Minuteman ED6200RMN1, ED12000RM Specsheet
Endeavor
®
6kVA Rackmount/Tower UPS Series
Double Conversion On-line True Sine Wave
Uninterruptible Power Supply
ED6200RM - 6000VA/4200Watts UPS
ED6000RMXFMR - Transformer Module
EDBP6000RM - Battery Pack Module
MinUteMAn® 6kVA on-line rAckMoUnt/tower UPS.
Simple parallel installat i o n s (n o extra PCB
•
required)
Full digital signal processor
•
Easy-to-set user personalization
•
Intelligent self diagnosis
•
Smart fan control
•
Emergency Power Off (EPO) function
•
True double conversion on-line technology
•
High input Power Factor and low voltage THD
•
Energy efcient UPS
•
LCD/LED panel
•
2X customer options slots
•
Smart ECO
•
i-Batt (automatically manages end of discharge
•
voltage according to load capacity)
Cold start function
•
Communication capability
•
Remotely test the major operating functions
•
of UPS
Communicate via SNMP/Web card
•
Access UPS via the Internet
•
PPlicAtionS
A
VoIP
•
Data centers
•
Server racks
•
Large network switches
•
Total rack tower support
•
Large PBX systems
•
6kVA on-line UPS FeAtUreS
True on-line architecture supplies critical device
•
with transient-free pure sine wave AC power
LCD/LED front panel displays status of UPS
•
Switches to bypass automatically in case of
•
overloading at 150%
Maintenance free sealed-type battery minimizes
•
after-sales service
Intelligent, temperature-controlled
•
Can be congured as tower or rackmount
•
oPtionS
Maintenance bypass
•
Galvanic isolated transformer
•
Para Systems, Inc. • 800.238.7272• 1455 LeMay Drive • Carrollton, Texas 75007 USA
www.minutemanups.com•www.sizemyups.com • www.sizemypdu.com • www.comparemyups.com
Option
Card
Slot 2
Option
Card
Slot 1
Utility
Input
Breaker
Cooling
Fans
RS-232
Connector
Utility
Input
Connector
UPS
Output
Connector
Terminal Resistor
for Parallel
Function &
CAN Bus
Connection
for Parallel System
UPS
Output
208V
Utility
Input
Transformer
Output
120V
Uninterruptible
Power
Supply
Transformer
for 120V
System
Battery
Module
DC
Breaker
UPS
Input
Maintenance
Bypass
Emergency
Power Off
Maintenance
Bypass
Connection
External
Battery
Connectors
Additional
Battery
Pack
Connection
120V
208V
240V
120V
208V
240V
endeAVor 6kVA trUe on-line
rAckMoUnt/tower UPS
P
ArAllel For cAPAcity conFigUrAtionS
This conguration uses mirrored Endeavor 6kVA
rackmount UPS system to achieve higher than 6kVA loads.
Currently, parallel capacity congurations can be used
to accommodate output loads of 12, 18, and 24kVA for
208V/240V systems.
Parallel for Capacity Conguration Table
Model ED12000RM ED18000RM ED24000RM
Input 12kVA
208V/240V
18kVA
208V/240V
24kVA
208V/240V
MAin control ModUle - ed6200rM
The Main Control module takes only 2U in rack height
and provides 208/240V input and output. Input is hardwired
to the unit. The main control module has a LCD/LED display.
Each control module must have at least one battery back
(EDBP6000RM). Parallel functions are available for up to 208V
24kVA. N+1 full-redundancy function is available up to 18kVA for
208/240V applications and 6kVA for 120V applications. Optional
receptacle boxes are available for 6kVA units.
trAnSForMer ModUle - ed6000rMXFMr
The transformer module steps down the 208/240V input to
120/208/240V output, takes 2U in rack height, and requires a
control module (ED6200RM), and Battery Pack (EDBP6000RM) to
work. It has an internal bypass switch for single 6kVA installations
(Not available on parallel installations). It handles 208/240V input
and 120/208/240V output.
BAttery PAck ModUle - edBP6000rM
Each battery pack module (EDBP6000RM) occupies 3U
in rack height and requires a control module (ED6200RM) to
operate. Multiple battery packs can be daisy chained. Only one
receptacle box can be attached to a battery pack module.
Battery packs are charged through the main UPS.
PArAllel conFigUrAtionS
In addition to a stand-alone conguration, the Endeavor
6kVA rackmount UPS can be congured as:
Parallel for capacity (12, 18 and 24kVA output load)
•
Redundancy (N+1) (6, 12, and 18kVA). This allows all
•
of the load to be shifted to the other UPS units when
one is taken ofine. Congurations using more than two
control modules will require a parallel kit and an external
maintenance bypass switch.
NOTE: 120V output from the Endeavor 6kVA rackmount UPS is
available only in a 6kVA stand-alone conguration or a Parallel
for Redundancy (N+1) 6kVA 208V/240V input and 6kVA 120V
output made up of two ED6200RM control units, two EDBP6000RM
battery packs and two ED6000RMXFMR transformers.
Output Load 12kVA
Watts 8400 12600 16800
Rack height 10 U 15 U 20 U
ED6200RM 2 3 4
EDBP6000RM
Battery Pack
ED6-PARALLEL
Parallel kit
External
Maintenance
Bypass Switch
edUndAncy (n+1) conFigUrAtionS
r
208V/240V
2 3 4
1 1 1
1
ED6-MTBS21 ED6-MTBS41 ED6-MTBS4
18kVA
208V/240V
24kVA
208V/240V
This conguration is used to provide redundancy
backup. When one UPS is taken ofine, this conguration
allows the load to be redistributed to the remaining UPS
units.
Redundancy (N+1) Conguration Table
Model TBA ED12000RM ED18000RM ED24000RM
Input 6kVA
Output Load 6kVA
Watts 4200 4200 8400 12600
Rack height 14 U 10 U 15 U 20 U
ED6200RM 2 2 3 4
EDBP6000RM
Battery Pack
ED6000RMXFMR 2 n/a n/a n/a
ED6-PARALLEL
Parallel kit
External
Maintenance
Bypass Switch
208V/240V
120V
2 2 3 4
1 1 1 1
N/A 1
6kVA
208V/240V
6kVA
208V/240V
ED6-MTBS21 ED6-MTBS4
12kVA
208V/240V
12kVA
208V/240V
18kVA
208V/240V
18kVA
208V/240
1
ED6-MTBS4
Loading...