Mio Moov 200-Series, 300-Series | Important safety information
Important safety information
PLEASE READ CAREFULLY BEFORE INSTALLING PRODUCT IN VEHICLE
This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey
all safety messages that follow this sym bol to avoid possible injury or death.
WARNING indicates a potentially hazardous situation which, if not avoided, could result in
death or serious injury.
CAUTION indicates a potentially hazardous situation which, if not avoided, may result in minor
or moderate injury.
CAUTION used without the safety alert symbol indicates a potentially hazardous situation
which, if not avoided, may result in property damage.
Removing original equipment, adding accessories or modifying your vehicle co uld affect the vehicle ’s safety or make it ille gal to operate
in some jurisdictions.
Follow all product instructions and all instructions in your vehicle owner’s manual regarding accessories or modifications.
Consult your country’s and/or state’s laws regarding operation of a vehicle with any accessories or modifications.
It is your sole responsibility to place, secure and use your Mio in a manner that will not cause accidents, personal injury or property
damage. Always observe safe driving practices.
Do not mount your Mio in a way that may interfere with the safe operation of the vehicle, the deployment of air bags or other safety
equipment.
Do not operate your Mio while driving.
Before you use your Mio for the first time, familiarize yourself with your device and its operation.
On main roads, the distance to an exit calculated by the Mio may be further than the distance shown on road signs. Road signs show the
distance to the start of an exit while the Mio shows the distance to the next intersection, i.e., the end of the exit ramp or road. To prepare
to exit a road, always follow distance information on road signs.
The use of information regarding safety or speed camera locations may be subject to local laws in the country of use. You are
responsible for checking that you can legally use the information in your country or in the country where the information will be used.
Do not handle the Mio while it is hot. Let the product cool, out of direct sunlight.
At full power, prolonged listening to the Mio via headphones or earphones can damage the ear of the user.
Do not expose the Mio to direct sunlight in an unattended vehicle for prolonged periods. Overheating may damage the unit.
To discourage theft, do not leave your Mio, mounting bracket or any cables in plain view in an
unattended vehicle.
2
Mio Moov 200-Series, 300-Series | Important safety information
Home Charger-specific safety information
To charge your Mio from the mains power, use the home charger (Model: PSAA05R-050; Input: 100-240V AC 50-60Hz; Output: 5V DC
1A Max) supplied by Mio as an accessory (may be sold separately). Using other home chargers with your Mio could result in serious
injury or property damage.
Never use the charger if the plug or cord are damaged.
Do not expose the charger to moisture or water. Do not use the charger in a high moisture environment. Exposure to water may cause
electrical sparks or fires.
Never touch the charger when your hands or feet are wet.
Allow adequate ventilation around the charger when using it to operate your Mio or charge the Mio internal battery. Do not cover the
charger with paper or other objects that will reduce ventilation. Do not use the charger while it is inside a carrying case or
other container.
Ensure that the charger is connected to a power source with the correct fitting and voltage requirements. The voltage requirements can
be found on the home charger casing and/or packaging.
Do not attempt to service the charger as this could result in personal injury. Replace the charger if it is damaged or exposed to
excess moisture.
Internal battery-specific safety information
The Mio contains a non-replaceable internal lithium-ion polymer battery. The battery may burst or explode if mishandled, releasing
hazardous chemicals. To reduce the risk of fire or burns, do not disassemble, crush or puncture the battery.
Recycle or dispose of the battery safely and properly according to local laws and regulations. Do not dispose of the battery in
fire or water.
Only use the correct mains power charger (sold separately) or in-vehicle charger supplied by Mio to charge the Mio
internal battery.
Only use the Mio internal battery with the Mio unit.
The Mio battery will stop charging when the ambient temperature is less than 0ºC (32ºF) or more than 45ºC (113ºF).
Warning Notice to Drivers in California and Minnesota
State law prohibits drivers in California and Minnesota from mounting objects on their windshields while driving. Other Mio mounting
options are recommended and an alternative mounting option is included in this box. Mio does not take any responsibility for any fines,
penalties, or damages that may be incurred as a result of disregarding this notice. See California Vehicle Code Section 26708(a);
Minnesota Statutes 2005, Section 169.71.
Failure to adhere to these warnings and cautions may lead to death, serious injury or property damage. Mio disclaims all
liability for installation or use of the Mio that causes or contributes to death, injury or property damage or that violates any law.
3
Mio Moov 200-Series, 300-Series | Contents
Contents
Important safety information...................................................................................................................2
How does predictive text (abc, def…) work?...............................................................................83
Units ...............................................................................................................................................84
Units 1/2.....................................................................................................................................84
Units 2/2.....................................................................................................................................85
Point of Interest categories...........................................................................................................117
Traffic and other TMC Events.......................................................................................................119
For more information..........................................................................................................................122
15
6
Mio Moov 200-Series, 300-Series | Welcome
Welcome
Thank you for purchasing this Mio. This manual has been prepared to guide you through the operation of your Mio
from first set-up through to continuous use. Please read this manual carefully before using your Mio for the first time.
Keep this manual in a safe place and use as your first point of reference.
Important information for using the manual
It is important to understand the terms and typographical conventions used in this manual.
Formatting
The following formatting in the text identifies special information:
Convention Type of Information
Bold Mio components or items displayed on screen, including buttons, headings, field names and
Italics
Icons
The following icons are used throughout this manual:
Icon Description
Terms
The following terms are used throughout this manual to describe user actions.
Term Description
Tap Press and release an item displayed on the touch screen.
Tap and hold Tap and hold an item displayed on the touch screen for 2-3 seconds.
Select Tap an item in a list or tap a command from a menu.
options.
Indicates the name of a screen.
Case study
Warning
7
Mio Moov 200-Series, 300-Series | How do I get started?
How do I get started?
Note:
The first time you use your Mio, it may take upseveral minutes to establish a GPS connection. For more information about GPS, refer to
the GPS Frequently Asked Questionsguide on the enclosed DVD.
How do I turn my Mio on for the first time?
To get started for the first time, complete the following steps:
1. Read the Important Safety Information on page 3.
2. Position your Mio
Follow the instructions below to position your Mio in your vehicle:
Note: Ensure that your Mio does not obstruct the driver's view, or interfere with the operation of the vehicle airbags and
safety devices.
Mio Moov 200-Series
8
Mio Moov 200-Series, 300-Series | How do I get started?
9
Mio Moov 200-Series, 300-Series | How do I get started?
Mio Moov 300-Series
10
Mio Moov 200-Series, 300-Series | How do I get started?
3. Turn your Mio on
Push the Power switch to the ON position.
Your Mio will turn on and display the Language screen.
4.Select your preferred language
From the Select Language screen, tap your preferred language.
To prevent the Select Language screen from displaying on each start-up, clear the Show on start-up
check box.
You can change your preferred language while using your Mio (see "Language" on page 77).
5.Read the warning message
a) The Safety Agreement screen will display after you have selected your preferred language.
Read the Safety Agreement message.
b) To confirm that you have read and understood the message, tap Accept.
The Tutorial will display.
6.View the Tutorial
When you have accepted the Safety Agreement, the first Tutorial screen will display.
To prevent the Tutorial from displaying again on start-up, clear the Show on start-up check box.
To move forward through the Tutorial screens, tap
To view the previous screen, tap
.
.
To view the Tutorial again while using your Mio, see "Tutorial" on page 88.
Note: If you have maps installed from multiple continents, you may be prompted to select the maps you require.
To use maps from a different continent at a later time, you can select a different map via the Select Map screen in the
Select Map 3/3 preferences; refer to page 70.
When you have finished the Tutorial, the 3D Map screen will display. If you have a GPS fix, your current location will
be displayed on the map.
11
Mio Moov 200-Series, 300-Series | How do I get started?
How do I adjust the volume?
The volume on your Mio can be adjusted by the volume control on the Volume preference screen.
To mute the volume from the map screens, tap
To adjust the volume, tap and hold
to display the Volume preference screen.
and then tap .
For more information on how to adjust the volume on your Mio, see “Volume” on page 72.
12
Mio Moov 200-Series, 300-Series | How do I get started?
How do I monitor the battery status?
Your Mio has an internal battery that when fully charged, should provide power for up to 3 hours.
The battery indicator light on the top of the Mio indicates the level of internal battery charge:
Green - battery full
Orange - battery charging
You can monitor battery power status on the Power screen.
To access the Power screen, tap
and hold on the map screens.
How do I charge the battery?
The Battery Status bar displays External Power while the battery is charging; when the battery is fully charged, the
Battery Status bar will display at 100%.
To charge your Mio in a vehicle, plug the in-vehicle charger into
end into the vehicle power socket.
To charge your Mio using your computer, plug the large end of the USB cable directly into a USB port on your
computer (not a USB hub) and plug the small end into
ensure your Mio is turned off.
To charge your Mio using a mains power socket, plug the mains power charger cable into
the Mio and the mains power charger power pack into the power socket.
Note: The mains power charger is not included with all models and may be purchased separately.
on the bottom of your Mio and the other
on the bottom of your Mio. To begin charging,
on the bottom of
13
Mio Moov 200-Series, 300-Series | What are the main screens I will use?
What are the main screens I will use?
Main Menu
The Main Menu screen is your starting point for searching for a destination. The Main Menu screens also allow you
to customize preferences, receive updated traffic information and make and receive phone calls.
The Main Menu can be accessed from the map screens by tapping
bottom of any screen.
Note: The Main Menu screens may differ from those displayed above, depending on your Mio model.
screen
or by tapping the status bar at the
Map screens
There are five map screens used to view the route to your destination:
The Map screens can be accessed from the Main Menu screen by tapping
Map screen, or the map screen you were last viewing.
You can cycle through the different map screens by pressing
will display briefly as your cycle through).
on any map screen (the name of the map screen
. The Map button displays the 3D
For more information on the map screens, see "How do I view my route?" on page 34.
For information on using the Map menu from the 3D Map and 2D Map screens, see "How do I use the Map
Menu?" on page 44.
14
Mio Moov 200-Series, 300-Series | How do I navigate with GPS?
How do I navigate with GPS?
The Global Positioning System (GPS) is available at any time, free of charge, and is accurate to within 5m (15ft).
GPS navigation is made possible by a network of satelites that orbit the Earth at around 20,200km (12,552mi). Each
satelite transmits a range of signals which are utilized by GPS receivers, such as your Mio, to determine an exact
location. Although a GPS receiver can detect signals from up to 12 satelites at any time, only four signals are
required to provide a position or "GPS fix" (latitude and longitude), for vehicle navigation systems.
How does my Mio receive GPS signals?
Your Mio receives GPS signals via the internal GPS antenna. To guarantee the optimum GPS signal strength,
ensure your Mio is outdoors, or in a vehicle outdoors, and has an unobstructed view of the sky. GPS reception is not
usually affected by weather, however, very heavy rain or snow may have a negative effect on your reception.
How do I view my GPS status?
You can view your GPS status at any time from the map screens or the Viewfinder screen. displays green
when a GPS fix is established and red when a GPS fix is unavailable. To indicate the reception strength of a GPS fix,
displays between one and four green vertical bars.
To view your GPS status in more detail, see "GPS Status" on page 75.
To set your GPS mode, see “Setting your GPS mode” on page 76.
For more information about GPS, refer to the GPS Navigation - Frequently Asked Questions guide on the
MioMore Desktop DVD.
15
Mio Moov 200-Series, 300-Series | How do I go from A to B?
How do I go from A to B?
Your Mio is equipped with maps that provide street-level detail for door-to-door navigation, including Points of
Interest such as accommodation, parking areas, petrol stations, railway stations and airports.
When you ... Then ...
know the address of your destination use the address-entry wizard to enter the address
see "How do I search for an address?" on page 17.
want to make multiple stops use the Multi-stop Trip Planner screen to enter multiple waypoints
see "How do I create a trip with multiple stops?" on page 21.
need to find a named site, feature,
landmark or public venue
want to navigate to a NavPix™ location use the Go ToNavPix screen to navigate to a preinstalled NavPix
WARNING For your safety, enter destination information before you start a journey. Do not enter a destination while driving.
What if I miss a turn?
Back-On-Track™ Automatic Rerouting
You will be redirected if you make a wrong turn. A message informing you that your route is being re-calculated will
display at the top of the screen.
search for a Point of Interest
see "How do I search for a Point of Interest (POI)?" on page 26.
see "How do I navigate to a NavPix?" on page 54.
Note:NavPix is only available on some models.
To cancel a route re-calculation tap
. A warning will display, asking you to confirm the cancellation. If confirmed,
both the re-calculation and your current route will be cancelled.
16
Mio Moov 200-Series, 300-Series | How do I go from A to B?
How do I search for an address?
Enter a destination using the Destination Search, Keyboard and Preview screens, which used together form an
address-entry wizard.
This section provides a case study to help guide you through setting your destination.
Note: In some countries, you can search for your destination by postcode or zip code.
If you are in the United Kingdom, and you know the postcode of your destination, you can search for it from the Destination Search
screen by tapping Postcode, then entering a postcode of up to eight characters.
Quick Steps
1. Open the Destination Search screen
2. Select the country
3. Search for the city/area
4. Search for the street
5. Search for the house number
6. Tap
.
Case Study: How do I search for an address?
This case study will show you how to enter an address and how to navigate to it.
The address we will be using in this example is:
118 Mio Avenue
New York
New York 10017
USA.
Note: The above address is fictitious and used as an example only.
Tip: Before you enter your destination address, ensure that you have set your route preferences. For more information, see “Route
Options” on page 64.
1. Open the
The Destination Search screen will display.
Destination Search
screen
Note: If this is the first time you are setting your destination and you have maps from more than one country installed, then the
Select a map screen will display instead of the Destination Search screen. Go directly to step 2b.
The next time you perform this procedure, the Destination Search screen will open as expected.
17
Mio Moov 200-Series, 300-Series | How do I go from A to B?
2. Select the country
Note: If you only have the maps of one country installed and selected, that country is selected for your destination by default and cannot
be changed. Go to step 3.
a) From the Destination Search screen, tap .
The Select a map screen will display.
b) Select USA from the list.
The Destination Search screen will display.
3. Search for the City/Area
a) From the Destination Search screen, tap City/Area.
The Keyboard screen will display.
b) Use the Keyboard screen to search for New York as the city or area of your destination, then tap the
search result.
The Destination Search screen will display.
4. Search for the street name and house number
a) From the Destination Search screen, tap Street Address.
The Keyboard screen will display.
18
Mio Moov 200-Series, 300-Series | How do I go from A to B?
Using the
The Keyboard screen will display when you are required to enter text, such as when searching for a street name.
Search results will be listed in matching order, with the closest matches appearing at the top of the list. A maximum
of 99 results will display.
The Keyboard screen can display with various layouts depending on the information you need to enter, including
alphabet, number, alternate characters and combinations of these.
You can also choose the type of keyboard you prefer from alphabetic, QWERTY and keypad. For more information,
see “Keyboard” on page 83.
As you select each character, the first two results will display. Tap , then scroll to see more search results.
To select a character or a search result, tap the character or search result.
To delete a character, tap .
To display more characters, tap 123, alt or abc, if available.
Keyboard
screen
Using the
The Destination Search screen is used to select your destination by area, street, postal or ZIP code, Points of
Interest, intersection, city, area, state or country.
As you specify each part of the address, it will display at the top of the screen.
The available options will change to reflect the parts of the address still to be completed.
Destination Search
screen
19
Mio Moov 200-Series, 300-Series | How do I go from A to B?
b) Use the Keyboard screen to enter Mio Avenue as the street name of your destination, then tap the
search result.
Note: There may be multiple matches for a particular street name. Long streets that run through several neighbouring
areas, and common street names will produce search results ordered by their city or area name.
c) Use the Keyboard screen to enter 118 as the house number of your destination, then tap the search
result.
The Preview screen will display.
Note: If house numbers are available, but not the one that you require, you may have to choose the same street in a
neighbouring area. Press
If house numbers are not available for your selected section of the street the Preview screen will display.
and select another search result.
d) Complete one of the following:
If you want to ... Then ...
navigate to your selected
destinationn
tap
Your route is calculated; the 3D Map screen will display.
.
view the position on the map screen tap the map to display the position on the 2D Map screen.
view more information about your
destination
add the destination to a multi-stop
trip
tap More.
The Destination Details screen will display.
tap Add.
The Multi-stop Trip Planner screen will display. The address is
listed as a waypoint on the multi-stop trip. See “How do I create a
trip with multiple stops?” on page 21.
save the destination as My Home
tap Save.
The New Favorite screen will display.
tap Save as My Home.
save the destination as a favorite
tap Save.
The New Favorite screen will display.
tap Save as Favorite.
20
Mio Moov 200-Series, 300-Series | How do I go from A to B?
How do I create a trip with multiple stops?
You can use the Multi-stop Trip Planner screen to set multiple stops or waypoints for your trip. Your route will be
calculated to go via each of these points in the specified order.
Waypoints can be added via the Multi-stop Trip Planner screen or by selecting Location, then Add to Trip from the
pop-up Map menu on the 2D Map or 3D Map screen. You can save up to 198 multi-stop trips, each with up to 14
waypoints.
Note: Waypoints added, updated or deleted after a multi-stop trip has commenced will not affect the current route.
Quick Steps
1. Start your Multi-stop trip
2. Select the country
3. Search for the city/area
4. Search for the street and house number
5. Add additional waypoints
6. Tap
.
Case Study: How do I navigate to multiple addresses?
This case study will show you how to set a multi-stop trip by entering multiple waypoints.
The address we will be using in this example is:
Note: The below address is fictitious and used as an example only.
671 Mio Avenue
New York
New York 10036
USA.
Tip: Before you enter your destination address, ensure that you have set your route preferences. For more information, see “Route
Options” on page 64.
1. Open your
The Multi-stop Trip Planner screen will display.
Multi-stop Trip
screen
21
Mio Moov 200-Series, 300-Series | How do I go from A to B?
a) Tap Add.
The Add to Trip Menu will display.
b) Tap Address.
The Destination Search screen will open.
Note: You can also add waypoints using favorites, recent destinations, POI locations and NavPix.
2. Select the country
Note: If you only have the maps of one country installed and selected, that country is selected for your destination by default and cannot
be changed. Go to step 3.
a) From the Destination Search screen, tap .
The Select a map screen will display.
b) Select USA from the list.
The Destination Search screen will display.
3. Search for the City/Area
a) From the Destination Search screen, tap City/Area.
The Keyboard screen will display.
b) Use the Keyboard screen to search for New York as the city or area of your destination, then tap the
search result.
The Destination Search screen will display.
22
Mio Moov 200-Series, 300-Series | How do I go from A to B?
4. Search for the street name and house number
a) From the Destination Search screen, tap Street Address.
The Keyboard screen will display.
b) Use the Keyboard screen to enter Mio Avenue as the street name of your destination, then tap the
search result.
Note: There may be multiple matches for a particular street name. Long streets that run through several neighbouring
areas, and common street names will produce search results ordered by their city or area name.
c) Use the Keyboard screen to enter 671 as the house number of your destination.
The Preview screen will display.
Note: If house numbers are available, but not that you require, you may have to choose the same street in a neighbouring
area. If house numbers are not available for your selected section of the street the Destination Preview screen will display.
d) Tap Add.
The waypoint is automatically saved and the Multi-stop-Trip screen will display.
23
Mio Moov 200-Series, 300-Series | How do I go from A to B?
e) Complete one or more of the following:
If you want to ... Then ...
add another waypoint
Note: Waypoints added after a multi-stop
trip has commenced will not be included in
the current route.
navigate to your selected destination
tap Add.
The Add To Trip Menu will display.
return to step 1a.
tap
The Preview screen will display.
tap
The 3DMap screen will display the calculated route.
change the order of your waypoints
tap a destination point to move.
The Preview screen will display.
tap Up or Down.
The Multi-stop Trip Planner screen will redisplay.
delete all waypoints tap Clear.
delete one waypoint
tap a destination point to delete.
The Preview screen will display.
tap Delete.
The Multi-stop Trip Planner screen will redisplay.
save the multi-stop trip as a favorite
tap Save.
The New Favorite screen will display.
tap Save as Favorite.
The Favorite will be saved.
.
.
24
Mio Moov 200-Series, 300-Series | How do I go from A to B?
How do I skip a waypoint during a multi-stop trip?
To skip a waypoint during a multi-stop trip, complete the following:
1. Tap the map.
The Map Menu will display.
2. Tap Route, then Skip Waypoint.
The next waypoint will be skipped and the route recalculated to the following waypoint.
25
Mio Moov 200-Series, 300-Series | How do I go from A to B?
How do I search for a Point of Interest (POI)?
A POI is a named site, feature, landmark or public venue which can be displayed as an icon on the map. POIs are
grouped by type, such as petrol stations, parks, beache s and museums.
Select a POI using the Destination Search, Keyboard and Preview screens, which used together form a POI-entry
wizard.
Tip: You can also quickly search for certain POIs based upon your current location via the Main Menu screen.
This section provides a case study to help guide you through finding or setting your POI as a destination.
Quick Steps
1. Open the Destination Search screen
2. Select a country
3. Search for the City/Area
4. Search for a POI
5. Tap
This case study will show you how to enter an address and navigate to it.
The address used in this example is:
Note: The below address is fictitious and used as an example only.
Statue of Liberty
New York
New York 10004
USA
1. Open the
.
Case Study: How do I search for a Point of Interest?
Destination Search
screen
The Destination Search screen will display.
Note: If this is the first time you are setting your destination and you have maps from more than one country installed, then the
Select a map screen will display instead of the Destination Search screen. Go directly to step 2b.
The next time you perform this procedure, the Destination Search screen will open as expected.
26
Mio Moov 200-Series, 300-Series | How do I go from A to B?
2. Select the country
Note: If you only have the maps of one country installed and selected, that country is selected for your destination by default and cannot
be changed. Go to step 3.
a) From the Destination Search screen, tap .
The Select a map screen will display.
b) Select USA from the list.
The Destination Search screen will display.
3. Search for the city/area
a) From the Destination Search screen, tap City/Area.
The Keyboard screen will display.
b) Use the Keyboard screen to search for New York as the city or area of your destination, then tap the
search result.
The Select POI Category screen will display.
Tip: The list of categories is divided into Enabled Categories which are set to display an icon on the map screens, and Other POI
Categories which will not display an icon.
27
Mio Moov 200-Series, 300-Series | How do I go from A to B?
4. Search for a POI
a) Either tap Search by name to search in all POI categories, or select a category from the list.
The Keyboard screen will display.
b) Use the Keyboard screen to search for Statue of Liberty as your destination, then tap the search result.
The Preview screen will display.
c) Complete one of the following:
If you want to ... Then ...
navigate to your selected
destination
view your position on the map
tap
Your route is calculated and displayed on the 3D Map screen.
tap the map to display the position on the 2D Map screen..
screen
make a phone call to the POI tap Call.
Note: This feature is not available on all models.
view more information about your
destination
add the destination to a multi-stop
trip
tap More.
The Destination Details screen will display.
tap Add.
The Multi-stop Trip Planner screen will display. The address is
listed as a waypoint on the multi-stop trip. See “How do I create a
trip with multiple stops?” on page 21.
save the destination as My Home
tap Save.
tap Save as My Home.
save the destination as a Favorite
tap Save.
tap Save as Favorite.
.
The New Favorite screen will display.
The New Favorite screen will display.
28
Mio Moov 200-Series, 300-Series | How do I save Favorites and My Home?
How do I save Favorites and My Home?
You can save up to 200 destinations as favorites, one of which can be saved as My Home.
You can save a favorite from the Preview screen after searching for an address, or from the Map Menu on the 3D or
2D Map screens. For more information, see "How do I use the Map Menu?" on page 44.
Can I save a NavPix to a Favorite?
You can save a NavPix to any of your existing favorites. For more information, see "How do I save a NavPix to a
Favorite?" on page 55.
How do I save a Favorite or My Home?
1. Search for an address until the Preview screen is displayed.
2. Tap Save.
The New Favorite screen will display.
3. To change the name of the favorite, tap
.
The Keyboard screen will display.
4. After you have entered a name for the favorite, tap
The New Favorite screen will display.
5. Complete one of the following:
If you want to ... Then ...
save as a
Favorite
tap Save as Favorite.
The favorite is saved. The Preview screen will display.
save as My Home tap Save as My Home.
The favorite is saved as My Home. The Preview screen will display.
.
29
Mio Moov 200-Series, 300-Series | How do I save Favorites and My Home?
How do I navigate to a Favorite?
1. Tap the Favorite destination you want to travel to.
The Preview screen will display.
2. Tap
Your Mio will calculate the route from your current location. The 3D Map screen will display.
.
How do I navigate to My Home?
If you have not set an address as My Home, the first time you try to navigate to My Home you will be prompted to
search for an address using the address-entry wizard.
Option 1 - Via the
Your Mio will calculate the route from your current location. The 3D Map screen will display.
Option 2 - Via the
1. From the Favorite Destinations screen, select My Home.
The Preview screen will display.
2. Tap
Your Mio will calculate the route from your current location. The 3D Map screen will display.
Main Menu
Favorite Destinations
.
screen
30
Loading...
+ 93 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.