MIRABELLA I002867 Quick Start Guide

1

| P a g e

Quick Start Guide

Mirabella Bebe Full HD Wi-Fi Pan & Tilt Baby

Camera

Model: I002867

2

| P a g e

What’s included

Speed 9S

Bracket

Power

Adaptor

screw sets

Product Details

3

| P a g e

Install the APP and register Account

Download the "Mirabella Genio" APP to your smartphone from App Store or
Google Play, or you can also scan the QR code below, the APP icon will be
displayed after installed successfully

Insert the Micro SD card (not included) this is optional and the camera will
work without it. Insert the Micro SD card gently into the SD card slot. Please
pay careful attention to the orientation of the Micro SD card.
Micro SD card size needs >8GB and can support up to Max of 128GB, FAT32
format only. Does not support NTFS file system.

4

| P a g e

1. Camera Installation

Use the included mounting bracket to fix the camera to a clean surface

Or put the camera on a flat surface

2. Pairing the camera using Mirabella Genio App

1. Connect the supplied 5V 2A adaptor to the camera and turn on the
power switch

2. Wait for 6-10 seconds, status light will begin to blink RED fast and then
camera will be in the pairing mode and is ready to pair.

5

| P a g e

3. Please ensure your mobile phone is connected to your 2.4Ghz Wi-Fi
network (the baby cam is not compatible on 5GHz Wi-Fi network)

4. Launch Mirabella Genio APP, tap on +, then choose Security & Sensor ,
select your camera from the list of smart devices icon

5. Ensure the LED indicator light is blinking red fast, tap next step and
enter your 2.4GHz Wi-Fi name and password

6

| P a g e

6. Tap continue and QR code will appear, face this QR code in front of the
camera approximate 15-20cm, until your hear a “dongdongdong”
sound,