How it Works
Minuteman
Loading...
C83930-15

Minuteman C83905-15, C83985-16, C83930-16, C83930-15, C83985-21 Parts And Instruction Manual

...
Download
Page 1
Parts and Instruction Manual
X839 Asbestos Series
Wet/Dry Vacuum
Page 2
This manual is furnished with each new MINUTEMAN X839 Asbestos Vacuum. This provides the necessary operating and preventive maintenance instructions. Operators must read and understand this manual before operating or servicing this machine.
This machine was designed to give you excellent performance and efficiency. For best results and minimal cost, please follow the general guidelines below:
· Operate the machine with reasonable care.
· Follow the manufacturers suggested maintenance instructions as provided in this booklet.
· Use original Minuteman supplied parts.
TECHNICAL SPECIFICATIONS
Model X839
Polyethylene Wet/Dry
Model No.
C83985-16 C83985-15 C83905-16 C83905-15 C83930-16 C83930-15 C83985-21 C83985-20 C83905-21 C83905-20 C83930-21 C83930-20
Voltage
115 230 115 230 115 230 115 230 115 230 115 230
Tank Size
15 gal (57 ltr) 15 gal (57 ltr) 15 gal (57 ltr) 15 gal (57 ltr) 15 gal (57 ltr) 15 gal (57 ltr) 20 gal (76 ltr) 20 gal (76 ltr) 20 gal (76 ltr) 20 gal (76 ltr) 20 gal (76 ltr) 20 gal (76 ltr)
Air Flow
95 CFM (2.69 m³/min) 95 CFM (2.69 m³/min) 115 CFM (3.26 m³/min) 115 CFM (3.26 m³/min) 100 CFM (2.83 m³/min) 100 CFM (2.83 m³/min) 95 CFM (2.69 m³/min) 95 CFM (2.69 m³/min) 115 CFM (3.26 m³/min) 115 CFM (3.26 m³/min) 100 CFM (2.83 m³/min) 100 CFM (2.83 m³/min)
Waterlift
85” (2159mm) 85” (2159mm) 105” (2667mm) 105” (2667mm) 130” (3302mm) 130” (3302mm) 85” (2159mm) 85” (2159mm) 105” (2667mm) 105” (2667mm) 130” (3302mm) 130” (3302mm)
Page 3
Table of Contents
IMPORTANT SAFETY INSTRUCTIONS.............................................................................................. 1
Inspection............................................................................................................................................ 2
Electrical - 115 Volt ............................................................................................................................. 2
Electrical - 240 Volt............................................................................................................................. 2
Grounding Instructions...................................................................................................................... 2
User Maintenance Instructions ......................................................................................................... 3
Cloth Bag & Hose Assembly...................................................................................................... ........ 3
Cord Storage....................................................................................................................................... 3
Tank/Filter Set-Up Procedure ............................................................................................................ 4
Procedures for Removing Contaminated Filters / Cleaning of Cont aminated Tank ..................... 4
Poly Tank with 1:1 Adapter ................................................................................................................ 6
WARNING INSTRUCTIONS FOR 800012 & 805037 PLASTIC BAGS............................................... 7
Exploded Views .................................................................................................................................. 8
Lid Assembly ................................................................................................................................... 8
Lid Assembly BOM ..........................................................................................................................9
Bag Assembly ............................................................................................................................... 10
Adapter Assembly ......................................................................................................................... 11
Tank Assembly .............................................................................................................................. 12
Optional Industrial Tools and Accessories .................................................................................... 13
Hose Assemblies........................................................................................................................... 14
Minuteman International Made Simple Commercial Limited Warranty........................................ 15
Page 4
Poly Tank with 1:1 Adapter
1. Motor Lid Assembly
2. Cloth Filter with Frame
3. Filter Protector
4. 1:1 Poly Adapter
5. Plastic Liner for Top Fill Dry Pickup
6. 15/20 Gallon Poly Tank
Parts an d Instruction Manual
Page 6
Page 5
Exploded Views
Lid Assembly
Parts an d Instruction Manual
Page 8
Page 6
Lid Assembly BOM
ITEM PART NO. REQ’D DESCRIPTION
1 110003 1 MOUNTING PLATE (110038) 2 110012 1 MOUNTING PLATE (110039) 3 110028PKG 1 PREFILTER SLEEVE, PKG OF 6 (110038) 4 110030PKG 1 PREFILTER SLEEVE, PKG OF 6 (110039) 5 110038 1 FILTER-HEPA, 10" 6 110039 1 FILTER-ULPA, X839 SERIES 7 255008 2 BRUSH, CARBON - 105/130 8 255039 1 V ACUUM MOT OR, BYPASS 115V-105 8A 255040 1 V ACUUM MOT OR, BYPASS 240V-105 9 290030 1 LID GASKET DIECUT 15G 290 10 380001-4 1 VACUUM MOTOR, BYPASS 115V-85 (ECM) 10A 380054 1 V ACUUM MOTOR, BYPASS 240V-85 11 380005 2 BRUSH, CARBON - 85 (ECM) 11A 380028 2 BRUSH, CARBON - 85 12 380064 1 RING, FOAM 13 381020 1 CORD-16GA-3 50FT MED GREY 13A 740600 1 CORD-EUROPEAN F3 G1.5MM 50FT 14 450088 1 SP ACER-SWITCH, FOAM 15 710329 8 SCR-MC 8-32 X .50 ZINC 16 710355 2 SCR-MC RD HD 10-32 X .50 ZINC 17 711124 1 SCR-ST-B 10 X .37 NI 18 711126 6 SCR-ST-B 10 X .75 19 711310 2 NUT-HEX 10-32 ST PL 20 711373 4 NUT-NYLOC 1/4-20 21 711502 8 WSR-FLT #8 22 711505 2 WSR-FLT 1/4 23 711519 4 WSR-FLT .25 X 1.01 X .06 24 711552 8 WSR-INT LOCK #8 25 711553 3 WSR-INT LOCK #10 26 711803 2 PIN-COTTER .06 X .75 27 712532 3 SCR-MC 10-24 X 1.00 SS 28 712908 3 NUT-FLANGED WIZZ 10-24 29 715029 1 DECAL-NAME PLATE SERIAL 30 715069 1 DECAL-FILTERS CHECK 31 715102 1 DECAL-P/V HEPA 85 31A 715103 1 DECAL-P/V HEPA 105 31B 715104 1 DECAL-P/V HEPA 130 32 715115 1 DECAL-WARNING PV DRY 33 715501 1 DECAL-MADE IN USA 34 740014 4 QC-14-16G 1/4 FULL INS FEMALE 35 740088 1 SWITCH-VAC LIGHT SENSOR 36 740116 1 WIRE ASSY 16G GRN/YEL 14.50" 37 760212 1 VAC SENSOR TUBE 38 760213 1 VENTURI TUBE 39 760896PLT 1 SHROUD, MOTOR PLATED 40 760897PLT 1 MOTOR COVER PLATED P/V 41 760898PLT 1 CAP MOTOR P/V PLATED 42 760899 1 HANDLE BAIL PIC VAC 43 760903 1 MOTOR LID ASY PV HEPA 44 760904 1 BUSHING-SNUB .375 X .469 X .43 45 760905 1 GASKET, FILTER MOUNTING PLATE 46 809754 1 SWITCH-ROCKER 47 828995 2 GASKET-NEOP 2.5X6X.62 48 831478 1 GASKET-NEOP 6 X 7.5 X .37 49 831484 1 GASKET 3.5 X 4.5 X .37 50 831524 1 VACUUM MOTOR, 3-STAGE 115V-130 50A 831526 1 VACUUM MOTOR, 3-STAGE 240V-130 51 831626 1 GASKET 4 X 7.37 X .250 52 831652 3 SPACER-.264 X .344 X .750 ALM 53 832070 2 CONNECTOR 54 833237 1 STRAIN RELIEF W/ NUT
Parts an d Instruction Manual
Page 9
Page 7
Bag Assembly
ITEM PART NO. REQ’D DESCRIPTION
1 750097 1 BAG FRAME WELDMENT ASY 2 760131 1 MOLDED BAG RING- BLACK 3 805054 1 BAG, CLOTH BAG ONLY NEW STYLE 4 805057 1 BAG ASY COMP W/FRAME
Parts an d Instruction Manual
Page 10
Page 8
Adapter Assembly
ITEM PART NO. REQ’D DESCRIPTION
1 380046 1 BALL, HOLLOW RUBBER 2 390001 1 MOLDED TRIGGER 3 390002 1 SPRING-RETURN 4 390035 2 LATCH 390 SERIES COATED 5 390037 1 ADAPTER POLY 1:1 BURGUNDY 6 390087 1 GASKET DIECUT VNN 7 390088 1 GASKET PS BACK 1:1 POLY 8 390101 1 INTAKE 9 390108 1 PIN-PIVOT 10 390110 1 INT AKE ASSEMBL Y ALUMINUM 11 712530 2 SCR-MC 10-24 X .62 SS 12 712565 4 SCR-MC 1/4-20 X .62 SS 13 715381 1 DECAL-MMAN .8 X 5.5 LT GREY 14 760234 1 BAG, LINT TRAP FILTER 10 X 9 1 15 760260 1 SPRING-RETAINER BAG 16 762300 1 MOUNTING PLATE PRE FILTER 17 800422 1 LIQUID SHUTOFF PLATE 18 800423 2 LATCH PLATE ZINC PLT 19 828893 8 RIVET-BAP KTR64BX
Parts an d Instruction Manual
Page 11
Page 9
T ank Assembly
ITEM PART NO. REQ’D DESCRIPTION
1 390031 1 HANDLE PLT 390 SERIES 2 390033 1 AXLE 390 SERIES PLATED 3 390035 2 LATCH-390 SERIES COATED 4 390041 1 TANK 15GRC NO HOLES 4A 390051 1 TANK 20GRC W/ NO HOLES 5 710182 2 SCR-MC 1/4-20 X 1.00 ZINC 6 711352 4 NUT-ACORN 1/4-20 ST N1 7 711444PLT 4 NUT-WELD 1/4-20 PLATED 8 711505 2 WSR-FLT 1/4 9 711524 2 WSR-WAVE .52 X .87 X .01 10 711594 2 WSR-FLT .56 X .88 X .03 NICKEL 1 1 711713 2 RET RING-E EXT .50 12 712541 4 SCR-TR HD 1/4-20 X 1.0 SS 13 712761 4 WSR-FLT .28 X 1.25 X .059 SS 14 715119 1 DECAL-DANGER 3.25 X 7 15 715120 1 DECAL-INSTRUCTIONS 3.25 X 7 16 715383 1 DECAL-MMAN 1 X 6.88 LT GRAY 17 804457 2 CASTER-3" BLACK HUB/GREY TIRE 18 828894 4 RIVET-POP BAPKTR-69 19 828980 4 GASKET 20 833316 1 DRAIN PLUG 21 833831 2 CLAMP BACK PLATE 22 900008 2 WHEEL-8.00 DIA. *** 390040 1 TANK ASY 15GRC NO INT W/DP *** 390050 1 TANK ASY 20GRC NO INT W/DP
Parts an d Instruction Manual
Page 12
Page 10
Optional Industrial Tools and Accessories
Parts an d Instruction Manual
Page 13
Page 11
Hose Assemblies
Parts an d Instruction Manual
Page 14
Loading...
Buy Points How it Works FAQ Contact Us Questions and Suggestions Privacy Policy Cookie Policy Terms of Use