MINOLTA-QMS Magicolor 3100 Maintance Manual
®
magicolor 3100
Maintenance
Guide
1800657-001B
Dear magicolor 3100 Series Printer User:
Thank you for purchasing a magicolor 3100 Series printer. Place this
near the printer for quick information.
Guide
For technical support:
click on On-line Help & Drivers. The Answer Base (the dancing sun icon) helps you
locate the information you need by asking you questions. You can also refer to the
Installation Guide
Dispose of used consumables properly according to your local regulations.
Do not dispose of them by burning.
Keep dry
The fuser can become extremely hot and cause severe burns. Make sure the unit is
cool before handling it.
Point your web browser to www.minolta-qms.com, and then
and the
User’s Guide
for further information.
Maintenance
Trademarks
The following are registered trademarks of MINOLTA-QMS, Inc.: QMS, the
MINOLTA-QMS logo, Crown, and magicolor.
Minolta is a trademark of Minolta Co., Ltd. Other product names mentioned in this
guide may also be trademarks or registered trademarks of their respective owners.
Proprietary Statement
The digitally encoded software included with your printer is Copyrighted © 2001 by
MINOLTA-QMS, Inc. All Rights Reserved. This software may not be reproduced,
modified, displayed, transferred, or copied in any form or in any manner or on any
media, in whole or in part, without the express written permission of MINOLTAQMS, Inc.
Copyright Notice
This guide is Copyrighted © 2001 by MINOLTA-QMS, Inc., One Magnum Pass,
Mobile, AL 36618. All Rights Reserved. This document may not be copied, in whole
or part, nor transferred to any other media or language, without written permission
of MINOLTA-QMS, Inc.
Notice
MINOLTA-QMS, Inc. reserves the right to make changes to this guide and to the
equipment described herein without notice. Considerable effort has been made to
ensure that this guide is free of inaccuracies and omissions. However, MINOLTAQMS, Inc. makes no warranty of any kind including, but not limited to, any implied
warranties of merchantability and fitness for a particular purpose with regard to this
guide. MINOLTA-QMS, Inc. assumes no responsibility for, or liability for, errors
contained in this guide or for incidental, special, or consequential damages arising
out of the furnishing of this guide, or the use of this guide in operating the
equipment, or in connection with the performance of the equipment when so
operated.
Media Specifications
All media is fed short edge first and is output to the 250-sheet output tray
on top of the printer. The imageable (printable) area for all media sizes is
the page size minus 0.157" (4 mm) from all edges.
Media Inches Millimeters Source* Autoduplex
A4
A4
Transparency
A5
B5 (ISO)
B5 (JIS)
C5
C6
Commercial
#10 Envelope
International
DL Envelope
Executive
Folio
Japanese
Postcard
Legal
Letter
Letter
Transparency
Monarch
Statement
Notes:
* U = Upper, M = Multipurpose (MPT), H = High-capacity input feeder.
Thick 3 media can be printed only from the multipurpose tray.
For job modes (such as network user), print quality (such as draft), media type
(such as plain paper), and further information, refer to the
8.2 x 11.7 210.0 x 297.0 U/M/H Yes
8.2 x 11.7 210.0 x 297.0 U/M/H No
5.9 x 8.3 149.0 x 210.0 U/M/H Yes
6.9 x 9.8 176.0 x 250.0 M No
7.2 x 10.1 182.0 x 257.0 U/M/H Yes
6.4 x 9.0 162.0 x 229.0 M No
4.5 x 6.4 114.0 x 162.0 M No
4.1 x 9.5 105.0 x 241.3 M No
4.3 x 8.7 110.0 x 220.0 M No
7.3 x 10.5 184.0 x 267.0 U/M/H Yes
8.5 x 13.0 215.9 x 330.2 U/M/H Yes
3.9 x 5.8 100.0 x 148.0 M No
8.5 x 14.0 215.9 x 355.6 U/M/H Yes
8.5 x 11.0 215.9 x 279.4 U/M/H Yes
8.5 x 11.0 215.9 x 279.4 U/M/H No
3.9 x 7.5 98.0 x 191.0 M No
5.5 x 8.5 140.0 x 216.0 M Yes
User’s Guide
.
1
Loading Media
2
1
3
4
A5
5
A5
2
6
5
7
8
8
7
9
10
12
11
13
3
Clearing Media Jams
8
6
1
1 2
3 4
13
9
12
2
5
16
5
6
5555
4444
A
4
7 8
9
10
11 12
13 14
5555
4444
5
H
5555
B
4444
15 16
Maintenance Schedule
Attention
Consumable life is expressed in simplex letter/A4 pages at
normal 5% coverage in continuous printing. A duplex page is
equivalent to two simplex pages. The stated life expectancy of
each consumable is based on printing under specific operating
conditions, such as ratio of color to monochrome, and media
type and size. The actual life expectancy will vary (or be
reduced) depending on these and other printing variables,
including continuous (optimal consumable life) or intermittent
(for example, one-page jobs) printing, ambient temperature,
and humidity.
User
replaces...
Fuser unit
Imaging unit
Toner
cartridge
Transfer unit
After this message displays in the message window...
REPLACE FUSER UNIT
Replace both the fuser and the media feed roller(s).
REPLACE IMAGING UNIT
<
COLOR
> TONER EMPTY
REPLACE TRANSFER UNIT
6
Loading...