Mirage B1016 Service manual

~D~~~

COMMUNICATIONS EQUIPMENT. INC.

81016

2 METERPOWER

AMPLIFIER

III

P.O.BOX1000 . MORGANHill, CA95037 . (408)771

4/84

The MIRAGE B1016 represents the latest in 2 Meter
Power Amplifiers. It incorporates features that make it the
most useful and versatile amplifier available today. The
B1016 has a built-in receive preamp, variable SSB delay,
remote keying and complete remote control when using the
optional RC-1, Remote Head. It will amplify both FM and
SSBsignals. It has built-in thermal protection to prevent over
heating.

SPECIFICATIONS:

FREQUENCYRANGE". 144to 148 MHz

POWER.. INPUT 1-15 Watts (18 Watts max.)

MODES ...

RECEIVE PREAMP

DC POWER ." .
FUSE
IMPEDANCE.
SIZE

WEIGHT ..

INSTAllATION:

OUTPUT 160 Watts or more for

10 Watts input intermit-
tent duty cycle

FM, SSB and CW

10 db gain with 2:t .5 db
noise figure

13.6 VDC at 20-25 Amps nominal
35 Amps (internally mounted)

. . 50 Ohm input and output

12" X 3" X 51/2"

5 lBS.

The B1016 may be mounted by using the brackets sup-
plied. The B1016 must have adequate ventilation around the
heat sink. Use of #8 or larger wire to connect the B1016
to the battery is recommended. Use good quality 50 Ohm

co-ax, between the radio and the B1016. RG-8U or the