MINTRONIX MP5000A/J, MP5000A, MP5000J User Manual
M I N T R O N I X C O M P U T E R S O L U T I O N S
User’s Guide
M P 5 0 0 0 A / J A L L - IN- O N E T O U C H S C R E E N
C O M P U T E R S Y S T E M
This manual is intended to provide both general information on small point of sales
technology and technical specifications of the MP5000A/J computer. The information
provided herein is of a proprietary nature to the original manufacturer and may not
be distributed without express written consent from an officer of the company. This
manual has been supplied in confidence and is intended for use by authorized
recipients only. This manual may not be copied or reproduced in whole or in part, nor
may its contents be revealed in any manner to any person other than the authorized
personnel.
This document has been prepared with the utmost effort to insure the information
contained within is accurate and complete. However, the original manufacturer
reserves the right to make product improvements or changes at any time without
advanced notice. Furthermore, the original manufacturer assumes no liability arising
from use of the products described herein. Working with the MP5000A/J
computer involves hazardous levels of voltages and can present serious shock hazard.
Work should only be performed by appropriately qualified technical personnel.
The original manufacturer’s products are not authorized or designed for use in critical
lifesaving equipment. The original manufacturer’s products are warranted for one
year from the date of purchase against component and workmanship defects. The
original manufacturer’s Return Merchandise Authorization (RMA) policy requires the
user to obtain an RMA # prior to sending back any item to be repaired or replaced.
Replacement or repair will be free of charge for all items under warranty only when
the merchandise is returned to the original manufacturer, not a third-party repair
depot. Returned goods need to have pre-paid freight along with a copy of the original
invoice; collect freight items will not be accepted and will be returned to sender. For
specific return circumstances and/or warranty information, please contact your
dealer.
All trademarks mentioned herein belong to their respective companies.
Copyright: 2018
M I N T R O N I X C O M P U T E R S O L U T I O N S
124 Old Mill Road, Suite H
Greenville, SC 29607
855-672-6464
Version 1-2018
Page 3
Table of Contents
1.0
Introduction
5
2.0
Standard Features
5
3.0
Input/Output
6
4.0
Graphics
6
5.0
Touch Screen
6
6.0
Power Supply
7
7.0
Environment
7
8.0
Physical Dimensions
7
9.0
Optional Accessories
7
10.0
Setup Installation
8
10.1
Unpacking
8
10.2
Site Selection
8
10.3
Installation Checklist
8-9
11.0
Bios Introduction
9
11.1
Bios Setup
9
11.2
Bios Main Menu
10
11.3
Bios Operation
11
11.4
Advanced Bios Features
11
12.0
CPU Configuration
11-12
13.0
IDE Configuration
12
14.0
Super I/O Configuration
12
15.0
Hardware Health Configuration
13
16.0
ACPI Settings
13
16.1
General ACPI Configuration
13
16.2
Advanced ACPI Configuration
13
16.3
Chipset ACPI Configuration
13-14
17.0
AHCI Configuration
14
18.0
APM Configuration
14
19.0
Event Log Configuration
14
20.0
MPS Configuration
15
21.0
Smbios Configuration
15
22.0
USB Configuration
15
M I N T R O N I X C O M P U T E R S O L U T I O N S
124 Old Mill Road, Suite H
Greenville, SC 29607
855-672-6464
Version 1-2018
Page 4
22.1
USB Mass Storage Device
15
23.0
Advanced PCI/PnP Settings
15-16
24.0
Boot Settings Configuration
16-17
25.0
Security
17
26.0
Advanced Chipset Settings-North Bridge
17
26.1
Video Function
17
27.0
Advanced Chipset Settings-South Bridge
18
28.0
Exit Option
18-19
29.0
Jumper Settings
19
30.0
Installing Software & Drivers
20
30.1
Operating Systems
20
30.2
Touch Screen Driver
20
30.3
Video Driver
20
30.4
Audio Driver
20
30.5
Network Driver
20
30.6
Tuning the Touch Screen
20
30.7
Other Applications
21
31.0
Troubleshooting
21
31.1
Initial Inspection
21
31.2
Peripheral Configuration Problems
22
31.3
Connection Problems
22
32.0
Standard IRQ Settings
22
33.0
Optional Magnetic Stripe Reader
23
33.1
Reader Test
23
33.2
Changing Configuration
23
33.3
Power-Up Initialization
23
M I N T R O N I X C O M P U T E R S O L U T I O N S
124 Old Mill Road, Suite H
Greenville, SC 29607
855-672-6464
Version 1-2018
Page 5
1.0 Introduction
The MP5000A/J and MP5000J are all-in-one touch screen computers with low power,
64 bit instruction set & Intel Atom dual core processors. Viewing angle can be adjusted
installed on the metal stand. They can also be wall mounted. MP5000A/J has 12”
800x600 LCD display & MP5000J has 15” 1024x768 LCD display. The flexibility of a PCbased architecture combined with advanced LCD and touch screen technology comes
together to form a low cost, small-sized computer that runs all PC-based software. Its
unique design allows for ease of use with any applications. With networking capability,
this computer is ideal for information kiosk, point of sales, and practically anything one
can imagine.
2.0 Standard Features
Processor
Intel® Atom Dual Core D510 (1.66GHz) or D525
(1.8GHz) CPU, 667MHz or 800MHz front side bus
Bios
AMI 16 Mbit Flash BIOS with data backup to avoid
configuration loss
Memory
Max 4GB, DDR3-800 SODIMM for D525
Max 2GB, DDR2-667 SODIMM for D510
Chipset
Intel® Atom. N455/D525 + ICH8M
Storage Devices
One 2.5” SATA hard disk or Solid State drive. One CF type I/II
slot.
Watchdog Timer
Timer generates system reset at 1 ~ 6 2 second interval.
Software enabled/disabled.
M I N T R O N I X C O M P U T E R S O L U T I O N S
124 Old Mill Road, Suite H
Greenville, SC 29607
855-672-6464
Version 1-2018
Page 6
3.0 Input/Output
Serial
3X, 1 external DB9 (COM1), 2X internal: COM2 for
Touch screen, COM3 supports RS232/422/485
Ethernet
2X RJ45 1000 Mbps. LAN1 Intel® 82567V, LAN2 Intel 82583V.
Compliant with IEEE 802.3, IEEE 802.3u, IEEE 802.3x, IEEE
8023y, IEEE 802.ab
Keyboard/Mouse
Internal connector for PS/2 KB/Mouse support
USB
1 - 3.0 USB, 1 USB 2.0 on rear I/O and 4 internal USB 2.0
PCI Bus
1X internal mini PCIe port for expansion
Parallel Port
1X internal with EPP/ECP support
Audio Port
Internal line-in, line-out and microphone
4.0 Graphics
Display Controller
Intel® Gen 3.5 DX9+ GFX core, up to 224MB shared
VRAM
Display
Supports VGA & LVDS LCD dual displays:
• MP5000A: 12”, 800x600 LCD
• MP5000J: 15” 1024x768 LCD
5.0 Touch Screen
Touch Screen
5 wire resistive technology integrated USB controller,
using mouse emulation
M I N T R O N I X C O M P U T E R S O L U T I O N S
124 Old Mill Road, Suite H
Greenville, SC 29607
855-672-6464
Version 1-2018
Page 7
6.0 Power Supply
Power Supply
Voltage
External power adapter, full range auto sensing
100-240 V, 50-60Hz input, Max. 12V, 5A, 60W output
7.0 Environment
Operating
Temperature
0~40° C
Storage
Temperature
-20~60°C
8.0 Physical Dimensions
Weight
MP5000A: 6.8 lb. without alloy stand, 12 lb. with stand
MP5000J: 9 lb. without alloy stand, 16 lb. with stand
Width
MP5000A/J: 11.5” / 14.25”
Depth
MP5000A/J: 2.5” / 3.0” without stand
Height
MP5000A/J: 8.5” / 10.75” without stand
9.0 Optional Accessories
Magnetic Stripe
Reader
1~3 track HID USB reader
Barcode Scanner
CCD miniature scanner
Loading...