MIRAI DTL-632E500 User Manual
User's Manual
32” LCD TV
Table of Contents
Important Safety Instructions..............................................................................02
Cautions .............................................................................................................03
Descriptions and accessories.............................................................................06
LCD TV installation & operation
Connectors and sockets.....................................................................................07
Control panel keys..............................................................................................11
Remote control functions....................................................................................12
z Teletext .................................................................................................13
English
TV menu
Using the advanced menu..................................................................................14
z Display ..................................................................................................15
z Advance.................................................................................................16
z Geometry...............................................................................................17
z TV Setup................................................................................................18
z Program Edit..........................................................................................19
z Audio .....................................................................................................21
z System...................................................................................................22
Other information
Trouble-shooting.................................................................................................23
Specifications .....................................................................................................24
S0524
Important Safety Instructions
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7. Do not block any ventilation openings. Install in accordance with the manufacturer's instructions.
8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus
(including amplifiers) that produce heat.
9. Protect the power cord from being walked on or pinched particularly at plugs, convenience
receptacles, and the point where they exit from the apparatus.
10. Only use attachments/accessories specified by the manufacturer.
11. Use only with the cart, stand, tripod, bracket, or table specified by the
manufacturer, or sold with the apparatus. When a cart is used, use caution when
moving the cart/ apparatus combination to avoid injury from tip-over.
12. Unplug this apparatus during lightning storms or when unused for long periods of
time.
13. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has
been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled
or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture,
does not operate normally, or has been dropped.
14. Apparatus shall not be exposed to dripping or splashing and no objects fill with liquids, such as
vases, shall be placed on the apparatus.
15. To reduce the risk of electric shock, do not remove the cover of the apparatus. Refer any servicing
to appointed service personnel.
16. The readily operable appliance coupler will serve as the disconnecting device of this apparatus.
17. The apparatus must be connected to a mains socket outlet with a protected earthed connection.
18. Maintain a minimum of 10cm free space around the apparatus for proper ventilation.
19. Used or discharged batteries must be properly disposed of or recycled in compliance with all
applicable laws. For detailed information, contact your local solid waste disposal authority.
20. When purchased or used in different countries, use an appropriate power cable which is compliant
with local laws and regulations.
21. To pr
event injury, this apparatus must be securely attached to the floor/wall in accordance with the
installation instructions
22. Do not install this equipment in a confined space such a book case or similar unit.
23. No naked flame sources, such as lighted candles,should be placed on the apparatus.
installation instructions.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
WARNING: TO REDUCE THE RISK OF FIRE OR
ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT
TO RAIN OR MOISTURE.
This symbol is used to indicate uninsulated "dangerous voltage" within the product's
enclosure that may cause electric shock.
The exclamation point within an equilateral triangle is intended to alert the user to the
important operating and maintenance (servicing) instructions in the literature
accompanying the appliance.
"CAUTION"
These servicing instructions are for use by qualified service personnel only. To reduce the risk of
electric shock do not perform any servicing other than that contained in the operating instructions
unless you are qualified to do so.
2 ..................................................................................................................................................................
Cautions
[Caution]
To protect your device from electrical damage, be sure to plug the cord into socket securely.
[Caution]
If you use the LCD TV with video games, computers, or similar products, keep brightness
and contrast at a low level. Images with high level brightness or contrast may "burn on" the
screen permanently.
[Tips for cleaning the LCD TV]
1. Wipe the LCD TV with soft or dry cloth.
2. DO NOT use solvent or methyl benzene. Harsh chemicals may damage your LCD TV.
3. Make sure the LCD TV is unplugged before you clean it.
[CATV]
Be sure to acquire due authorization from the broadcaster/CATV service provider/program owner
before using the TV receiver to watch programs through UHF, VHF, or CATV.
[Installation and use of LCD TV]
1. Check the LCD TV power specification shown on the serial no./model tag. Be sure to use the
power according to the specification. If you are unsure about the power requirement, please
contact your distributor or local power company.
2. Make sure to plug into the poser cable into the socket securely. If you have problems plugging in,
please contact your distributor.
3. DO NOT overload power sockets or extension cords. Overloading poses a risk of electric shock or
fire.
4. DO NOT place any objects on the power cord. Keep your LCD TV away from any place that might
cause damage to the LCD TV. Use only the correct power cord.
5. Switch off your LCD TV when it is not in use If the LCD TV will not be in use for a long time,
unplug it to prevent the risk of fire.
6. The vent on the rear of the LCD TV is designed for ventilation and heat dissipation. Keep the vent
clear.
7. DO NOT place the LCD TV on beds, sofas, or carpet, as this may block the vent.
8. DO NOT place the LCD TV in enclosed spaces, such as a on a bookshelf or in a TV cabinet as
this may block the vent.
9. Keep the LCD TV away from high-temperature or heat-generating objects.
10. Keep the LCD TV away from direct sunlight.
11. DO NOT place the LCD TV on an unstable shelf or desk. Failing to do so may result in injury.
12. DO NOT allow foreign objects inside the LCD TV, as this poses a risk of electric shock or damage
to the internal components.
13. When transporting the LCD TV, do not carry it by holding onto the speakers. Be sure to always
carry the TV with two people holding it with both hands.
14. DO NOT place the Power Adapter on bed, sofa, or carpet, otherwise the vent may be blocked and
will not work properly.
15. This equipment is for entertainment use only.
16.The device is not intended for use at visual display work places acc. BildscharbV.
............................................................................................................................................................. 03
Cautions
[Maintenance]
If any of following occurs, unplug the LCD TV and contact your distributor or appointed technician to
repair the LCD TV:
1. The power cord or plug is damaged.
2. Liquid enters the LCD TV.
3. LCD TV is damp or wet.
4. LCD TV is damaged.
5. LCD TV malfunctions.
DO NOT attempt to repair the LCD TV by yourself. There are high voltages inside the cabinet
which poses a risk of electric shock.
Changing parts
If the LCD TV requires new parts, ask for written proof of these required parts from the appointed
technician.
Safety inspection
After the LCD TV is repaired, remember to ask the technician to conduct a routine safety inspection
(based on the manufacturer’s requirements) to make sure the LCD TV is safe.
If the LCD TV has been used longer than its life, please contact qualified technician for repair.
[User's record]
You can find the serial no. and model tag on the back of the LCD TV. Do provide the serial no. when
you contacting the distributor or appointed service personnel.
Please read and comply with all warnings and instructions in the manual . Failing to do so may
void the warranty. Modifying the LCD TV in any unauthorised manner will void the warranty
immediately.
FCC Compliance Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions:
(1) this device may not cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception which can be determined by turning the equipment off and on the user is
encouraged to try to correct the interference by one or more of the following measures:
* Reorient or relocate the receiving antenna
* Increase the separation between the equipment and receiver
* Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected
Caution: To comply with the limits for an FCC Class B computing device, always use the signal cord
and power cord supplied with this unit. The Federal Communications Commission warns that changes
or modifications to the unit not expressly approved by the party responsible for compliance could void
the user's authority to operate the equipment.
European Notice
Products with the CE Marking comply with both the EMC Directive (89/336/EEC), (93/68/EEC) and
the Low Voltage Directive (73/23/EEC) issued by the Commission of the European Community.
4 ..................................................................................................................................................................
Cautions
■ Only use attachments/accessories specified by
the manufacturer.
■ Never modifiy arbitrarily any polarized or
grounding plugs designed for safety.If the plug
does not match your outlet, please contact the
electrical technician to replace your old outlet
with the one having new specification.
■ DO NOT place any objects on the power cord.
Keep your LCD TV away from any place that
might cause damage to the LCD TV. Use only
the correct power cord.
■ DO NOT overload power sockets or extension
cords. Overloading poses a risk of electric shock
or fire.
■ The device shall be installed away from the
surroundings with dripping or splashing water,
and no water-filling objects (e.g. vases) shall be
placed on the device.
............................................................................................................................................................... 5
r
Descriptions and accessories
LCD Panel
Speakers
1.Remote control 2.AAA battery X 2 3.User manual
Wall Mount Hole
Power Connecto
Support Hole：
Before operation, the auxiliary screw should be installed
on the stationary table. (Fig. 1)
For the safety, if TV could not be installed on the
stationary table, please fastens TV using two screws
through pulling thread between rear wall mounted holes
and wall additionally. (Fig. 2)
SCREW SIZE:T4x12
4.Power cord (USA, England or Europe) X1
For Europe:A VDE certified power supply cord
has to be used with this equipment for
Germany. The power cord rated 250V, 10A
minimum, according to IEC 60227, H05VV-F
or VW-1, 0.75 mm2 x 3G should be used.
Control panel
Power LED
IR Remote receiver
Video & Antenna
Connectors
PC & Video
Connectors
Support Hole
Installation of batteries
1. Insert two AAA batteries into the Remote control.
Make sure + and - are facing the proper direction.
2. Replace the cover.
If the remote control will not to be used for a long time, remove the batteries.
Use the remote control carefully. Do not drop the remote control on the floor.
Keep it away from moisture, direct sunlight, and high temperatures.
6 ..................................................................................................................................................................
LCD TV installation
AV and Antenna input Connection
Connectors and sockets
Port Functions
Scart 1
A connector for Europe, which uses the same connector to transmit AV,
SRGB, SV and Audio input signals; TV and Audio out signals.
A connector for Europe, which uses the same connector to transmit AV,
Scart 2
Tuner Input
AV R/L Audio
Output
............................................................................................................................................................... 7
SRGB and Audio input signals; by main screen(TV, AV, Scart1/AV/SV) and
Audio out signals.
Connects to TV RF signals (antenna/CATV).
Connect via audio cable for audio output.
LCD TV installation
Connectors and sockets
PC & Video Input Connection
Port Functions
The YPbPr video signal can be used if connecting through the component
Component Video
and R/L Audio input
VGA Input (analog)
and Audio input
HDMI Input (digital)
※ Support timing refer to spec table
video port. For example Progressive Scan DVD payers, Hi-scale HDTV
Decoders, and satellite receivers, obtain video with maximum resolution
using YPbPr and R/L audio signals.
Connect to VGA analog signals sources (※). PC audio supports 3.5mm
Jack.
High Definition Multimedia Interface
Connect to devices with digitals signals and can be used with PC or HDTV
video signals(※).
8 ..................................................................................................................................................................
Loading...