Page 1
MINUTEMAN
®
CPE
™
Series
On-line uninterruptible power supplies
with optional extended runtime
800.238.7272 | +1 972.446.7363
www.minutemanups.com
Page 2
MINUTEMAN
Features at a Glance
Compact Tower Design to Meet Your Installation Needs
UnityInputPowerFactorforMaximumEfciency
Easy Maintenance and Swappable Battery
Smart Battery Management
Matching Battery Cabinets
Complete Circuitry Protection
The CPE is a sophisticated yet affordable single-phase UPS
system. It offers on-line technology and a wide input voltage
range to provide a constant clean, steady sine wave to protected
equipment, even without going to battery mode. It can instantly
switch to battery, and its battery management system and easy,
swappable battery packs make maintenance trouble free.
The CPE is Ideal for Protecting
Servers & Networks
Telecommunications Equipment
Industrial Equipment
Medical Imaging Equipment
Any Sensitive Electronic Devices
CPE
®
™
Series
User-Friendly Control Panel
The user-friendly display clearly communicates the UPS status,
and makes diagnostics a trouble-free task. The standard communications software allows for easy control and shutdown of
your protected equipment during a blackout, and also lets you
remotely perform diagnostics, communicate to the UPS via
SNMP/web/network adapter, access UPS functions through the
web,andreceivealertsaboutspeciceventsviaSMSmessages. The free software supports Novell NetWare, Windows
95/98/2000/Me/XP/NT, Linux, and FreeBSD. Major UNIX
platforms are also available.
Communications
The CPE comes standard with shutdown software. The software gives you control of the UPS, and allows a graceful shutdown when the utility power fails, and gives you the ability to:
Remotely test major operating functions of the UPS
Communicate via SNMP/web/network (with adapter card)
Access UPS functions via the web
ReceiveSMSalertswhenspeciceventsoccur
The unity input power factor meets today’s industry standard
forenergysavingsandlowreectedharmonics,soyougetthe
maximum protection available.
Microprocessor Control
The CPE’s advanced microprocessor control gives you greater
reliability, functionality and smaller size than other designs. The
systems feature high overload handling without transfer to the
bypass. You are also protected in case of short circuit or over-
temperature conditions.
Easy Plug and Play Design
The CPE is easy to install. All models come standard with
input cables, so all you have to do is plug the unit into your
utility power and plug the equipment you want protected into
the back of the unit. Turn it on and you’re done! Every CPE
unit automatically senses the operating frequency, and adjusts
accordingly.
A standard RS232 interface allows you to communicate with the
UPS through a network or computer. The standard software is
compatible with Novell NetWare, Windows 95/98, Windows NT,
Windows XP, or other Windows systems, Linux, and FreeBSD.
The CPE also has SNMP adaptability through an optional
SNMP card. Optional AS/400 or True Relay Interface cards also
give the ability to remotely monitor the UPS using a variety of
computing platforms.
Precision Power Conditioning
Tight Voltage Regulation
Frequency Isolation
Good Harmonic Reduction
Unity Power Factor Input, with 0.5 Lagging to Unity
Short Circuit Protection
Transient Protection
www.minutemanups.com
800.238.7272| +1 972.446.7363
Page 3
Batteries
Batteries are the most expensive component of a UPS system. Protect them and extend their life with the Smart Battery
Management System (SBMS). SBMS continuously monitors
battery status and recharges whenever necessary, so you have
worry-free battery power.
Matching battery cabinets make your CPE look great and allow
you easy battery access.
Battery Specications
Battery Type: Sealed Lead Acid Maintenance Free
Quantity (pcs) (1kVA / 2kVA / 3kVA) 3 6 8
Voltage (VDC) (1kVA / 2kVA / 3kVA) 36 72 96
Recharge Time 8 hours to 90%
Battery Run Time Reference (Internal Battery)
Load 1 kVA 2 kVA 3 kVA
400VA / 280W 28 Min. 63 Min. 96 Min.
800VA / 560W 9 Min. 25 Min. 72 Min.
1000VA / 700W 8 Min. 17 Min. 24 Min.
1500VA / 1050W 10 Min. 18 Min.
2000VA / 1400W 7 Min. 14 Min.
2500VA / 1750W 10 Min.
3000VA / 2100W 8 Min.
Extended
batteries with
matching
cabinets can
extend run times
to virtually any
length of time.
Communications Options
True Relay Card
A 10-pin terminal is supported to offer the signals of Bypass, Utility Normal/Failure, Inverter On, Battery Low, Battery Bad, UPS
Alarm, and UPS Shutdown.
AS/400 Card
A DB9 port is supported to offer the signals of Bypass, Utility Normal/Failure, Inverter On, Battery Low, and UPS Shutdown.
WEB/SNMP Card
Integrates multi-network communication protocols to enable comprehensive, easy-to-understand and secure remote monitoring and
management of the UPS via the Internet.
www.sizemyups.com
800.238.7272 | +1 972.446.7363
Page 4
MINUTEMAN
Model 1000 VA 2000 VA 3000 VA
Input
Voltage (VAC) 80 - 140
Frequency 50/60 +/- 5% (Auto Sensing)
Phase Single
Input Power Factor Correction >0.98 (Full Load)
Input Power Cord (NEMA) 5-15P 5-20P L5-30P
Output
Voltage (VAC) 100/110/115/120
Capacity (VA/W) 1000VA/700W 2000VA/1400W 3000VA/2100W
Rated Power Factor 0.7 Lagging
Load Power Factor Range 0.5 Lagging to Unity within KW Rating of Unit
Wave Form Sine Wave, THD <3% (no load to full load)
Voltage Regulation +/- 2%
Transient Response (ms) +/- 4% Under Full Load, Change and Corrected within 60 ms
Frequency Stability +/- 0.5 Hz (Free Running)
Synchronization Slew Rate: 1 Hz/Sec. Max Synchronizing Window +/-5%
Transfer Time 0 ms
Crest Factor 3:1
Runtime (Full Load) >8 min. >7 min. >8 min.
DC Start Yes
Outlets (NEMA) 120 VAC 4 x 5 - 15R 4 x 5 - 15R + 2 x 5 - 15/20R 6 x 5 - 15R + 2 x 5 - 15/20R
Display
LED Indicators Utility, Battery Low, Inverter, Bypass, Test OK, Overload Fault, Load/Battery Level, and System Fault Conditions
Self Diagnostics On-Demand Push Button
Alarms
Audible and Visual Line Failure, Battery Low, Transfer to Bypass, Overload, System Fault Conditions
Physical
Tower Net Dimensions (WxHxD, in.) 5.8 x 8.78 x 15.8 5.1 x 14.4 x 18.9 7.5 x 14.4 x 17.8
Tower Net Weight (lbs. / kg) 33 / 15 60 / 27 79 / 36
Environmental
Operating Temperature 0° C - 40° C
Altitude 0 to +10,000 ft
Humidity 30 to 90% RH Maximum, Non-condensing
Noise < 45 dB at 1 meter
Safety Conformance
Safety Standard EN500091-1, UL1778, CSA 22.2
EMC Standard EN500091-2, EN61000-3-2, EN61000-3-3, FCC Class A
Agency Marks UL, CE, cUL
®
CPE
™
Series Specifications
MINUTEMAN UPS / Para Systems, Inc.
1455 LeMay Drive, Carrollton, TX 75007
Phone 800.238.7272 +1 972.446.7363 Fax +1 972.446.9011
© Copyright 2006, Para Systems, Inc. Product specications are subject to change without notice. MINUTEMAN is a registered trademark and MINUTEMAN CPE is a trademark of Para Systems,
Inc.
Tower Models (Rear View)
PN-34000289 - 10-09
Loading...