Page 1
IPX Peer-to-Peer Printing
for Windows 95/98
This program installs a redirector onto your Windows-based
system. This redirector will allow you to see the print servers
as local printers when choosing to direct a printer driver to a
PORT.
The PORT uses the print server's name which defaults to:
AAA_###### (where the A's are the three-letter identifier for
the unit and #'s represent the NIC's six-digit serial number).
The redirector will only work across an IPX network, for
example, Novell, but the program does not require a Novell
server. If you do not have an IPX connection, this program
will not function.
Click here to start the IPX Redirector installation program.
Cancel
Page 2
IP/IPX MAP Utility
for Windows 95/98/2000 & NT 4.0
This program installs the IP/IPX Management Access
Program (MAP) onto your Windows-based system. MAP will
allow you to find and configure the print servers on your IPX
and/or IP-based network.
MAP will identify IPX printers based on the print server's
name which defaults to: AAA_###### (where A's are the
three-letter identifier for the unit and the #'s represent the
NIC's six-digit serial number).
MAP will identify IP printers based on the print server's IP
address in the form of XXX.XXX.XXX.XXX (where X's
represent the numerical IP address).
Click here to start the IP/IPX MAP installation program.
Cancel
Page 3
IP Peer-to-Peer Printing
for Windows 95/98/2000 & NT 4.0
This program installs a redirector onto your Windows-based
system. This redirector allows you to see the print servers
as local printers when choosing to direct a printer driver to a
PORT. The print server's IP address will be in the form of
XXX.XXX.XXX.XXX where the X's represent the numerical
IP address.
The redirector will only work across an IP network
connection. If you do not have an IP connection, this
program will not function.
Click here to start the IP Redirector installation program.
Cancel
Page 4
NWSetup Utility
for Windows 95/98/2000 & NT 4.0
This program installs a utility onto your Windows-based
system, which allows you to setup the printer on a Novell
NetWare network with one easy interface.
This program will configure the NIC options and set-up a
Fileserver and Queue on the NetWare Server.
You must be logged in to the Novell NetWare server with
Administrator access to use this program.
This program will only work on an IPX Novell NetWare
network. If you do not have an IPX Novell connection, this
program will NOT function.
Click here to start the NWSetup installation program.
Cancel
Page 5
NIManage
for AppleTalk Administration Program
You can configure the NIManage AppleTalk Administration
Program from this screen, but it is recommended that you
move the program from the CD to a folder on your
Macintosh.
To move the program from the CD, exit this program
and click on the CD icon. Find the folder labeled
APPLTLK and click on that folder twice. Move the
contents of the APPLTLK folder to a folder on your
Macintosh. It is recommended that you label the
folder PRINTSERVER or NIMANAGE to identify the
program.
Click here to start the NIManage administration program.
Cancel
Cancel
Page 6
TCP/IP Programs
for Unix
See the README file in the UNIX directory for information.
You cannot run this program from here. You need to do the
following
1. Login as a superuser.
2. Go to or create a directory in which you want to install
TCP/IP software. For example:
cd / usr/my_install
3. Use the tar command to load the software.
Type: tar –xvf /cdrom/unix/tcputils.tar
It is recommended that you print these instructions.
Cancel
Page 7
BootP Lite32 Utility
for Windows 95/98/2000 & NT 4.0
You must copy/install this program from the Explorer/File
Manager window of your computer.
BOOTPL32 is located in the BOOTP directory of the CD.
BootPL32 is for use with 32-bit systems such as
Windows 95/98/2000 and Windows NT 4.0.
To Install:
Copy the files to your hard drive in your Windows directory.
You can then run the program using the RUN command in
Windows or using Explorer to double-click on the icon.
Cancel
Loading...