Trademarks
The Bluetooth word mark and logo are owned by the Bluetooth SIG, Inc. All other
brand and product names are trademarks or registered trademarks of their
respective companies.
Note
Information in this manual is subject to change without notice.
Table of Contents
Warnings and Notices.............................................................................v
About Charging .................................................................................. 85
About the AC Adapter ........................................................................ 85
About the Battery ............................................................................... 86
iv
Warnings and Notices
For your safety, do not operate the controls of the product while driving.
Use this product with caution. The product is a navigation aid. It does not
provide exact measurements of direction, distance, location or topography.
The calculated route is for reference only. Always follow the posted traffic
signs, speed limits and road restrictions.
When you leave your car, do not leave your device on the dashboard in direct
sunlight. This can cause the battery to overheat and malfunction.
The Global Positioning System (GPS) is operated by the United States
government, which is solely responsible for its performance. Any change to
the GPS system can affect the accuracy of all GPS equipment world-wide.
GPS satellite signals cannot typically pass through solid materials (except
glass). GPS location information is not typically available inside buildings,
tunnels, or underground parking lots.
A minimum of 4 GPS satellite signals is needed to calculate your GPS
position. Signal reception can be affected by weather events or overhead
obstacles (e.g. dense foliage and tall buildings).
Other wireless devices in the vehicle may interfere with the reception of
satellite signals and cause the reception to be unstable.
v
A device holder is needed when using the device in a car. Be sure to place the
device in an appropriate place, so as not to obstruct the driver’s view, or
deployment of airbags.
Do not mount where the driver’s
field of vision is blocked.
Do not place on the
dashboard unsecured.
Do not mount in front of
airbag panels.
Do not mount in front of an
airbag field of deployment.
vi
1 Getting Started
1.1 Understanding Hardware Components
NOTE: Depending upon the specific model purchased, the color of your device may not
exactly match the device shown in this manual.
Front and Side Components
Ref Component Description
Charge Indicator
Bluetooth
Indicator
Touch Screen with
Glows in bright amber to indicate that the battery is
charging, and turns green when the battery is fully
Flashes in blue to indicate that Bluetooth is on.
Displays the output of your device. Tap the screen
your fingertip t
information.
o select menu commands or enter
charged.
1
Power Button Turns on and off the device.
Menu Button Displays the Home screen.
Volume Control Adjusts the volume level of your device.
Back Components
Ref Component Description
External Antenna This connector (under rubber dust cover) allows use of an
Connector
Speaker Sends out music, sounds and voice.
Hand String Hole Hand string attaches to this hole.
optional external GPS antenna with magnetic mount,
which may be positioned on top of th
signal reception in areas with poor re
e car for bet
ception.
ter GPS
2
Top Components
Ref Component Description
GPS antenna Receives signals from the GPS satellites overhead. Make sure
n
SD/MMC Slot Accepts a SD (Secure Digital) or MMC (MultiMediaCard)
o
that it has a clear view of the sky.
card for accessing data such as MP3 music.
Bottom Components
Ref Component Description
Reset Button Restarts your device (soft reset).
n
TMC/Headphone
o
Connector
Mini-USB Connector Connects to the AC adapter or USB cable.
p
ON/OFF Switch The main power/battery cutoff switch.
q
Connects to stereo headphones or the TMC (Traffic
Message Channel) antenna for receiving TMC
information.
3
1.2
1.
Performing the Initial Start Up
Using a pointed pen, slide the ON/OFF switch to the ON position.
CAUTION:
2. Your device turns on. Imour
device as described in the next section.
3.
The “Change Language” screen appears. Tap the left/right arrow button to
select the desired language. Then, tap the
Always leave the ON/OFF switch in the ON position for normal operation.
mediately connect the AC adapter to charge y
button.
4. The “Date&Tim
the time zone, date, and tim
e” screen appears. Tap the appropriate arrow button to select
e. Then, tap the
button.
4
5. The Home screen appears. You can now use your device.
5
1.3
Connecting to AC Power and Charging the
Battery
When charging the battery for the very first time, you should charge
8 hours.
1.
Slide and click the AC converter onto the AC adapter.
2.
Connect the adapter cable to the bottom of your device.
3.
Plug the AC adapter into a wall outlet.
he charge indicator glows amber when charging is in progress. Do not
4. T
onnect your device
discfrom AC power until the battery is fully charged,
w
hen the charge indicator turns green. Charging may take a few hours.
it for at least
NO
TE:
Do not immediately turn on your device after connecting the AC adapter to charge a
power-depleted battery. Wait for at least one minute.
Depending on your region of purchase, the AC converter may not look exactly the same
as the picture shown.
Your device can also be charged when it is connected to a desktop computer via the USB
cable.
CAUTION: For optimal performance of the lithium battery:
Do not charge the battery where the temperature is high (e.g. in direct sunlight).
There is no need to fully discharge the battery before charging. You can charge the battery
before it is discharged.
When storing the product for a long period of time, be sure to fully charge the battery at
least once every two weeks. Over discharge of the battery can affect the charging
performance.
6
1.4 Using Your Device in a Vehicle
A device holder and car charger are supplied
w
ith your device.
Using the Device Holder
Use the device holder to mou
in a vehicle. Make sure that the GPS antenna
has a clear view of the sky. (See the
docum
ent supplied with the device holder for
the in
sta
llation instruction.)
NOTE:
Depending upon the specific model purchased, the device holder supplied with your
device may not look exactly the same as the picture shown.
tive coating, an external antenna (optional) may If the car’s windshield is tinted with a reflec
be needed to route the antenna to the top of the car through a window.
Con
necting the Car Charger
e when you are usin
Th car charger supplies power to your device
car.
CAUTION: To protect your device against sudden
only after the car engine has started.
Connect one end of the car charger to th
1. e
power connector of your device.
nt your device
surges in current, connect the car charger
g the device in a
To Cigarette Lighter
Connect the other end to the 12-volt
2.
cigarette light
and charge your device. The indicator
light on the car charger lights in green to
indicate that power is being supplied to
your device.
er or power port to power
7
1.5 Operating Basics
Turning On and Off
Use the power button ( ) to turn on and off your
device.
When you press the power button to turn off the unit,
your device enters a suspend state and the system stops
operating. When you turn on the system, it resumes.
Operating the Device
To operate your device, touch the screen with your fingertip. You can perform the
following actions:
Tap
Touch the screen once with your fingertip
to open items or select onscreen buttons or
options.
Drag
Hold your fingertip on the screen and drag
up/down/left/right or across the screen.
Tap and hold
Tap and hold your fingertip until an action
is complete, or a result or menu is shown.
8
Home Screen
The first time you initialize your device, the Home screen appears. The Home
screen is your starting place for various tasks. Tap a button to start a task or open
another menu.
You can access the Home screen at any time by pressing the Menu (
on the side of your device.
Ref
Button
Name
Contacts Keeps a list of names, addresses, and phone
Mio Map Starts the navigation software. See the manual
MP3 Plays MP3 music. Chapter 4
Photos Displays pictures (.jpg, .gif, and .bmp formats).Chapter 5
Settings Customizes the system settings. Chapter 6
Description
For Detailed
Information
supplied with
) button
Chapter 2
Chapter 3
the software.
9
Inserting a SD/MMC Card
Your device has a SD/MMC slot where you can
insert an optional Secure Digital or
MultiMediaCard storage card.
To use a card, insert it into the slot, with the
connector pointing to the slot and its label
facing the front of the device.
To remove a card, first make sure that no
application is accessing the card, then slightly
push the top edge of the card to release it and
pull it out of the slot.
NOTE:
Make sure that no foreign objects enter the slot.
Keep a SD or MMC card in a well-protected box to avoid dust and humidity when you are
not using it.
10
2 Contacts
2.1 Starting and Exiting Contacts
Contacts allows you to keep a list of names, addresses, and phone numbers.
NOTE: If you have created Microsoft Outlook Contacts information on your computer, you
can copy the information to your device. (See Chapter 9 for information.)
Tap the
appears.
Contacts button on the Home screen to start the program. The contacts list
To exit the program, tap
11
.
2.2 Using the Contacts List
A
After starting Contacts, the contacts lit appears. It shows the names and phone
numbers (mobile phone numbers by default) of your contacts.
You can use the various buttons on the screen to search a contact, navigate to the
address of a contact, call a contact, and so on.
Tap one of the alphabet sets to
quickly find a contact.
Navigate to the address of
the selected contact.
Tap twice to display
the summary screen
of a contact.
Tap to scroll through the list.
Call the selected contact.
dd a contact.
Delete the selected contact.
Exit the program.
2.3 Using the Summary Screen
In the contact list, tapping a contact twice displays the summary screen of the
contact.
Back
Tap to scroll through the
entry fields.
12
2.4 Navigating to a Contact’s Address
You can set a contact’s address as your GPS navigation destination.
1. Tap the
2. In the contact list, select the desired contact and tap
3. Tap
Contacts button on the Home screen to start the program.
to select the home address or to select the work address.
.
4. The navigation program starts. (See the document supplied with the
navigation software for more information.)
13
2.5 Making a Phone Call to a Contact
NOTE: A mobile phone supporting Bluetooth® connection is required.
1. Tap the Contacts button on the Home screen to start the program.
2. In the contact list, select the desired contact and tap
3. Tap
the mobile phone number.
to call the home number, the work number, or
.
4. The Dialer program starts. (See Chapter 7 for more information.)
14
2.6 Managing Contacts
Adding a Contact
1. Tap the Contacts button on the Home screen to start the program.
2. Tap
3. Tap an entry field twice
.
. The soft keyboard appears.
4. Use the soft keyboard to enter the information in the field and tap
OK.
15
Tap the soft keyboard to
r
enter text and numbers.
Switch between uppe
and lower cases.
Enable/disable accent
marks (umlauts).
Switch to numeric keys.
5. Enter the information in other fields such as address and phone number fields.
You will need to scroll down to see all available fields.
6. Tap
save the contact’s information and return to the contact list.
16
Editing a Contact
To modify a contact’s information:
1. In the contact list, tap the contact twice to open the summary screen.
2. Tap twice the field you want to edit and use the soft keyboard to edit.
3. Tap to save the changes.
Deleting a Contact
In the contact list, select the contact you want to delete and tap .
17
3 Calculator
3.1 Starting and Exiting Calculator
Calculator provides three modes: Calculator, Currency, and Conversion. You
can use these modes to perform basic
measure conversion functions.
arithmetic, currency conversion, and
Tap the
You will see the calculator screen. To switch to another mode, tap one of the
buttons at the top right corner of the screen.
Calculator button on the Home screen to start the program.
Switch to
Calculator mode.
Switch to Currency
mode.
Switch to Conversion
mode.
Exit
19
To exit the program, tap
r
s
.
3.2 Using the Calculator Mode
The Calculator mode allows you to perform any of the standard operations for
which you would normally use a handheld calculator.
If you are currently not in the Calculator mode, tap the
Tap the numeric keypad to enter numbers and mathematical symbols. Then tap
the
button to generate the result.
button.
Calculator Memory
Memory indicato
Memory button
20
Button Name Description
Memory Cancel Clears the value in memory.
Memory Recall Shows the value in memory.
Memory Plus Adds the current value to the value in memory.
Memory Minus Subtracts the current value from the value in memory.
3.3 Using the Currency Mode
Use the Currency mode to perform the currency conversion. You can also edit the
exchange rate.
1. Start the Calculator program as described in section 3.1.
2. Tap
to switch to the Currency mode.
3. Tap the down arrow next to the input field to display a list of currencies and
select the currency to convert from. When a currency is selected, the
abbreviation of the currency will be displayed on the upper left corner of the
input field.
21
Loading...
+ 65 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.