Minox BL10x44HD, BL10x52HD, BL8x52HD, BL8x44HD, BL8x33HD Instruction Manual

Instruction manual

BL 8x33 HD
BL 8 x44 HD · BL 10 x44 HD
BL 8 x52 HD · BL 10 x52 HD

BL 8 x56 HD

Operating parts

1. Eyepieces with adjustable eyecups

2. Diopter compensation

3. Central drive

4. Collapsible tubes

5. Lens

6. Tripod adapter (Cover screw)

With these binoculars from MINOX you have chosen a pro­duct of highest optical quality and mechanical precision.
The MINOX BL-HD binoculars were developed, engineered
and assembled in Germany, giving them the "Made in
Germany" seal of approval.

These instructions are to help you benefit from the full per­formance spectrum of your MINOX binoculars.

We wish you much pleasure and enjoyment
with your new MINOX BL-HD binoculars!

Introduction

1

2

3

4

65

Adjustments

Ideal for people wearing glasses

To ensure that people wearing glasses also have an optimal
field of view MINOX binoculars are fitted with rotating
eyecups.

For use without wearing glasses

Those who do not wear glasses must turn the eyecups at
both eyepieces in counterclockwise direction until they
engage in the extended position. The binoculars are now
set at the correct distance to the eyes.

For use with glasses

Those who wear glasses must leave the rotating eyecups on
both eyepieces in the original position (as delivered) or, if
necessary, turn the eyecups in clockwise direction until they
noticeably engage. In this setting you can enjoy the entire
field of view without disturbing interference at the edges.

The right distance between the eyes
(inter-pupillary distance)

Look into the eyepieces of your binoculars and adjust the
angle of the hinged tubes until you have a singular circular
viewing field from both fields of view.