Mio 215 HC User Manual
Cyclo
™
215 Series
User Manual
2
Welcome
Thank you for purchasing this Mio. Please read this manual carefully before
using your Mio for the first time. Keep this manual in a safe place and use as
your first point of reference.
Important information for using the manual
It is important to understand the terms and typographical conventions used in
this manual.
Bold — Components or items displayed on screen, including buttons, headings,
field names and options.
Italics — Indicates the name of a screen.
Disclaimer
Not all models are available in all regions.
Depending on the specific model purchased, the colour and look of your device
and accessories may not exactly match the graphics shown in this document.
Mio operates a policy of ongoing development. Mio reserves the right to make
changes and improvements to any of the products described in this document
without prior notice. Mio does not warrant that this document is error-free.
The screenshots and other presentations shown in this manual may differ
from the actual screens and presentations generated by the actual product.
All such differences are minor and the actual product will deliver the described
functionality as presented in this User Manual in all material respects.
Copyright
© MiTAC Digital Technology Corporation. Mio is either a registered trademark
or trademark of MiTAC Digital Technology Corporation and is used under
licence by Mio Technology Limited. All rights reserved.
All other trademarks and registrations are the property of their respective
owners.
ANT+™ is a trademark of Dynastream Innovations Inc. or its subsidiaries.
Revision: R00
(10/2018)
Contents
Welcome ......................................................................................................................2
Knowing your device ..................................................................................................4
Accessories ............................................................................................................4
Getting started ...........................................................................................................5
Charging the battery ...........................................................................................5
Performing the initial start-up ...........................................................................5
Connecting your device to the computer ........................................................5
Installing the device ...................................................................................................6
Mounting the device on your bike ....................................................................6
Installing the sensors on your bike ...................................................................6
Putting on the heart rate monitor .................................................................... 7
Operating basics .........................................................................................................8
Using the POWER button ...................................................................................8
Using the touch screen .......................................................................................9
Main menu ............................................................................................................9
Keyboard screen .................................................................................................10
Viewing Dashboard screens ................................................................................... 11
Starting navigation ..................................................................................................12
Using the Navigate wizard ...............................................................................12
Navigating to Home ..........................................................................................12
Finding the location by Address ......................................................................13
Searching for a POI ............................................................................................13
Tracks ...................................................................................................................13
Searching for a location from the map screen ..............................................13
Searching for a location using GPS coordinates ...........................................14
Other navigating options .................................................................................14
Surprise Me™ ............................................................................................................ 15
Viewing the History ................................................................................................. 15
Viewing the summary of recorded data ........................................................15
3
Managing data on the device .................................................................................16
CycloAgent™ ......................................................................................................16
Customising your device .........................................................................................16
Profiles .................................................................................................................16
Routing ................................................................................................................. 17
Dashboard ...........................................................................................................17
Sensors .................................................................................................................17
Where Am I .........................................................................................................18
Manage ................................................................................................................18
Maps .....................................................................................................................18
System .................................................................................................................18
Product Info ........................................................................................................19
For more information ............................................................................................. 20
Online support .................................................................................................. 20
Caring for your Mio ........................................................................................... 20
Resetting the device ......................................................................................... 20
Troubleshooting ................................................................................................20
What is GPS? ..................................................................................................... 20
IPX5.......................................................................................................................21
Safety precautions .............................................................................................21
Regulatory information ....................................................................................21
End user license agreement .............................................................................22
4
Knowing your device
❶
Status indicator
• Glows in amber: battery charging.
• Glows in green: battery full.
• Flashes in green: when the
backlight is turned off.
❷
POWER button
Turns your device on and off.❸Touch screen
• Displays the output of your device.
• Tap the screen with your finger to
select menu commands or enter
information.
❹
Memory card slot
This function is reserved for
debugging purposes only.❺Micro-USB connector
Connects the USB cable.
❻
Bike mount socket
For the device mount.
Accessories
Your device comes with the following accessories. To use your device on a bike,
ensure you use the specific bike mount kit that came with your device. Mio may
provide optional accessories for specific models. Please visit Mio website
(www.mio.com) for information.
• USB cable
• Bike mount kit
• Heart rate belt* (ANT+™ sensor)
• Speed and cadence sensor kit* (ANT+™ sensor)
*May be sold separately and used for Cyclo 215 HC only
Note: Depending on the specific model purchased, the colour and look of your device and
accessories may not exactly match the graphics shown in this document.
Note: This device is ANT+ certified. Visit www.thisisant.com/directory for a list of
compatible products and apps.
5
Getting started
Charging the battery
Your device has an internal battery that may not be fully charged when you
purchase it. You should charge the battery for at least 8 hours before you start
using it for the very first time.
To charge the battery, use the supplied USB cable to connect the device to a
computer, USB charger or power adapter.
CAUTION:
For optimal performance of the lithium battery, note the following:
• Do not charge the battery where the temperature is high (e.g. in direct sunlight).
• Failure to follow the battery usage instructions could cause damage to your device,
battery and even bodily injury or property damage and will void the warranty.
• When storing the product for a long period of time, charge the battery to 50% –
80% capacity to prevent excess discharge.
Performing the initial start-up
1. Mount the device and accessories on to your bike. For more information, see
the “Installing the device” section.
2. Press and hold the POWER button for 3 seconds to turn your device on.
3 SEC
3. Follow the prompts to personalise your device, including:
• Select your preferred language.
• Set the date and time.
• Set the units format.
• Create your user profile.
Note: You can change these settings while using the device by tapping Main menu >
Settings.
4. Activate the map.
Enter the Startup Key (which is printed on the bottom of the box) and then
tap OK to unlock your device. You will only have to do this the first time you
use the device.
5. Once your device is turned on, it will search for satellite signals
automatically. This may take several seconds depending on the location.
When GPS is fixed, the GPS signal icon ( ) on the screen indicates the
GPS status.
Note: Depending on your device model, it will also automatically scan and pair the
accessories (for heart rate monitor and cadence/speed sensor only) with the device.
You can also scan the accessories manually while using the device by tapping Main
menu > Settings > Sensors.
Connecting your device to the computer
1. Turn on the computer.
2. Turn on your device.
3. Connect the Micro-USB end of the USB cable to the back of your device and
the other end to a USB port on your computer.
4. Select the desired connection type from the pop-up message window:
• Connect to PC: Your device will be recognised as two external mass-
storage drives: Mio_system and Mio_data. You can use Windows File
Explorer to copy/move the files from the computer to your device. A USB
Connection screen appears to prevent you from using your device.
DO NOT delete any files that are pre-installed on the device. Deleting
the files can cause the device to crash. Mio is not responsible for product
quality caused by file deletion.
• Charge only: You will be able to continue using your device with the
battery in charging mode via the computer.
6
Installing the device
Mounting the device on your bike
The bike mount kit includes two types of rubber pads, allowing you to attach
the bike mount to your bike securely.
1. Select the rubber pad that best fits the handle bars on your bike and then
attach it using the two plastic straps.
2. Align the latch on the back of the device with the slot on the bike mount,
and then rotate the device clockwise to lock the device to the bike mount.
You can choose to mount the device on the handlebar (a) or on the stem (b).
See the following figure for the examples of mounting the device.
3. To remove the device from the bike mount, rotate it counter-clockwise.
Installing the sensors on your bike
1. Follow the instruction below to install the cadence/speed sensor kit on your
bike.
7
a
c
b
d
2. Ensure that the magnets are aligned with the sensing area on the sensors.
3. When done, you can manually pair the sensor with your device by tapping
Main menu > Settings > Sensors > Cadence/Speed.
The cadence sensor contains a replaceable CR2032 battery. Follow the
instructions below to replace the battery:
1. Locate the battery cover on the back of the sensor, and then twist the cover
anticlockwise (e.g. by using a coin) to remove the cover and battery.
2. Insert the new battery into the battery chamber and replace the cover.
3. Twist the cover clockwise (e.g. by using a coin) to close the cover.
Putting on the heart rate monitor
Note: Please note the heart rate monitor is not a medical device and its readings are not
a substitute for obtaining measurements that require medical precision. It is strongly
recommended to consult a doctor if you have a pacemaker or other implemented devices
before using the heart rate monitor.
1. Before using the heart rate monitor, wet the contacts on the back of the
chest strap.
Note: If possible, you can also use an electrolyte gel (usually available in local sports
stores) to ensure good contact.
2. Adjust the elastic strap so it’s snug while you are putting it on. Ensure that
you can take a good deep breath after putting on the strap.
3. Follow the instructions below to wrap the strap around your back, and then
secure it on the other side with the buckle.
Putting on the heart rate monitor is like wearing a belt around your lower
chest.
8
4. When done, you can manually pair the monitor with your device by tapping
Main menu > Settings > Sensors > Heart rate.
The heart rate monitor contains a replaceable CR2032 battery. Follow the
instructions below to replace the battery:
1. Locate the battery cover on the back of the monitor, and then twist the
cover anticlockwise (e.g. by using a coin) to remove the cover and battery.
2. Insert the new battery into the battery chamber and replace the cover.
3. Twist the cover clockwise (e.g. by using a coin) to close the cover.
Operating basics
Using the POWER button
• Turning on the device
Press and hold the POWER button for 3 seconds to turn on your device.
3 SEC
• Turning off the backlight
You can set the device to turn off the backlight automatically to reduce
the battery consumption: Main menu > Settings > System > Screen >
Backlight Timer.
Resume using the device to
turn on the backlight.
• Turning off the device
Press and hold the POWER button for 3 seconds to pop up the Power Off/
Cancel screen. Choose Power Off to turn off the device or Cancel to
continue operating the device.
3 SEC
Note: Press and hold the POWER button for 5 seconds to power off the device if it is
not responding.
Your device will automatically turn off after 10 minutes (by default) of
inactivity.
The Power Off/Cancel screen
will pop up and the device will be
turned off if you do not make a selection.
Loading...