Mint LED BLOOM Wand Operation Instructions Manual

Operation Instructions

DL Wholesale Inc.

7041 Las Positas Rd Ste A

Livermore CA 94551

www.dlwholesale.com / 510.550.0018

Operation Instructions

5. Warnings

MINT LED fixtures are designed for indoor use only! Do not place the fixture/s,
associated electronics, and/or powered accessories near foggers, misters, or any devices
that produce significant moisture. Do not place equipment in ambient rooms with a humidity
rating greater than or equal to 80%. Use MINT LED fixtures with properly grounded powered
outlets only. Ensure that all MINT LED equipment, including the provided contents, is
undamaged and in proper working order prior to use. MINT LED fixtures should be installed in
a fixed and well secured position only. Ensure the lamps and fixture body receives adequate
ventilation for heat and that the heat vents are not obstructed. Do not stare directly into the
LED diodes when the unit is powered on without proper eye protection.

3. Installation

1. Switch the main power off.

2. Install the fixture into a fixed and secure postion using the provided hardware.

3. Hang the fixture only by its designated mounting points with the provided hardware.

4. Install the provided power cables from the fixture to the provided power supply and
lastly the power supply into a powered outlet. (Inspect all powered wiring for any
damage prior to installation.)

4. Switch the main power on when installation is complete to begin programming and
using your fixture.

1. Contents

A. MINT LED Wand (BLOOM) Fixture (1)
B. Power Supply (1)
C. Power Cord (1)
D. Hanging Hardware (2)
E. Brass Anchors (2)
F. Hanging Brackets (2)

Introduction

Thank you for purchasing the MINT LED BLOOM Wand! Please review the following
instructions to ensure you receive the best performance possible. DL Wholesale is carrying
the LED torch…or should we say WAND! We proudly introduce to you the MINT LED 2' BLOOM
Wand. This 2' LED strip light puts out a versatile spectrum for the flowering stage of your
plant’s life cycle. A lightweight aluminum design makes this light easy to mount, whether you
need lighting for a flowering tent or even supplemental lighting for your grow room.
Containing 13 LED Diodes and drawing just 28 Watts (120/240V) of power, this is the perfect
lighting solution for your home gardens and tent grows. The unique high transmittance lens
guarantees both an outstanding PPFD output and proper lighting coverage! Make your
room MINT condition with MINT LED!