Page 1
RPM-PROBE User’s Manual
The RPM-EV6 Remote Power Manager series can be setup to be used as, an Environmental Monitoring Device by
attaching the RPM-PROBE (Temperature/Humidity Probe). This is the installation procedure of the RPM-PROBE
(Temperature/Humidity Probe).
RPM-PROBE (Temperature/Humidity Probe)
Contents of the RPM-PROBE Package
1. RPM-PROBE (Temperature/Humidity Probe)
2. RPM-PROBE User’s Manual
Installation Procedure of the RPM-PROBE
1. Connect the RPM-PROBE’s connector (RJ11) to the RPM1581EV6, RPM30241EV6/RPM30242EV6 series
“ENV1” or “ENV2” port on the front panel.
2. Configure the RPM-PROBE (see the RPM1581EV6, RPM30241EV6/RPM30242EV6 series User’s Manual).
3. Once the installation is complete go to http://www.minutemanups.com/support/warranty_reg.php to register the
product.
Page 1 of 2
Page 2
LIMITED PRODUCT WARRANTY
Para Systems, Inc. (Para Systems) warrants this equipment, when properly applied and operated within
specified conditions, against faulty materials or workmanship for a period of three years from the date of
purchase. For equipment sites within the United States and Canada, this warranty covers depot repair or
replacement of defective equipment at the discretion of Para Systems. Depot repair will be from the nearest
authorized service center. The customer pays for shipping the product to Para Systems. Para Systems
pays ground freight to ship the product back to the customer. Replacement parts and warranty labor will be
borne by Para Systems. For equipment located outside of the United States and Canada, Para Systems
only covers faulty parts. Para Systems products that are depot repaired or replaced pursuant to this
warranty shall only be warranted for the unexpired portion of the warranty applying to the original product.
This warranty applies only to the original purchaser who must have properly registered the product within 10
days of purchase.
The warranty shall be void if (a) the equipment is damaged by the customer, is improperly used, is
subjected to an adverse operating environment, or is operated outside the limits of its electrical
specifications; (b) the equipment is repaired or modified by anyone other than Para Systems or Para
Systems approved personnel; or (c) has been used in a manner contrary to the product’s User's Manual or
other written instructions.
Any technical advice furnished before or after delivery in regard to use or application of Para Systems’
equipment is furnished without charge and on the basis that it represents Para Systems’ best judgment
under the circumstances, but it is used at the recipient’s sole risk.
EXCEPT AS PROVIDED HEREIN, PARA SYSTEMS MAKES NO WARRANTIES, EXPRESSED OR
IMPLIED, INCLUDING WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE. Some states do not permit limitation of implied warranties; therefore, the aforesaid limitation(s)
may not apply to the purchaser.
EXCEPT AS PROVIDED ABOVE, IN NO EVENT WILL PARA SYSTEMS BE LIABLE FOR DIRECT,
INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OF
THIS PRODUCT, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. Specifically, Para
Systems is not liable for any costs, such as; labor for on-site installation, on-site maintenance or on-site
service, lost profits or revenue, loss of equipment, loss of use of equipment, loss of software, loss of data,
cost of substitutes, claims by third parties, or otherwise. The sole and exclusive remedy for breach of any
warranty, expressed or implied, concerning Para Systems’ products and the only obligation of Para
Systems hereunder, shall be depot repair or replacement of defective equipment, components, or parts; or,
at Para Systems’ option, refund of the purchase price or substitution with an equivalent replacement
product. This warranty gives you specific legal rights and you may also have other rights which vary from
state to state.
No employee, salesman, or agent of Para Systems is authorized to add to or vary the terms of this
warranty.
Para Systems, Inc.
972-446-7363
www.minutemanups.com
34000506 Rev1
Page 2 of 2
Loading...