Mio 210 User Manual
User Manual
Cyclo
™
210
Welcome
Contents
Thank you for purchasing this Mio. Please read this manual carefully before
using your Mio for the first time. Keep this manual in a safe place and use as
your first point of reference.
Important information for using the manual
It is important to understand the terms and typographical conventions used in
this manual.
Bold — Components or items displayed on screen, including buttons, headings,
field names and options.
Italics — Indicates the name of a screen.
Disclaimer
Not all models are available in all regions.
Depending on the specific model purchased, the colour and look of your device
and accessories may not exactly match the graphics shown in this document.
Mio operates a policy of ongoing development. Mio reserves the right to make
changes and improvements to any of the products described in this document
without prior notice. Mio does not warrant that this document is error-free.
The screenshots and other presentations shown in this manual may differ
from the actual screens and presentations generated by the actual product.
All such differences are minor and the actual product will deliver the described
functionality as presented in this User Manual in all material respects.
Copyright
© MiTAC Digital Technology Corporation. Mio is either a registered trademark
or trademark of MiTAC Digital Technology Corporation and is used under
licence by Mio Technology Limited. All rights reserved.
All other trademarks and registrations are the property of their respective
owners.
Revision: R00
(4/2018)
Welcome ......................................................................................................................2
Knowing your device ..................................................................................................4
Accessories ............................................................................................................4
Getting started ...........................................................................................................4
Charging the battery ...........................................................................................4
Performing the initial start-up ...........................................................................4
Connecting your device to the computer ........................................................5
Installing the device ................................................................................................... 5
Mounting the device on your bike ....................................................................5
Operating basics .........................................................................................................6
Using the POWER button ...................................................................................6
Using the touch screen .......................................................................................7
Main menu ............................................................................................................7
Keyboard screen ...................................................................................................8
Viewing Dashboard screens .....................................................................................9
Starting navigation ..................................................................................................10
Using the Navigate wizard ...............................................................................10
Navigating to Home ..........................................................................................10
Finding the location by Address ......................................................................11
Searching for a POI ............................................................................................11
Tracks ...................................................................................................................11
Searching for a location from the map screen .............................................. 11
Searching for a location using GPS coordinates ...........................................12
Other navigating options .................................................................................12
Surprise Me™ ............................................................................................................13
Viewing the History .................................................................................................13
Viewing the summary of recorded data ........................................................13
Managing data on the device .................................................................................14
2
CycloAgent™ ......................................................................................................14
Customising your device .........................................................................................14
Profiles .................................................................................................................14
Routing .................................................................................................................15
Dashboard ...........................................................................................................15
Where Am I .........................................................................................................15
Manage ................................................................................................................16
Maps .....................................................................................................................16
System .................................................................................................................16
Product Info ........................................................................................................17
For more information ..............................................................................................18
Online support ...................................................................................................18
Caring for your Mio ............................................................................................18
Resetting the device ..........................................................................................18
Troubleshooting .................................................................................................18
What is GPS? ......................................................................................................18
IPX5.......................................................................................................................19
Safety precautions .............................................................................................19
Regulatory information ....................................................................................19
End user license agreement ............................................................................20
3
Knowing your device
Status indicator
❶
• Glows in amber: battery charging.
• Glows in green: battery full.
• Flashes in green: when the
backlight is turned off.
POWER button
❷
Turns your device on and off.
Touch screen
❸
• Displays the output of your device.
• Tap the screen with your finger to
select menu commands or enter
information.
Memory card slot
❹
This function is reserved for
debugging purposes only.
Micro-USB connector
❺
Connects the USB cable.
Bike mount socket
❻
For the device mount.
Accessories
Your device comes with the following accessories. To use your device on a bike,
ensure you use the specific bike mount kit that came with your device. Mio may
provide optional accessories for specific models. Please visit Mio website
(www.mio.com) for information.
• USB cable
• Bike mount kit
Note: Depending on the specific model purchased, the colour and look of your device and
accessories may not exactly match the graphics shown in this document.
Getting started
Charging the battery
Your device has an internal battery that may not be fully charged when you
purchase it. You should charge the battery for at least 5 hours before you start
using it for the very first time.
To charge the battery, use the supplied USB cable to connect the device to a
computer, USB charger or power adapter.
CAUTION:
For optimal performance of the lithium battery, note the following:
• Do not charge the battery where the temperature is high (e.g. in direct sunlight).
• Failure to follow the battery usage instructions could cause damage to your device,
battery and even bodily injury or property damage and will void the warranty.
• When storing the product for a long period of time, charge the battery to 50% –
80% capacity to prevent excess discharge.
Performing the initial start-up
1. Mount the device and accessories on to your bike. For more information, see
the “Installing the device” section.
2. Press and hold the POWER button for 3 seconds to turn your device on.
3 SEC
3. Follow the prompts to personalise your device, including:
• Select your preferred language.
4
• Set the date and time.
• Set the units format.
• Create your user profile.
Note: You can change these settings while using the device by tapping Main menu >
Settings.
4. Activate the map.
Enter the Startup Key (which is printed on the bottom of the box) and then
tap OK to unlock your device. You will only have to do this the first time you
use the device.
5. Once your device is turned on, it will search for satellite signals
automatically. This may take several seconds depending on the location.
When GPS is fixed, the GPS signal icon (
GPS status.
) on the screen indicates the
Connecting your device to the computer
1. Turn on the computer.
2. Turn on your device.
3. Connect the Micro-USB end of the USB cable to the back of your device and
the other end to a USB port on your computer.
4. Select the desired connection type from the pop-up message window:
• Connect to PC: Your device will be recognised as two external mass-
storage drives: Mio_system and Mio_data. You can use Windows File
Explorer to copy/move the files from the computer to your device. A USB
Connection screen appears to prevent you from using your device.
DO NOT delete any files that are pre-installed on the device. Deleting
the files can cause the device to crash. Mio is not responsible for product
quality caused by file deletion.
• Charge only: You will be able to continue using your device with the
battery in charging mode via the computer.
Installing the device
Mounting the device on your bike
The bike mount kit includes two types of rubber pads, allowing you to attach
the bike mount to your bike securely.
1. Select the rubber pad that best fits the handle bars on your bike and then
attach it using the two plastic straps.
2. Align the latch on the back of the device with the slot on the bike mount,
and then rotate the device clockwise to lock the device to the bike mount.
You can choose to mount the device on the handlebar (a) or on the stem (b).
See the following figure for the examples of mounting the device.
5
3. To remove the device from the bike mount, rotate it counter-clockwise.
Operating basics
Using the POWER button
• Turning on the device
Press and hold the POWER button for 3 seconds to turn on your device.
3 SEC
• Turning off the backlight
You can set the device to turn off the backlight automatically to reduce
the battery consumption: Main menu > Settings > System > Screen >
Backlight Timer.
Resume using the device to
• Turning off the device
Press and hold the POWER button for 3 seconds to pop up the Power Off/
Cancel screen. Choose Power Off to turn off the device or Cancel to
continue operating the device.
turn on the backlight.
3 SEC
Note: Press and hold the POWER button for 5 seconds to power off the device if it is
not responding.
Your device will automatically turn off after 10 minutes (by default) of
inactivity.
turned off if you do not make a selection.
6
The Power Off/Cancel screen
will pop up and the device will be
Note: You can change the auto power off setting by tapping Main menu > Settings >
System > Screen > Auto Power Off Timer.
• Navigating through the screens
While the device is turned on and you are navigating through the menu
screens, press the POWER button briefly to return to the previous screen.
Using the touch screen
To operate your device, touch the screen with your finger. You can perform the
following actions:
• Tap
Quick touch the screen once to open menus or select onscreen button/
option.
• Drag
While navigating on the map, tap and hold on the screen without releasing
your finger to move the map to the desired position.
Unlocking the screen
Your device will automatically lock the screen after 30 seconds (by default) of
inactivity. When the screen is locked, press the POWER button briefly to unlock
the screen.
Note: You can change the screen lock setting by tapping Main menu > Settings > System
> Screen > Screen Lock Timer.
Main menu
The Main menu is your starting place for various tasks, providing quick access to
applications and settings. Tap a button to start a task or open another menu.
No. Description
❶
The Dashboard displays the view of functions, including the navigation and
training screens.
❷
Your trip/training can be saved in the history records. When your ride is finished,
you can check the history data such as date/time, distance, speed, altitude, etc.
❸
There are various customisation options available to enhance your riding
experience. You can customise the system settings, user profiles and more.
❹
Start to plan your route by selecting the locations, such as home, address, tracks,
POI, etc.
❺
Based on distance or time, the device will plan 3 routes for you to choose from.
❻
Tracks are the recorded routes that give the best experience for cycling provided
by other users and official institutes.
System icons
Various System icons on the title bar at the top of the screen provide the status
information of your device. Depending on your settings, the icons may be
different to provide various information of your device. Please note that these
icons will not be always displayed during your trip/training.
❶ ❷ ❸ ❹ ❺
No. Icon Description
❶
Time display Displays the current time.
The device will automatically set the correct time based on
the current GPS fixes.
7
Loading...