r
r
r
r
y
r
Quick Start Guide
Congratulations on purchasing the Pocket PC. This Quick Start Guide helps you
through a successful setup of your Pocket PC and familiarizes you with the basic
skills of using your Pocket PC.
NOTE: Depending on the model you purchased, the cabinet color may be different from the
color shown in this guide.
Step 1. Identify Components
Notification Indicato
Charge Indicato
Touch Screen
Program
Buttons (4)
Microphone
SD/MMC Card Slot
IR Port
Camera Lens
Speaker
Navigation Button
Stylus
Flash
Reset
Button
Batter
Finger
Grip
Lanyard Eyelet
Power Button
Record Button
Battery
ActiveSync Connecto
Power Connecto
Headphone
Connecto
Lock
Step 2. Perform the Initial Startup
Initial startup includes installing the battery, setting the backup battery switch and
completing the Welcome Wizard.
1. Slide the battery lock to the unlock (
().
2. Insert the battery into the battery compartment ().
3. The backup battery switch should be set to the ON
(right) position for normal operation. Pull out the
stylus and use it to slide the battery switch to the ON
(right) position.
CAUTION: Always leave the backup battery switch in the ON
position for normal operation. Changing the switch will cause
your data to be lost.
4. Replace the battery door and slide the battery lock to
the lock (
) position.
) position () and open the battery door
5. The red notification indicator on your Pocket PC will flash for approximately
30 seconds. Then your Pocket PC will automatically turn on and display the
“Welcome” screen.
6. To begin the “Welcome” Wizard, tap the screen with the stylus and follow the
onscreen instructions to complete the wizard. The wizard presents a brief
orientation to Microsoft® Windows® for Pocket PC, helps you align the touch
screen and prompts you to select your city and time zone.
Step 3. Charge the Battery
Fully charge the battery before starting to use your Pocket PC for the first time.
1. Plug the converter to the AC adapter.
2. Connect to AC power. You can connect either with or without the cradle.
With the cradle
Slide your Pocket PC into the cradle.
Connect the appropriate end of
the AC adapter to the power
connector on the cradle cable.
Plug the other end of the AC
adapter into a wall outlet.
Charge
Indicator
Converter
Without the cradle
Connect the appropriate end of the
AC adapter to the power connector
on the bottom of your Pocket PC
and the other end into a wall outlet.
Charge
Indicator
Converter
3. The charge indicator glows amber when charging is in progress. Do not
disconnect your Pocket PC from AC power until the battery is fully charged, as
indicated by the amber indicator turning into green. This will take a couple of
hours.
NOTE: It is recommended that you keep charging for at least 24 hours when charging your
Pocket PC for the first time. This ensures the backup battery in a fully-charged state.
Whenever possible, keep your Pocket PC connected to the AC adapter and a power
source. Doing so keeps the battery charged.
Step 4. Install Microsoft ActiveSync
You can use Microsoft ActiveSync® technology to synchronize information on
your desktop computer and/or a Microsoft Exchange Server with the information
on your Pocket PC with the information on the desktop computer and/or the server
and updates all locations, keeping you up-to-date with the most recent information.
ActiveSync is already installed on your Pocket PC. You need to install ActiveSync
on your desktop computer. Follow the procedure below:
CAUTION:
Before installation, make sure that you have Microsoft Outlook installed on your desktop
computer. If you do not have Outlook or your version of Outlook is earlier than the version
provided on the Companion CD, install Outlook from the Companion CD.
Do not connect your Pocket PC to your desktop computer before ActiveSync is installed.
During the New Partnership setup, select “Synchronize with this desktop computer.” Do not
select “Synchronize with Microsoft Mobile Information Server and/or this desktop computer”
unless you are sure that your company is running Microsoft Mobile Information Server 2002
1. Turn on your desktop computer.
or later. Contact your network administrator or ISP for detailed information.
2. Insert the Companion CD into the CD-ROM drive of your desktop computer.
3. Click the arrow on the first screen to enter the main screen and click
4. In the “Start Here” screen, click
Install ActiveSync 3.7
5. In the “Install ActiveSync 3.7” screen, click
6. In the “File Download” screen, click on
Windows XP or click
Run this program from its current location
Open
Install
on the left column.
to start installation.
if your operating system is
if your operating
Start Here
system is Windows 2000/Me/98.
7. Follow the onscreen instructions to install
Desktop computer
ActiveSync.
8. When prompted, connect your Pocket PC to
your desktop computer. Slide your Pocket
PC into the cradle. Connect the cradle cable
to a USB port on your desktop computer.
.
9. The “Add New Hardware Wizard” should automatically install the USB driver.
(If you need to specify the location of the driver, click
CD-ROM drive containing the Companion CD.)
10. Follow the onscreen instructions to establish a partnership and synchronize
your Pocket PC with your desktop computer.
After your first synchronization, the data you have stored on your desktop
computer such as Calendar, Contacts and Tasks is copied to your Pocket PC. You
are now ready to take it along with you when you go.
Browse
and select the
Get Familiar with Your Pocket PC
Stylus
Use the stylus to navigate and select objects on the
screen. Touch the screen once with the stylus to open
items and select options.
Today Screen
When you turn on your Pocket PC for the first time
each day (or after 4 hours of inactivity), you will see
the Today screen. On the Today screen, you can see
at a glance important information for the day.
Start Menu
Tap
can select a program to open, customize your Pocket PC or get help.
at the upper left corner of the screen to pop up the Start menu where you
Command Bar
Use the Command bar at the bottom of the screen to perform tasks in programs. The
Command bar includes menu names, buttons and the Input panel button.
Where to Find Information
For information on See this source
Detailed operating information User’s Manual
Programs on your Pocket PC User’s Manual or Pocket PC online Help
Additional programs that can be
installed on your Pocket PC
Connecting to and synchronizing
with a desktop computer
Troubleshooting User’s Manual
Last-minute updates and detailed
technical information
The latest on Windows Powered
Pocket PCs
Companion CD or other CD(s) supplied with
your Pocket PC
User’s Manual or ActiveSync Help on your
desktop computer
The Read Me files in the “Microsoft
ActiveSync” folder on your desktop computer
or the Companion CD
The Microsoft Mobile Devices Web site:
www.pocketpc.com
Microsoft, Windows, the Windows logo, Windows Media, Outlook and ActiveSync are registered trademarks or
trademarks of Microsoft Corporation in the United States and/or other countries. Microsoft products are licensed
to OEMs by Microsoft Licensing, Inc., a wholly owned subsidiary of Microsoft Corporation.
Loading...