Minuteman 190400 SOLUTION TANK User Manual

SOLUTION TANK

OPERATION ￭ SERVICE ￭ PARTS ￭ CARE

190400

14N845 U.S. Route 20, Pingree Grove, IL 60140 USA

Phone [phone] - www.minutemanintl.com

A Member of the Hako Group

Printed in USA

988350

Rev E 09/12

ASSEMBLY INSTRUCTIONS

Take the FITTING-1/4 X 1/4 PLST 90 BARB (190421) and install a GROMMET (190403) onto
one leg of the elbow. Take HOSE-1/4 ID X 8" LONG (190423) and install it onto the leg where
the grommet was just placed. Then take HOSE 1/4 ID X 1.5 LONG (190420) and install it onto
the open leg of the fitting.

Parts: 190421 / 190403 /190423 / 190420

Install the tube assembly into the hole in the bottom of the housing (oriented toward the center
hub) as shown above.

The orientation must be as shown.

1

Slide the plastic sleeve onto the tube and into the hole (as shown above). Then trim the HOSE­1/4 ID X 8" LONG (190423) so that there is about 1-1/2” of tubing protruding from the frame.

Parts: 190423

Press the ADAPTER 1/4 X 3/8 PLS (190422) into the HOSE-DUMP 24IN CLEAR C/L (430118).
Then press the hose onto the FITTING-1/4FPT 3/8HOSE BRASS (833473) as shown at right.

Parts: 190422 / 430118 / 833473

2

SOLUTION TANK ASSEMBLY

BILL OF MATERIAL - 190400

ITEM PART NO. REQ'D DESCRIPTION

1 190401 1 HANDLE GRIP
2 190402 1 LONG HANDLE, VALVE
3 190403 1 GROMMET, SEAL
4 190404 1 TANK, SOLUTION
5 190422 1 ADAPTER, HOSEBARB
6 190405 1 VALVE, MAIN SOLUTION COMPLETE
7 190406 1 WASHER, VALVE SEAL
8 190407 1 HEX NUT, VALVE

9 833473 1 HOSEBARB, 1/4 NPT X 3/8H
10 430118 1 HOSE, 3.8" X 24" CLEAR
11 190408 2 U-BOLT KIT (INCLUDES ITEMS 12-15)
12 190427 2 U-BOLT
13 190428 2 PLATE, RETAINER
14 190429 4 HEX NUT, 5/16"-18UNC
15 190417 4 CAP, 10 X 14MM
16 190423 1 HOSE, 6MM X 203MM CLEAR
17 190421 1 FITTING, HOSE BARB 90 DEGREES
18 190420 1 HOES, 6MM X 38MM CLEAR
19 190430 1 VALVE, FLOW CONTROL

SHAMPOO FEED KIT (INCLUDES

20 190424 1
21 190418 1 SQUARE U-BOLT KIT (OPTIONAL - SET OF 2)
22 988350 1 INSTRUCTION SHEET

INSTRUCTION SHEET)

3