Mira L11 Installation & User Manual

MIra L11
Shower FIttInGS

Installation & User Guide

These instructions are to be left with the user

1

ConTenTs

Introduction .............................................................................................3

Specications ..........................................................................................3

Pressures: ............................................................................................3

Flow Rates: ..........................................................................................3

Installation ...............................................................................................4

General .................................................................................................4

Install the Shower Fittings ....................................................................4

User Maintenance ....................................................................................6

Cleaning ...............................................................................................6

spare Parts ..............................................................................................7

Customer service ....................................................................Back Page

If you experience any difculty with the installation or operation of your new Shower

Fittings, please refer to ‘Fault Diagnosis’, before contacting Kohler Mira Ltd. Our

telephone and fax numbers can be found on the back cover of this guide.

2

InTroDUCTIon

0

5

10

15

20

25

0 0.5 1.0 1.5

Pressure (Bar)

Flow Rate (l/min)

Inner & Outer
Outer
Inner

2.0

Thank you for purchasing a quality Mira product. To enjoy the full potential of your
new product, please take time to read this guide thoroughly, having done so, keep
it handy for future reference.

Mira L11 Shower Fittings are precision engineered to give a satisfactory shower
over a range of pressures. The ttings are suitable for pressures between 1.0 and

5.0 bar.

This product comprises of an adjustable spray handset with three different spray
actions and is supplied complete with exible hose, adjustable clamp bracket
assembly, slide bar, hose retainer and supports. Suitable for connection to both
surface mounted and built-in shower controls.

sPeCIFICaTIons

Pressures:

Minimum maintained pressure: 1 bar (100 kPa).

Maximum maintained pressure: 5.0 bar (500 kPa).

Warning! Exceeding the stated maximum maintained pressure could result in

excessive spray forces and possible damage to the handset.

Flow rates:

3