Miracle Business LT10B, LT15H-EU, LT17H-RU, MT109 User Manual

Table of Content

1. Precautions

2. Package Content

3. Installation and connection

4. Driver installing and uninstalling

Serial port model driver installing

USB port model driver installing

Uninstalling driver

Remark

5. Control panel setup

Open control panel

Setting guide

6. Calibration

7. Troubleshooting

8. Working environment

1. Precautions

•

Touch screen is made of glass, its breakable from dropping or impact, please handle it

with care.

•

Please do not plug-in and plug-out frequently when the computer is on.

•

Please clean the front and rear surface of touch screen before operation to get best

performance.

2. Package contents

•

Touch screen

•

PC connection cables (USB or serial cable, depending on the model you chose)

Touchscreen

Connector

0

ADB针头

DB9孔头DB9孔 头ADB孔头

Serial cable

USB cable

3. Installing and connecting

There are pre-set mounting holes in rear side of touch screen, that customers can

mount the touch screen on monitor with, and then connect it to PC with cable.

Serial cable connecting

1． Connect DB9 female connector to COM port of PC.

2． Connect ADB male connector to ps2 port of PC.

触摸屏

键盘口

串口

串口数据线

接键盘

接直键盘口

1

3． Connect ADB female connector to keyboard.

4． Connect 9 pin connector to 9 pin socket of main control board.

USB cable connecting

Connect USB port of touch screen and USB port of PC with USB cable.

4. Driver installing and uninstalling

(1) Serial port model driver installing

Installation: Double-click on MiracleTouchSerial.exe, the following dialogue

box will show up:

Select the installation folder and confirm:

Please make sure the old version driver has been uninstalled, then select “YES” to start

installation

The equipment selection interface will show up after selecting “YES”

Select “Infrared Touch Screen 2K” in the dialog box from whatsoever items are shown there,

2