Mintron MHD-61S2S User Manual

Model: MHD-61S2S

1

User Guide

HD-SDI Repeater

GENERAL:

MHD-61S2S is able to extend the HD-SDI signal transmission distance between HD-SDI
devices at data rates up to 1.485Gb/s and be compliant with SMPTE 292M, 296M standards.
In addition, it allows simultaneous signal transmission, camera control (RS-485) and power
over a single cable which is with re-use of coax infrastructure.

FEATURES:

 Support high-definition HD-SDI digital video at 720p60, 1080i60 and 1080p30 formats at

all frame rates.

 HD-SDI standard SMPTE292M, 296M at 1.485Gb/s data rate.
 Integrated cable equalizer for long distance video transmission without loss of quality.
 High quality digital video and audio transmission with near zero latency.
 Re-clocker to resynchronize the signal—bring it back to its original condition.
 Cable Driver to retransmit the signal with its original characteristics restored.
 Support Coaxial-link(C-LINK),

o Cameras and repeaters’ power can be powered by coaxial cable.
o Camera control signal (RS-485) can be transmitted by coaxial cable.

PACKAGE CONTENT

 Main unit(MHD-61S2S) ---------X1
 User manual------------------------X1
 AUX cable--------------------------X1

Model: MHD-61S2S

2

DIMENSION:

I/O INTERFACE:

 HD-SDI out: for connecting HD-camera
 HD-SDI out: for connecting monitor or HD-SDI receiver
 AUX port

Led indicator:
Green on: local powering
Yellow on: power out via to remote device
AUX port cable:
White/orange: Ctrl out(RS-485), to connect the controlled device
White/green: Ctrl in(RS-485), to connect the controller for nearest monitor application
White/blue: DC12~24V, to connect the DC power
White/brown: GND