 15 of the FCC rules. These limits are designed
to provide reasonable protection against harmful interference when the
equipment is operated in a commercial environment. This equipment
generates, uses and radiates radio frequency energy, and, if not installed and
used in accordance with the instruction manual, may cause harmful
interference in which case the user will be required to correct the interference
at his own expense.
This equipment has been tested and complies with the requirements of the
directive 2004/108/CE :
• EN 55022 Class A Radiated emissions
• EN 55022 Class A Conducted emissions
• EN 61000 -3-2 Harmonic current emission limits
• EN 61000 -3-3 Volatge fluctation and flicker limitations
• EN 61000 -4-2 Electrostatic discharge immunity
• EN 61000 -4-3 Radiated EMF immunity-RF
• EN 61000 -4-4 Electrical fast transient immunity
• EN 61000 -4-5 Surge immunity
• EN 61000 -4-8 Power frequency magnetic field
• EN 61000 -4-11 Voltage dips, short interruption and voltage variation immunity
• ENV 50204 Radiated EMF immunity - 900MHz pulsed
WARNING
Vertigo XG devices contain Class 1 lasers, which are deemed safe under normal
operating conditions.
Standalone Equipment - Laser source(s) employed:
CLASS 1 LASER PRODUCT
APPAREIL A LASER DE CLASSE 1
This guide provides basic Intuition XG product information and an orientation of the
hardware components for all three (3) models of the Intuition XG (XG-e, XG-3U-e and XGDual-e). This guides also provides instructions for performing a first-time installation of the
Intuition XG devices, as well as initial setup tasks to get the devices up and running.
New Intuition XG devices are factory configured for standard rendering and playout
workflows. Configuring the Intuition XG settings for advanced workflows is normally
performed by qualified network administrators or Miranda’s Integration Specialists using the
Intuition XG Portal and Dashboard software interfaces. Information and instructions for
implementing advanced configurations is beyond the scope of this document, but are
covered in the “Intuition XG Configuration Guide”
.
Intuition XG Installation & Quick Start Guide1-1
Introduction
Intuition XG product description
The Intuition XG graphics co-processor significantly extends the graphics and clip playout
capabilities of master control switcher systems, like the Imagestore 750 or NV51000MC, by
feeding the HD/SD fill/key inputs. It’s ideal for playout of the most advanced data-driven,
channel branding and promotional graphics, including: “Coming up next” and episodic
promos. The Intuition XG provides multi-level character generation plus animation/still and
clip playout with multi-channel audio.
The Intuition XG is available in three (3) standard models:
Intuition-XG-eA single channel graphics co-processor, generally used
upstream of a master control switcher like the Imagestore 750
or NV5100MC.
Video In A
•1RU chassis with a single power supply unit.
•1 HD/SD video input, 1 HD/SD (Fill & Key) output
•A powerful, HD/SD character generator which allows the
playout of virtually unlimited layers of animated text and
dynamically updated text.
•1 TB RAID1 storage for up to 200 hours of video/audio
clips and simultaneous playout of multiple clips
•Playout of up to eight (8) layers of animated and still
graphics templates for the most advanced branding and
promotional effects.
•SD output as NTSC or PAL
•HD output as 1080i, 720p or 480p
•VANC + VBI extraction processing and insertion or
VAnc/VBI pass through.
•Full automation control by serial, Ethernet and/or GPI
commands.
Fill
Key
Out A
Options
•VX-ClipPlayer
•VX-Audio-e
1-2Intuition XG Installation & Quick Start Guide
Intuition-XG-3U-eA single channel graphics co-processor, generally used
upstream of a master control switcher like the Imagestore 750
or NV5100MC.
Introduction
Video In A
Fill
Key
Out A
•3RU chassis with redundant power supply unit.
•1 HD/SD video input, 1 HD/SD (Fill & Key) output
•A powerful, HD/SD character generator which allows the
playout of virtually unlimited layers of animated text and
dynamically updated text.
•1 TB RAID1 storage for up to 400 hours of video/audio
clips and simultaneous playout of multiple clips
•Playout of up to eight (8) layers of animated and still
graphics templates for the most advanced branding and
promotional effects.
•SD output as NTSC or PAL
•HD output as 1080i, 720p or 480p
•VANC + VBI extraction processing and insertion or
VAnc/VBI pass through.
•16 embedded audio channels
•Discrete AES audio channels - up to 8 in and 16 out
•Full automation control by serial, Ethernet and/or GPI
commands.
Options
•VX-ClipPlayer
•VX-Audio-e
•VX-EAS
•VX-GPI-8-eVX-RS422-2-e
•VX-TC-e
•VX-2TB-UPG
Intuition XG Installation & Quick Start Guide 1-3
Introduction
Intuition-XG-Dual-eA dual channel graphics co-processor, generally used
upstream of a master control switcher like the Imagestore 750
or NV5100MC.
Fill
Out A
Video In A
Video In B
Key
Fill
Key
Out B
•3RU chassis with redundant power supply unit.
•2 HD/SD video input, 2 HD/SD (Fill & Key) output
•A powerful, HD/SD character generator which allows the
playout of virtually unlimited layers of animated text and
dynamically updated text.
•1 TB RAID1 storage for up to 400 hours of video/audio
clips and simultaneous playout of multiple clips
•Playout of up to eight (8) layers of animated and still
graphics templates for the most advanced branding and
promotional effects.
•SD output as NTSC or PAL
•HD output as 1080i, 720p or 480p
•VANC + VBI extraction processing and insertion or
VAnc/VBI pass through.
•16 embedded audio channels per SDI stream
•Discrete AES audio channels - up to 8 in and 2 x 16 out
•Full automation control by serial, Ethernet and/or GPI
commands.
Options
•VX-ClipPlayer
•VX-Audio-e
•VX-EAS
•VX-GPI-8-eVX-RS422-2-e
•VX-TC-e
•VX-2TB-UPG
1-4Intuition XG Installation & Quick Start Guide
The following options are available on Intuition XG devices:
VX-ClipPlayerClip Player
The Clip Player is an internal codec package for playing out multi-format
video clips.
VX-Audio-eAudio Processing
The discrete audio I/O card allows the Intuition XG to capture, process and
output discrete audio. The number of discrete audio I/O channels depends
on the model of Intuition XG:
•Intuition-XG-e => None
•Intuition-XG-3Ue and Intuition-XG-Dual-e => 8 in / 16 out
VX-GPI-8-eGPI card
The GPI card allows for control of the Intuition XG via GPI triggers. The
card allows for up to 8 GPI in and 8 GPI out.
VX-EASEAS Text Integration (EAS Plugin and EAS Software Panel)
Introduction
High quality EAS text and audio can be played out with the Intuition XG
processor, using templates which integrate channel branding graphics for
a consistent on-air presentation.
Only available for the Intuition-XG-3U-e and Intuition-Dual-e models.
VX-RS422-2-e2 port RS-422 card
The RS-422 card provides an interface upon which the Intuition XG can
communicate with automation systems.
Only available for the Intuition-XG-3U-e and Intuition-Dual-e models.
VX-TC-eTime Code card
The Time Code card allows you to lock the Intuition XG’s system clock to
an external timecode.
Only available for the Intuition-XG-3U-e and Intuition-Dual-e models.
VX-2TB-UPG1 TB RAID-10 Expansion option (2 x 1TB)
Increases the usable storage from 1TB to 2TB.
Only available for the Intuition-XG-3U-e and Intuition-Dual-e models.
Intuition XG Installation & Quick Start Guide 1-5
Introduction
Overview of the Intuition XG-e chassis
The Intuition XG-e is a single HD/SD channel playout server (1 HD/SD video input, 1 HDSDI Fill + Key output) that incorporates the Intuition XG graphics engine to rendering
advanced graphics. Physically, the Intuition XG is a 1RU rackmount playout server with a
single power supply unit and 1 TB of storage.
The following table summarizes the Intuition XG-e’s physical dimensions and power
consumption:
ChassisFORM: 1U rackmount chassis
EIGHT: 1.7” (43 mm)
H
W
IDTH: 17.2” (437 mm)
D
EPTH: 28.2” (716 mm)
Power consumption1 x 1400W power supply
AC input: 180 - 240V, 50 - 60 Hz, 7.2 - 9.5 Amp
The following sections provide more information about Intuition XG-e hardware
components:
•“Front panel components (Intuition XG-e)” on page 1-7
•“Rear panel components (Intuition XG-e)” on page 1-7
1-6Intuition XG Installation & Quick Start Guide
Front panel components (Intuition XG-e)
The Intuition XG’s front panel provides convenient access to the SATA hard drives, two USB
ports, a CD/DVD ROM drive, two fans, and a control panel containing five LEDs and two
buttons for system monitoring and operation. Figure 1-1
connectors on the front panel of the Intuition XG-e.
identifies the LEDs, buttons and
Introduction
2
Info. LEDbuttonbutton
RS-232 Serial Port
(Disabled)
CD/DVD ROM Drive
SATA Hard Drives
Power Supply Unit
USB 2.0
Connectors (2)
Figure 1-1. Front panel components of the Intuition XG-e
NOTE
See the “Intuition XG Configuration Guide” for descriptions of each of the LEDs and buttons
on the front panel of the Intuition XG-e.
Rear panel components (Intuition XG-e)
1
ResetPower On/OffPower L EDHDD LEDNIC 2 LEDNIC 1 LEDUniversal
Control Panel
LEDs & Buttons
The Intuition XG’s rear panel provides convenient access to the video card’s I/O connector,
which provides 1 SD/HD SDI video input, 1 SD/HD SDI video output (Fill & Key), and a
reference signal input. The rear panel also provides access to the graphics card connector,
as well as various I/O ports (RS-232, USB, Ethernet...etc.). Figure 1-4
identifies each
connector on the rear panel of the Intuition XG chassis.
SDI Video Card I/O Connector
USB 2.0 Connectors (2)
(Mouse & Keyboard)
IPMI Connector
(Not used)
Network Ethernet
Connectors (2)
VGA Connector
Serial RS-232 Port
(Disabled)
Graphics Card Connectors (2)
(Only one connector used)
A/C Power Input
Figure 1-2. The rear panel components of the Intuition XG-e
Intuition XG Installation & Quick Start Guide 1-7
Introduction
Overview of the Intuition XG-3U/Dual chassis
The Intuition XG unit is a 3RU rackmount rendering platform that incorporates redundant fans,
three power supplies, and 1 TB RAID1-enabled storage (optional 2 TB RAID10 expansion).
The only visible difference between the 3RU models of the Intuition XG is that the single
channel model (XG-3U-e) has only one (1) discrete AES audio connector, while the dual
channel model (XG-Dual-e) has two (2) discrete AES audio connectors.
In some cases, the positioning of the connectors on the Intuition XG’s rear panel differs
depending upon the hardware options installed. See page 1-6
hardware options.
for a list of the Intuition XG’s
The following table summarizes the Intuition XG’s physical dimensions and power consumption:
ChassisFORM: 3U rackmount chassis
HEIGHT: 5.2” (132 mm)
W
IDTH: 17.7” (450 mm)
DEPTH: 25.5” (648 mm)
Power consumptionAC input: 100 - 240V, 50 - 60 Hz
Consumption: 4.05 - 1.73A
Power: 410 max.
TemperatureAmbient temperature: 35 C
Note: This shall be the maximum internal
temperature within the rack in which the
Vertigo XG unit is installed.
Consult the following sections to familiarize yourself with the Intuition XG’s front and rear
panel components:
•“Front panel components (Intuition XG-3U/Dual)” on page 1-9
•“Rear panel components (Intuition XG-3U/Dual)” on page 1-10
°
1-8Intuition XG Installation & Quick Start Guide
Loading...
+ 36 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.