Minolta Pageworks 18 User Manual
PageWorks 18
Contents
Step 1
Reference 1
Reference 2
Step 2
Step 3
Step 4
Step 5
Step 6
Step 7
Unpacking the Printer.....................1
Printer Parts..................................... 3
Control Panel ................................... 4
Attaching the Face-Down Tray
and Tray 1......................................... 5
Loading Paper.................................. 7
Connecting the Power Cord ...........8
Turning the Power On/Off............... 8
Printing a Configuration Page........9
Connecting the Printer to the
Computer (Local Connection)...... 10
Step 8
Reference 3
Installing the Printer Driver ..........11
Troubleshooting ............................ 15
Unpacking the Printer
Step 1
Before operating your printer, read the Set-Up Instructions
carefully from cover to cover. Use this guide for reference.
1.Face-down tray
2.Printer
1
2
3.Accessories
User’s Manual
Quick Guide
Warranty card
3
Registration card
CD-ROM
Power cord
4.Tray 1
4
Take the items and accessories shown above out of the carton.
1.
Remove the plastic bag and peel off the shipping tape from the printer.
2.
1
Pull out the plastic-lead strip from the paper feed inlet.
3.
Remove the tape strip from the back of the printer.
4.
Step 1
2
Printer Parts
Reference 1
Control panel
Face-down tray
Paper size guide
Manual feed tray
Tray cover
Top cover release
button
Power switch
Paper size guide
Tray 1
(multipurpose tray)
Parallel interface
connector
Power cord socket
Imaging
cartridge
3
Control Panel
Reference 2
The control panel has three indicator lights and one button.
READY indicator (green)
PAPER indicator (amber)
ERROR indicator (red)
Panel button
Printer is ready. Receiving data via
parallel interface;
printing in progress.
The printer is
waiting for paper to
be loaded
manually.
Paper misfeed.
Clear the paper
misfeed to
continue printing.
(Slow blinking)
Pow er save mode.
Cover open. Close
the cover.
Pow e r is off.
Out of paper. Load
more paper to
continue printing.
Memory overflow/
data received cannot
be processed
because it is too
complex.
4
Attaching the Face-Down Tray
Step 2
and Tray 1
With both hands, gently bend the face-down tray inwards and insert one of
1.
its tabs into its holder on the upper portion of the printer. Continue to bend
the face-down tray so that it curves enough for the second tab to fit into its
holder and release the tray into position.
Note
• Be sure to close the face-down tray before opening the top cover to prevent
injuries.
5
Loading...