Minuteman PowerBoss 26, PB260026QP, PB260026CE Service Manual

®

PowerBoss

26

Floor Scrubber

Model:Model:

Model:

Model:Model:

PB260026QPPB260026QP

PB260026QP

PB260026QPPB260026QP
PB260026CEPB260026CE

PB260026CE

PB260026CEPB260026CE

OPERAOPERA

OPERA

OPERAOPERA

TIONTION

TION

TIONTION

SERVICESERVICE

SERVICE

SERVICESERVICE

PP

P

PP

ARAR

AR

ARAR

TSTS

TS

TSTS

CARECARE

CARE

CARECARE

Revised 9/05

TT

ABLE OF CONTENTSABLE OF CONTENTS

T

ABLE OF CONTENTS

TT

ABLE OF CONTENTSABLE OF CONTENTS

PagePage

Page

PagePage

Safety Instructions 1

Electrical Requirements 2

Control Panel Identification 3

Squeegee Adjustments 4

Operating Instructions 5

Main Polyethylene Components 6, 7

Recovery Tank and Solution Tank 8, 9

Drive Assemblies 10, 11

Mainframe 12, 13

Console Assembly 14, 15

Squeegee Mechanism Assembly 16

Squeegee Assembly Complete 17

Wiring Diagram (Standard) 18

Wiring Diagram (CE Model) 19

IMPORIMPOR

IMPOR

IMPORIMPOR

CAUTIONCAUTION

CAUTION

CAUTIONCAUTION

• Operators must read and understand this manual before operating or maintaining this equipment.

• Keep hands and feet clear of moving parts while machine is in operation.

• All switches must be in the “OFF” position when charging batteries.

• Electrical motors and components can cause an explosion when operated near explosive materi-

als or vapors. Do not operate this machine near flammable materials such as solvents, thinners,
fuels, grain dusts, etc.

• Make sure all switches are turned “OFF” and battery connections are removed before performing
any maintenance procedures.

• Store or park this machine on a level surface only.

TT

ANTANT

T

ANT

TT

ANTANT

SAFETY SAFETY

SAFETY

SAFETY SAFETY

INSTRUCTIONS INSTRUCTIONS

INSTRUCTIONS

INSTRUCTIONS INSTRUCTIONS

• These machines are designed for level floor operation only. DO NOT OPERATE on ramps or
inclines.

• Battery acid can cause burns. When working on or around batteries, wear protective clothing and
safety glasses. Remove metal jewelry. Do not lay tools or metal objects on top of batteries.

• This machine is not suitable for picking up hazardous dust.

• Charging batteries generates explosive gases. DO NOT CHARGE BATTERIES WHEN OPEN

FLAMES OR SPARKS ARE PRESENT. DO NOT SMOKE. Make sure the charger is turned off
before disconnecting it from the batteries. Charge the batteries in a well-ventilated area.

• Maintenance and repairs must be performed by authorized personnel.

SASA

SA

SASA

VE VE

THESE INSTRUCTIONSTHESE INSTRUCTIONS

VE

THESE INSTRUCTIONS

VE VE

THESE INSTRUCTIONSTHESE INSTRUCTIONS

1

ELECTRICAL REQUIREMENTS:ELECTRICAL REQUIREMENTS:

ELECTRICAL REQUIREMENTS:

ELECTRICAL REQUIREMENTS:ELECTRICAL REQUIREMENTS:
This piece of equipment operates on 24 Volt DC.

BABA

TTERTTER

YY

BA

TTER

BABA

TTERTTER
4 x 6V 220AH P/N 956720
4 x 6V 275AH P/N 956740

BABA

TTERTTER

BA

TTER

BABA

TTERTTER
* Warning: Battery acid can cause burns. When working on or around batteries, wear protective clothing and safety

BABA

TTERTTER

BA

TTER

BABA

TTERTTER

1. Disconnect tank drain hose from rear of machine (6).

2. Raise tank assembly by raising rear cover and tilting tank, Figure 1.

3. Install batteries as shown in Figure 2.

REQUIREMENTS: REQUIREMENTS:

Y

REQUIREMENTS:

YY

REQUIREMENTS: REQUIREMENTS:

YY

SER SER

VICE VICE

VICE

VICE VICE

ALLAALLA

ALLA

ALLAALLA

AND INSTAND INST

AND INST

AND INSTAND INST

TION:TION:

TION:

TION:TION:

Y

SER

YY

SER SER

glasses. Remove metal jewelry. Do not lay tools or metal objects on top of batteries.

YY

INST INST

Y

INST

YY

INST INST

ALLAALLA

ALLA

ALLAALLA

TION:TION:

TION:

TION:TION:

CHARGING OF BACHARGING OF BA

CHARGING OF BA

CHARGING OF BACHARGING OF BA
Charging of batteries generates explosive gases. DO NOT CHARGE BATTERIES WHEN OPEN FLAMES OR SPARKS
ARE PRESENT. DO NOT SMOKE. Make sure the charger is turned off before disconnecting it from the batteries.
Charge the batteries in a well-ventilated area. Fluid levels should be checked before and after charging and maintained
at the proper levels.

TTERIES:TTERIES:

TTERIES:

TTERIES:TTERIES:

2

CONTROLCONTROL

CONTROL

CONTROLCONTROL

P P

ANELANEL

P

ANEL

P P

ANELANEL

IDENTIFICA IDENTIFICA

IDENTIFICA

IDENTIFICA IDENTIFICA

1. Vacuum recovery hose

2. Squeegee lift lever

3. Solution control lever

4. Brush pressure handle

5. Drain hose for recovery tank

6. Foot pedal for lower/raising brush

7. Drain hose for battery tray

8. Reverse control lever

9. Hour meter (optional)

10. Circuit breaker for vacuum motor

11. Circuit breaker for brush motor

12. Brush switch

13. Battery condition gauge

14. Vacuum switch

15. Speed control knob

16. Main power switch

17. Key switch (optional)

18. Forward control lever

19. Pump switch (optional)

20. Quick disconnect aux. out

21. Dump hose for solution tank

TIONTION

TION

TIONTION

(optional)

AUTO SCRUBBER BRUSH DESCRIPTIONAUTO SCRUBBER BRUSH DESCRIPTION

AUTO SCRUBBER BRUSH DESCRIPTION

AUTO SCRUBBER BRUSH DESCRIPTIONAUTO SCRUBBER BRUSH DESCRIPTION

TYPE TYPE

TYPE

TYPE TYPE

Bassine Natural Fiber Short DarkBrown Red Light duty

Nylon Nylon Medium Black Tan/Red General cleaning

Dyna-Scrub Nylon impregnated Long Light Red General scrubbing,

Power-Scrub Nylon impregnated Long Rust Red/Blue Moderate aggressive

Poly-Grit Nylon impregnated Long Green Brown/Black Aggressive stripping

Strata-Grit Nylon impregnated Long Dark Black Heavy duty

DESCRIPTION DESCRIPTION

DESCRIPTION

DESCRIPTION DESCRIPTION

with 500 Grit Blue vinyl tile, ceramic
Silicone Carbide tile, epoxy floors,
Fine Bristle, urethane finish,
Dense Fill uneven concrete floors

with 120 Grit Silicon scrubbing, tile floors
Carbide Fine Bristle, concrete floors
Dense Fill

with 80 Grit and scrubbing, tile
Silicon Carbide floors, unfinished
Coarse Bristle concrete floors

with 46 Grit Blue stripping/scrubbing
Silicon Carbide unfinshed
Coarse Bristle concrete

**

Durability is dependent on floor surface, chemicals used and proper care. Durability is dependent on floor surface, chemicals used and proper care.

*

Durability is dependent on floor surface, chemicals used and proper care.

Durability is dependent on floor surface, chemicals used and proper care. Durability is dependent on floor surface, chemicals used and proper care.

**

DURABILITY* DURABILITY*

DURABILITY*

DURABILITY* DURABILITY*

COLOR COLOR

COLOR

COLOR COLOR

COMP COMP

COMP

COMP COMP

TT

T

TT

ARISONARISON

ARISON

ARISONARISON

O PO P

ADSADS

O P

ADS

O PO P

ADSADS

RECOMMENDED RECOMMENDED

RECOMMENDED

RECOMMENDED RECOMMENDED
USE USE

USE

USE USE

general cleaning,
acid etching

& scrubbing vinyl
floors, ceramic tile
& concrete floors

3

SQUEEGEE SQUEEGEE

SQUEEGEE

SQUEEGEE SQUEEGEE

ADJUSTMENTSADJUSTMENTS

ADJUSTMENTS

ADJUSTMENTSADJUSTMENTS

4

OPERAOPERA

OPERA

OPERAOPERA

1. Filling: Fill the solution tank with the desired amount of water and add liquid cleaning solution to

the proper dilution ratio. DO NOT USE powdered cleaning chemicals. Powders are unlikely to
dissolve thoroughly, resulting in clogging the in-line solution filter. This can reduce or stop water
flow to the brush.

2. Close lid.

3. Turn on main power switch (refer to Page 3, #16).

4. Adjust main speed control, #15 to full counter-clockwise position.

5. Lower brush assembly.

- Depress foot pedal (6) slightly and push in on lever (4) to release, to increase brush pressure
pull up and back on lever (4) to lock in position.

- To lift the brush, press the pedal down until lift mechanism engages.

6. Turn on brush switch.

7. Adjust solution control feed lever.

8. Select vacuum operation:
Brush Driven Models – Turn vacuum switch to “On” position
Traction Driven Models

(a) “Vacuum On” mode – Vacuum will remain on until switched to the “off” position
(b) “Vacuum Auto” mode – Vacuum will come on automatically when forward or reverse

handles are squeezed, and remain on approximately 5 seconds after handle release.

9. Lower squeegee assembly.

10. Squeeze forward handle #18 and adjust forward speed.

TING INSTRUCTIONSTING INSTRUCTIONS

TING INSTRUCTIONS

TING INSTRUCTIONSTING INSTRUCTIONS

After Use:

1. Turn off solution feed.

2. Switch off brush and raise.

3. Raise squeegee assembly.

4. Turn off vacuum motor.

Solution and recovery tanks should be emptied after every use.

MAINTENANCE:MAINTENANCE:

MAINTENANCE:

MAINTENANCE:MAINTENANCE:
DailyDaily

Daily

DailyDaily

1. Clean float assembly & squeegee blades.

2. Recharge batteries (check battery acid levels before and after charging).

MonthlyMonthly

Monthly

MonthlyMonthly

1. Check wear on squeegee blades.

2. Grease front and rear wheels.

3. Grease pivot points on brush motor assembly.

4. Every 500 hours check condition of carbon brushes on vacuum motor and brush drive motor.

5

6

PartPart

Part

PartPart

s Lists List

s List

s Lists List

ItemItem

Item

ItemItem

1 260087 2 Hinge 15”
2 260091 1 Recovery Tank 260 Lt Gray
3 260092 1 Solution Tank 260 Lt Gray
4 260096B 1 Recovery Lid 260 Burgundy
5 260148 1 Solution Dump Bracket
6 260149 1 U Channel 12”
7 260157 2 Lid Gasket Short 260B
8 260158 2 Lid Gasket 260B
9 260159 1 Vac Hose 1/5 x 78” Wireloc

10 260160 1 Recovery Hose Assy. 260B

11 260169 1 Lid Flap
12 260170 2 Retainer, Flap
13 260203 2 Hose Clamp 102120 Murray
14 260212 1 Screen Filter
15 260228 1 Left Shroud Weldment
16 260230 1 Right Shroud Weldment
17 260232 2 Rubber Skirt
18 260233 2 Skirt Retainer
19 260256 1 Base 260TD Char Gray
20 260294 1 Gasket 260
21 260299 1 Shut-Off Plate Assy.
22 260301 1 Deflector Flap
23 260353 2 Lid Pivot Strap
24 260375 1 Mainframe PWRBS 260 TD
25 340664 2 Soft Latch w/Keeper
26 380204 1 380 Sideplate Weldment - Right
27 380207 1 380 Sideplate Weldment - Left
28 380215 2 Roller Pin
29 450081 1 WSR - 1.908 x 2.41 x .03 SS
30 66-436-A 2 Roller
31 710153 8 SCR-MC 10-32 x .37 ZINC
32 710180 4 SCR-MC 1/4-20 x .75 ZINC
33 711124 2 SCR-ST B 10 x .37 NI
34 711161 18 SCR-Hi/Lo 10 x 3/4 ZINC
35 711202 12 BLT-HH 1/4-20 x .50 STL ZINC
36 711350 8 Nut-Nyloc 10-32
37 711505 4 Washer - Flat 1/4
38 711544 12 WSR - 1/4 Helical
39 711715 4 Ret Ring Ext .75
40 711811 2 Hitch Pin 1/2 x 5 1/2
41 712102 2 Bolt - Shoulder 1/2 x 1.50
42 712540 14 SCR-MC 10-24 x .37 SS TH
43 712565 30 SCR-MC 1/4-20 x .62 SS
44 712667 4 Nut-Hex Nyloc 1/4-20 SS
45 715607 1 Decal - Battery Cable Routing
46 760263 2 Foam Tape 1/16 x 1/2”
47 828970 1 WSR-Neop 1.87 x 2.4 x .125
48 828971 1 Nut - 1-1/2 Pipe Thread
49 831812 1 Fitting ABS 1.5MPT 1.5HOSE

Part No.Part No.

Part No.

Part No.Part No.

QtyQty

Qty

QtyQty

..

.

..

DescriptionDescription

Description

DescriptionDescription

7

8

PartPart

Part

PartPart

s Lists List

s List

s Lists List

ItemItem

Item

ItemItem

1 130118 1 Solution Strainer M3-40
2 210045 1 Solution Control Cable
3 210370 1 Solution Valve Bracket
4 210408 1 Fitting Brass Tee 3/8MPT 3/8FPT
5 210409 1 Fitting Brass 3/8MPT 3/8FPT
6 210410 1 Fitting Brass 3/8 FPT 3/8 Hose
7 210414 1 O-Ring 2-113
8 260029B 1 Solution Lid Burgundy

9 260091 1 Recovery Tank 260 Lt Gray
10 260092 1 Solution Tank 260 Lt Gray
11 260156 1 Float Assembly
12 260162 1 Hose Solution Dump 38”
13 260178 3 Fitting Nylon T 3/8HOSE
14 260179 4 Hose Nylobraid 3/8 x 2.38
15 260182 1 Solution Hose C/L 18"
16 260184 1 Support Angle
17 260202 1 Hose Assembly 260B New Style
18 260203 1 Hose Clamp 102120 Murray
19 260214 2 Tank Cable Assembly 260
20 260215 1 Bracket, Water Valve
21 260216 1 Solution Hose 3/8 x 14.75
22 320254 1 Solution Hose
23 320269 1 Strap, Drain Plug Retaining
24 342430 1 Fitting Brass 3/8 MPT x 3/8 Hose
25 430114 1 Fitting Nylon Cap 1/4 FPT
26 450021 1 Hinge
27 450040 2 Elbow PLT 3/8MPT x 3/8Barb
28 450055 1 Hose Nylon 3/8ID 9"
29 450076 15 Crimp Clamp 185R SS
30 450081 1 WSR-SS 1.908 x 2.41 x .03 SS
31 710353 2 SCR-MC 10-32 x .37 Zinc
32 710985 2 SC 3/8-16 x .62
33 711124 1 SCR-ST-B 10 x .37 NI
34 711506 2 WSR-Flat 5/16 (Narrow) ST PL
35 711512 1 WSR-Flat .75 x 1.37 x .08
36 711513 1 WSR-Flat .689 x 1.06 x .029 SS
37 711553 2 WSR-Internal Lock #10
38 712041 2 Bolt-Shoulder 1/4-20 x .44 x .3
39 712540 7 SCR-MC 10-24 x .37 SS TH
40 712560 4 SCR-MCH 1/4-20 x .50 SS NYL
41 712563 4 SCR-MCH 1/4-20 x 1.00 SS
42 712667 4 Nut-Hex Nyloc 1/4-20 SS
43 712764 7 WSR #10 SS
44 740482 1 Diode Assembly
45 740493 1 Water Valve 24VDC
46 760220MCH 1 1.5 Adapter MCH (833310)
47 809413MCH 1 Valve, Solution
48 828490 1 Hose Clamp-Crimp 140R
49 828952 1 Fitting PP 1/4 MPT x 3/8 Barb
50 828970 2 WSR-Neop 1.87 x 2.4 x .125
51 828971 1 Nut 1 1/2 Pipe Thread
52 828975 1 WSR-Neoprene .75 x 1.5 x .09
53 829463 1 SS Washer
54 830062 1 Fitting Brass 90 3/8MPT x 3/8FPT
55 832896 2 Guide Wheel ACSII
56 832949 2 Bracket, Bumper
57 833254 2 Bumper Wheel Axle
58 833316 1 Drain Plug
59 833325 1 Fitting Nylon 90 1/4MPT 3/8HOSE

Part No.Part No.

Part No.

Part No.Part No.

QtyQty

Qty

QtyQty

..

.

..

DescriptionDescription

Description

DescriptionDescription

99

10

PartPart

Part

PartPart

s Lists List

s List

s Lists List

ItemItem

Item

ItemItem

1 210142 1 Pedal Pad
2 260030 5 Bushing .5015 x .628 x .375 OI
3 260041 2 Bushing-FLG .502 x .750 x .375
4 260043 1 Lift Arm, Left Side
5 260046 1 Pedal Brace
6 260044 1 Lift Arm, Right Side
7 260054 1 Pedal Weldment
8 260055PTD 1 Lift Handle Weldment
9 260075 1 Yoke Weldment

10 260125 1 Bushing, Yoke .407 x 1.687 STL

11 260128 1 Spacer-Yoke
12 260141 1 Spacer-Lift Arm
13 260256 1 Base 260TD Char Gray
14 260317 1 Squeegee Mech. Assy.
15 260360 1 Mainframe MMN 260TD
16 260366 2 Transaxle Bracket 260TD
17 260370 2 Wheel 10” x 2.75 x .75 BORE
18 260371 2 Key 3/16 x 3/16 x 2.00
19 710196 4 SCR-MC 5/16-18 x .75
20 710986 2 SC 3/8-16 x 1.00 Zinc
21 710992 1 Shoulder Bolt 1/2 x 1.25 x 3/8
22 711228 8 Bolt-HH 5/16-18 x .75 STL ZINC
23 711232 4 Bolt-HH 5/16-18 x 1.50
24 711250 2 Bolt-HH 3/8-16 x 1.25 STL ZINC
25 711374 2 Nut Nyloc 5/16-18
26 711375 2 Nut-Nyloc 3/8-16 1/2NUT
27 711380 2 Nut, Nyloc 3/8-16
28 711439 3 Nut-Flanged Wizz 3/8-16
29 711507 2 WSR-Flat .37 x 1.12 x .06
30 711512 2 WSR-Flat .75 x 1.37 x .08
31 711545 16 Washer Helical 5/16
32 711546 10 Washer Helical 3/8
33 711575 22 Washer Flat .31 x .75 x .06 STL
34 711579 2 WSR-Flat .56 x 1.00
35 712081 2 Shoulder Bolt 5/6-18 x .75
36 712099PLT 2 Shoulder Bolt 1/2 x 1/2
37 712310 6 WSR-Flat .52 x .87 x .06 PL
38 712680 4 Nut-Hex 5/16-18 SS
39 713042 4 Bolt-HH 3/8-16 x 1.00 #5
40 713045 1 Bolt-HH 3/8-16 x 1.75 #5
41 713048 1 Bolt-HH 3/8-16 x 2.50 #5
42 744160 1 Transaxle 13” 24V
43 762340 2 Bushing .502 x .625 x .270 STL
44 809226 2 WSR-Flat .40 x 1.50 x .12
45 809247 2 Spacer .442 x .50 x .312
46 827110 2 Caster 5”
47 832829 2 Nut-U Type 5/16-18

Part No.Part No.

Part No.

Part No.Part No.

QtyQty

Qty

QtyQty

..

.

..

DescriptionDescription

Description

DescriptionDescription

11

12

38 710180 2 SCR-MC 1/4-20 x .75 Zinc

39 712129 2 SCR-MC 8-32 x .50 Zinc

40 710823 2 SC 1/4-20 x .50 Nylon

41 710986 8 SC 3/8-16 x 1.00 Zinc

42 711128 1 SCR-ST-B Hi-Lo 8 x .62 Zinc

43 711160 3 SCR-HI/LO #10 x 5/8 Zinc

s Lists List

s Lists List

s List

PartPart

PartPart

Part

DescriptionDescription

DescriptionDescription

Description

..

..

.
QtyQty

QtyQty

Qty

Part No.Part No.

Part No.Part No.

Part No.

44 711203 2 Bolt-HH 1/4-20 x .62

45 711210 2 Bolt-HH 1/4-20 x 1.25 STL Zinc

46 711228 2 Bolt-HH 5/16-18 x .75 STL Zinc

47 711334 2 Nut-Hex 1/2-13 ST PL

48 711350 4 Nut-Hex Nyloc 10-32

49 711368 2 Wing Nut Nyloc 1/4-20 PL

50 711425 10 Nut-Flanged Wizz 1/4-20

51 711505 7 WSR-Flat 1/4

52 711510 2 WSR-Flat .50 x 1.37 x .10

53 711517 2 WSR-Flat .77 x 1.37 x .03

54 711544 2 WSR-Helical 1/4

55 711545 2 WSR-Helical 5/16

56 711713 13 Ret Ring-E Ext .50

57 711808 2 Pin-Hairpin Cotter #13

58 712301 6 WSR-Flat .37 x .87 x .06 (Wide)

59 712310 25 WSR-Flat .52 x .87 x .06 PL

60 712545 4 SCR-MC 10-32 x .87 SS

61 712667 1 Nut-Hex Nyloc 1/4-20 SS

62 740132 2 Insulator (Glastic)

63 740159 1 Circuit Brkr-175 Red Housing

64 740209 2 Gearmotor 24V 17B

65 740225 1 Vac Motor 6515 24V

66 762073 1 Bushing .259 x .375 x .265

67 809444 1 Clip Cord

68 828264 1 Washer Cup

69 828490 1 Clamp-Crimp 140R

70 829067 2 Clamp-Crimp 560R

71 832996 1 Terminal Block 2POLE VDE

72 833191 1 Hose Rubber Flex 2 x 9

73 833265PLT 1 Threaded Spacer PLT Zinc

74 833299 1 Pump 100 PSI 24V DC

75 833325 4 Fitting Nylon 90 1/4MPT 3/8HOSE

76 833621 2 Key 1/4 x 1/4 x 1

77 833638 2 Brass Stud

78 840011 1 Vac Motor Cover, Top

79 840012 1 Vac Motor Cover, Bottom

1 210066 2 Drive Hub Retainer Bolt

2A 260002 2 Pad Holder-26B

2B 260003 2 Brush Feed Thru Bassine

ItemItem

ItemItem

Item

2C 260004 2 Brush 26B Nylon

3 260009 1 Battery Tray 14GA

2D 260005 2 Brush Poly-Grit 26B

2E 260006 2 Brush Strata-Grit 26B

4 260030 8 Bushing .5015 x .628 x .375 OI

5 260036 13 Pin, Retainer

6 260038PTD 1 Motor Mount Weldment R.H.

7 360039PTD 1 Motor Mount Weldment L.H.

8 260041 13 Bushing-FLG .502 x .750 x .375

9 260049 4 Linkage Bar .312GA

11 260068 1 Spacer, Spring

10 260066 2 Bushing-FLG .377 x .687 x .406

12 260076 1 Bracket Anderson Plug

13 260077 1 Motor Frame Weldment

14 260137 1 Spring Comp .960 x 2.00 Zinc

15 260150 1 Battery Liner

16 260159 1 Hose Vac 1.5 x 78” Wireloc

17 260175 1 Cable Conduit

18 260183 2 Nut 1/4 NPT NYL

19 260187 1 Retainer Bar Weldment R.H.

20 260193 1 Solution Hose 3/8 Nylobr

13

21 260194 1 Pressure Hose 3/8 x 50

22 260203 1 Hose Clamp 102120 Murray

23 260214 2 Tank Cable Assembly 260

24 260224 1 Drain Hose 1/4 x 18 Silicone

25 260250 1 Retainer Bar Weldment L.H.

26 260315 1 Lift Cable Bracket

27 260337 1 Squeegee Cable

28 290017 1 Molded Vac Motor Gasket

29 320248 2 Pin-Clevis, Slotted

30 320271 1 Fitting PP 90 3/8MPT 3/8HOSE

31 320272 2 Nozzle Body Lock Nut

32 320273 1 Hose Shut-Off Clamp

33 364-816 1 Nut-Nyloc 1/2-13 Half

34 380064 1 Foam Ring

35 430035 2 Drive Hub

36 450038-H 2 Z-Bracket 5.7 VDE Zinc

37 450076 4 Crimp Clamp 185R SS

14

PartPart

Part

PartPart

s Lists List

s List

s Lists List

ItemItem

Item

ItemItem

Part No.Part No.

Part No.

Part No.Part No.
1 200340 2 Spacer
2 210045 1 Solution Control Cable
3 260066 4 Bushing-FLG .377 x .687 x .406
4 260069MCH 1 Left Handle
5 260070MCH 1 Right Handle
6 260099 1 Platform Handle
7 260084TDSP 1 Dashboard, Screen Printed
7CE 260084CETDSP 1 Dashboard, CE Screen Printed
8 260194 1 Hose Nylobraid C/L 50
9 260198 1 Switch Mounting Bracket

10 260210 1 Clear Polyethylene Sheet

11 260253 1 Electrical Panel
12 260254 1 Switch Actuator
13 260255 1 Speed Control Bracket
13CE 260255CE 1 Speed Control Bracket CE
14 260274 3 Rubber Grommet
15 260284 1 Back Panel
16 260286 1 Squeegee Lift Arm
17 260291 1 Handle Grip
18 260337 1 Squeegee Cable
19 320248 2 Pin-Clevis, Slotted
20 320297 1 Squeegee Assembly Complete
21 430051 2 Return Spring .313 x .438 x 2.
22 450059 1 1/4 NPT Bulkhead Fitting
23 450076 1 Crimp Clamp 185R SS
24 710178 4 SCR-MC 1/4-20 x .50
25 710180 15 SCR-MC 1/4-20 x .75 Zinc
26 711125 2 SCR-ST-B 10 x .50
27 711128 2 SCR-ST-B Hi-Lo 8 x .62 Zinc
28 711161 6 SCR-HI/LO #10 x 3/4 Zinc
29 711368 2 Wing Nut Nyloc 1/4-20 PL
30 711372 2 Nut-Nyloc 8-32
31 711373 1 Nut-Nyloc 1/4-20
32 711420 2 Nut-Hex Jam 5/16-18
33 711503 2 WSR-Flat 10
34 711505 4 WSR-Flat 1/4
35 711506 2 WSR-Flat 5/16 (Narrow) ST PL
36 711523 4 WSR-WAVE .38 x .68 x .01
37 711544 4 WSR-Helical 1/4
38 711553 1 WSR Internal Lock #10
39 711575 1 Washer Flat .31 x .75 x .06 STL
40 711594 1 WSR-Flat .56 x .88 x .03
41 711595 1 WSR-Flat .59 x 1.18 x .09
42 711668 2 Clevis Pin 3/8 x 1.00
43 711671 1 Clevis Pin .31 x 2.13 11-10
44 711808 1 Pin-Hairpin Cotter #13
45 712070 1 Bolt-Shoulder 5/16 x .75

QtyQty

Qty

QtyQty

..

.

..

DescriptionDescription

Description

DescriptionDescription

ItemItem

Item

ItemItem

Part No.Part No.

Part No.

Part No.Part No.
46 712100 2 Bolt-Shoulder 3/8 x 2.25
47 712310 5 WSR-Flat .52 x .87 x .06 PL
48 712320 2 WSR-Nylon .22 x .45 x .04
49 712540 6 SCR-MC 10-24 x .37 SS TH
50 712570 2 SCR-MC 1/4-20 x 1.75 SS
51 712814 1 SCR-MC 10-24 x .87 STPL
52 712822 8 SCR-MC 10-24 x .50 TH
53 715144 1 Decal Aux. Pump
54 715602 1 Decal Reverse 260
55 715603 1 Decal Squeegee Lift 260
56 715604 1 Decal Solution 260
57 715605 1 Decal Brush Position 260
58 715608 1 Decal Forward 260 TD
59 740131 1 70 amp Circuit Breaker
60 740132 2 Insulator (Glastic)
61 740188 1 Toggle Switch
62 740216 1 Gauge Battery Condition
63 740241 2 Contactor 24V 50 amp
64 740247 1 30 amp Circuit Breaker
65 740736 1 Vacuum Switch
65CE 742102 1 Vacuum Switch CE
66 740804 1 Potentiometer Assy
67 740811 3 Switch Boot CE
68 740944-1 1 SCR Control Board 24V
69 741005 1 Keyswitch (optional)
70 741007 1 Hour Meters (optional)
71 741037 1 5 Sec. Time Delay
72 760277 1 Switch Guard
73 760286 1 Wire Formed Hook
74 762400 1 Heyco Bushing
75 788147 1 Solenoid 24V
76 805637 1 Fiber Insulator
77 809311 2 Cotter Pin
78 809754 2 Switch Rocker
78CE 740711CE 2 Switch Rocker CE
79 809874 1 Knob
80 827060 1 Forward/Reverse Switch
81 828368 1 BH2-61 Male Coupler
82 828935 2 Spacer
83 831306 1 Street 90 1/4 Brass
84 832015 2 Spacer
85 833102 1 Spring Compression
86 833374 2 Cotter Pin
87 833473 1 Hose Barb 1/4 FPT x 3/8 Barb
88 833638 2 Brass Stud
89 881002 2 Clevis Pin 5/16 x 1

QtyQty

Qty

QtyQty

..

.

..

DescriptionDescription

Description

DescriptionDescription

15

Squeegee Mechanism Squeegee Mechanism

Squeegee Mechanism

Squeegee Mechanism Squeegee Mechanism
260317260317

260317

260317260317

AssemblyAssembly

Assembly

AssemblyAssembly

PartPart

Part

PartPart

ItemItem

Item

ItemItem

1 210375 1 Swivel Pin
2 210391 2 Torsion Spring .563 x 2.595 SS
3 210400 2 Spacer Tube
4 260041 2 Bushing-FLG .502 x .750 x .375
5 260292 4 Swing Bolt Zinc Plated
6 260312 1 Yoke Weldment 260
7 260314 1 Spring Housing Weldment
8 320008 2 Pivot Bracket Asy.
9 430051 2 Return Spring .313 x .438 x 2.

10 712592 2 SCR-MC TH 1/4-20 x 3 SS

11 711425 2 Nut-Flange Wizz 1/4-20
12 711504 1 WSR-Flat 1/4 SS
13 711517 2 WSR-Flat .77 x 1.37 x .03
14 711671 1 Clevis Pin .31 x 2.13 11-10
15 711715 2 Ret Ring Ext .75
16 711808 1 Pin-Hairpin Cotter #13
17 712320 2 WSR-Nylon .22 x .45 x .04
18 712536 2 SCR-MC 10-24 x .62 SS
19 712562 1 Bolt-HH 1/4-20 x .75 SS
20 712665 2 Nut-Hex 1/4-20 SS
21 712758 1 WSR-Helical 1/4 SS

Part No.Part No.

Part No.

Part No.Part No.

s Lists List

s List

s Lists List

QtyQty

..

Qty

.

QtyQty

..

DescriptionDescription

Description

DescriptionDescription

16

SQUEEGEE SQUEEGEE

SQUEEGEE

SQUEEGEE SQUEEGEE
320297320297

320297

320297320297

ASSEMBLASSEMBL

ASSEMBL

ASSEMBLASSEMBL

YY

COMPLETE COMPLETE

Y

COMPLETE

YY

COMPLETE COMPLETE

Parts ListParts List

Parts List

Parts ListParts List

17

WIRING DIAGRAM TRACTON DRIVE CE MODELWIRING DIAGRAM TRACTON DRIVE CE MODEL

WIRING DIAGRAM TRACTON DRIVE CE MODELWIRING DIAGRAM TRACTON DRIVE CE MODEL

WIRING DIAGRAM TRACTON DRIVE CE MODEL

18

ANDARD MODELANDARD MODEL

ANDARD MODELANDARD MODEL

ANDARD MODEL

ON DRIVE STON DRIVE ST

ON DRIVE STON DRIVE ST

ON DRIVE ST

TRACTTRACT

TRACTTRACT

TRACT

WIRING DIAGRAM WIRING DIAGRAM

WIRING DIAGRAM WIRING DIAGRAM

WIRING DIAGRAM

19

LIMITED WLIMITED W

LIMITED W

LIMITED WLIMITED W

Minuteman International, Inc. warrants to the original purchaser/user that this product is free from defects in workmanship and
materials under normal use and service for a period of three years from date of purchase. In addition, Minuteman International,
Inc. will, at its option, honor labor warranty claims for the first 12 months from date of sale, provided such claims are submitted
through and approved by factory authorized repair stations. Minuteman International, Inc. will, at its option, repair or replace
without charge, except for transportation costs, parts that fail under normal use and service when operated and maintained in
accordance with the applicable operation and instruction manuals.

This warranty does not apply to normal wear, or to items whose life is dependent on their use and care, such as belts, cords,
switches, hoses, rubber parts, electrical motor components or adjustments. Parts not manufactured by Minuteman International,
Inc. such as engines, batteries, battery chargers, hydraulic pumps, and tires are covered by and subject to the warranties and/
or guarantees of their manufacturers. Please contact Minuteman International, Inc. for procedures in warranty claims against
these manufacturers.

Special warning to purchaserSpecial warning to purchaser

Special warning to purchaser — Use of replacement filters and/or prefilters not manufactured by Minuteman International,

Special warning to purchaserSpecial warning to purchaser
Inc. or its designated licensees, will void all warranties expressed or implied.

A potential health hazard exists without exact original equipment replacement.

All warranteed items become the sole property of Minuteman International, Inc. or its original manufacturer, whichever the case
may be.

Minuteman International, Inc. disclaims any implied warranty, including the warranty of merchantability and the warranty of
fitness for a particular purpose. Minuteman International, Inc. assumes no responsibility for any special, incidental or
consequential damages.

ARRANTYARRANTY

ARRANTY

ARRANTYARRANTY

This limited warranty is applicable only in the U.S.A. and Canada, and is extended only to the original user/purchaser of this
product. Customers outside the U.S.A. and Canada should contact their local distributor for export warranty policies. Minuteman
International, Inc. is not responsible for costs or repairs performed by persons other than those specifically authorized by
Minuteman International, Inc. This warranty does not apply to damage from transportation, alterations by unauthorized persons,
misuse or abuse of the equipment, use of non-compatible chemicals, or damage to property, or loss of income due to
malfunctions of the product.

If a difficulty develops with this machine, you should contact the dealer from whom it was purchased.

This warranty gives you specific legal rights, and you may have other rights which vary from state to state. Some states do not
allow the exclusion or limitation of special, incidental or consequential damages, or limitations on how long an implied
warranty lasts, so the above exclusions and limitations may not apply to you.

A Minuteman International Company

World HeadquartersWorld Headquarters

World Headquarters Minuteman Canada, Inc.

World HeadquartersWorld Headquarters
Minuteman International, Inc. 2210 Drew Road
111 South Rohlwing Road Mississauga, Ontario
Addison, Illinois 60101 L5S 1B1

[phone] [phone]
FAX [phone] FAX [phone]

988013

Rev. A 9/05

Printed in U.S.A.