7664-1179--11
PageScope Light
Fiery Z4/X3e for CF9001
Operator´s Manual
Foreword
Welcome
PageScope Light Fiery Z4/X3e for CF9001 is a device control utility
program provided by the HTTP server built into the Fiery Z4/X3e
(printer controller for CF9001). With a standard Web browser, this
utility can be used as an interface for remote control of the CF9001.
Trademark Acknowledgements
Minolta is a registered trademark of MINOLTA CO., LTD.
Apple and Macintosh are registered trademarks of Apple Computer,
Inc.
Ethernet is a registered trademark of Xerox Corporation.
Fiery and the Fiery logo are registered trademarks of Electronics for
Imaging, Inc. Fiery WebTools is a trademark of Electronics for
Imaging, Inc.
Linux is a registered trademark of Linus Torvalds.
Microsoft, Windows, and Windows NT are registered trademarks of
Microsoft Corporation.
Netscape Communications, the Netscape Communications logo,
Netscape Navigator, Netscape Communicator, and Netscape are
trademarks of Netscape Communications Corporation.
PostScript is a registered trademark of Adobe Systems, Inc.
Solaris is a trademark of Sun Microsystems, Inc.
All other product names are trademarks or registered trademarks of
their respective holders.
Copyright 2000 MINOLTA CO., LTD.
The information contained in this manual is subject to change
without notice to incorporate improvements made on the product
or products the manual covers.
i
Contents
CONTENTS
1 System Requirements
2 Access
2.1 Operation ...........................................................2
....................................................................2
3 Screen Configuration
4 System Tab
4.1 Summary ...........................................................5
4.2 Details ................................................................6
4.2.1 Input Tray .................................................6
4.2.2 Output Tray ..............................................7
4.2.3 Hard Disk Status ......................................8
4.2.4 ROM Version ............................................9
............................................................5
.......................................1
........................................3
4.2.5 Interface Information .............................10
4.2.6 Consumable Status ...............................11
4.3 Preference .......................................................12
4.4 Online Assistance ...........................................13
ii
Contents
5Printer Tab
5.1 Printer Front Panel ..........................................15
5.2 Test Print ..........................................................16
5.3 PostScript Font ...............................................17
...........................................................15
Appendix Status List ...................................
18
iii
1 System Requirements
1 System Requirements
The following items are required to use this utility.
Computer
• Software
Operating System Web Browser
Windows 95/98/NT 4.0/2000 Internet Explorer 3.02 or higher
Netscape Navigator 3 or higher
Macintosh System 7 or higher Internet Explorer 4.5 or higher
Netscape Navigator 4 or higher
Solaris 2.5.1/2.6/7 (2.7) Netscape Navigator 4 or higher
Linux Netscape Navigator 4 or higher
• NIC (Network Interface Card)
• Ethernet or Token Ring
• TCP/IP Protocol
CF9001
Printer Controller
• Fiery Z4 for CF9001 (external) or Fiery X3e for CF9001 (builtin)
1
2 Access
2 Access
PageScope Light Fiery Z4/X3e for CF9001 can be accessed directly
from a Web browser.
1. Start the Web browser.
2. In the URL field, enter the IP address of the printer controller as
shown below.
http://
(Example) When the IP address of the printer controller is
192.9.200.200:
http://192.9.200.200/
3. This causes the PageScope Light Fiery Z4/X3e for CF9001 screen
to appear.
<IP address of printer controller>
/
2.1 Operation
PageScope Light Fiery Z4/X3e for CF9001 operation is identical to
that for Internet Web pages. Clicking a hot link jumps to the link
destination, and the
backwards and forward.
Back
and
Forward
buttons scroll through pages
2
3 Screen Configuration
3 Screen Configuration
The configuration of the PageScope Light Fiery Z4/X3e for CF9001
screen is shown below.
Note
• Screen images shown in this manual may differ slightly from actual
ones. In addition, specifications are subject to change without prior
notice.
➁➁➁➁
➀➀➀➀
➃➃➃➃
➂➂➂➂
➄➄➄➄
➅➅➅➅
➀ Minolta PageScope Light Logo
Clicking the logo jumps to the Website shown below.
www.minolta.com
➁ Status Display
The current status of the CF9001 is indicated by both icons and
text. The message
the CF9001 is operating normally. For full details about screen
contents, see Appendix – Status List.
Ready
appears in the top line of text when
3
3 Screen Configuration
➂ Tabs
Use the tabs to select the category of items you want to display.
For full details about tab contents, see 4 – System Tab and
5 – Printer Tab.
➃ Menus
Use the menus to select information or setting items. The
menus that appear depend on the currently selected tab.
For full details about menu contents, see 4 – System Tab and
5 – Printer Tab.
➄ Information and Settings Display
This display shows information or settings in accordance with
the selected menu item.
➅ Fiery WebTools Logo
Clicking this logo displays the settings page for Fiery
WebTools, which is built in to the printer controller. For details
about Fiery WebTools, see the
Fiery Z4/X3e Operator’s Guide
.
4
4 System Tab
4 System Tab
The
System
system configuration.
tab shows information about and settings for the CF9001
4.1 Summary
This screen is the initial screen when you access http://<IP address of
printer controller> with your Web browser. You can also display the
Summary screen by clicking the
The Summary screen shows the current CF9001 system configuration.
Summary
menu on the
System
tab.
Device Status This area uses graphics and text to shows the
configuration of options installed on the CF9001.
Operational Panel Display
This area shows the printer controller message
display. Messages are the same as the Status
Display messages that appear in the upper part of
the window.
5
4 System Tab
Configuration Summary
4.2 Details
This area shows an overview of the current
CF9001 system configuration.
This screen appears when you click the
tab. It shows details about each of the CF9001’s units. Clicking a submenu under the
applicable unit.
Details
menu displays information about the
Details
menu on the
System
4.2.1 Input Tray
This screen appears when you click the
Details
on the CF9001.
menu. It shows the configuration of all the Input T rays installed
Input Tray
sub-menu under the
Tray Tray name
Paper Size Size of paper loaded in the tray
Media Type Type of media loaded in the tray
Orientation Orientation of paper loaded in the tray
6
4 System Tab
Capacity Maximum number of sheets that can be loaded in
the tray
Paper Remaining paper status (Shows
paper is present, and
Empty when there is no
Ready when
paper left.)
4.2.2 Output Tray
This screen appears when you click the Output Tray sub-menu under
the
Details menu. It shows the configuration of all the Output Trays
installed on the CF9001.
Tray Tray name
Capacity Maximum number of sheets the tray can hold
Paper Tray status (Shows
receive an y more paper, and
Full when the tray is unable to
Ready when it is.)
7
4 System Tab
4.2.3 Hard Disk Status
This screen appears when you click the
Details
printer controller.
menu. It shows the status of the hard disk installed on the
Usage Percent of hard disk space used (%)
Used Amount of hard disk space used (KB)
Free Amount of hard disk space free (KB)
Hard Disk
sub-menu under the
8
4.2.4 ROM Version
4 System Tab
This screen appears when you click the
the
Details
the CF9001 and the printer controller.
menu. It shows information about the on-board memory of
Copier Version of ROM installed on the CF9001
Printer Controller
Version of firmware installed on the printer
controller
ROM Version
sub-menu under
PDL Info Version of printer control codes (PostScript) used
by the printer controller
9
4 System Tab
4.2.5 Interface Information
This screen appears when you click the
the
Details
interface.
menu. It shows information about the printer controller
Network I/F Network interface type (Ethernet 10/100BaseT or
Token Ring)
Local I/F Local port type
Interface Info
sub-menu under
10
4.2.6 Consumable Status
4 System Tab
This screen appears when you click the
the
Details
For information about consumables, see the
menu. It shows the current status of CF9001 consumables.
Black Toner Remaining black toner
Yellow Toner Remaining yellow toner
Magenta Toner Remaining magenta toner
Consumable
sub-menu under
CF9001 Operator’s Manual.
Cyan Toner Remaining cyan toner
Waste Toner Remaining waste toner bottle capacity
Staple Remaining staples
Fuser Oil Remaining oil in fuser web unit
11
4 System Tab
4.3 Preference
This screen appears when you click the
tab. It lets you make changes to the PageScope Light environment.
Password Type in the password here when a password is
defined. Note that the password is case-sensiti ve,
so be sure to type in upper-case and lower-case
characters correctly. (The password you should
type in here is the same as the administrator
password you created for Fiery WebTools.)
Preference
menu on the
System
Refresh Rate Type in a value to specify the number of seconds
between screen refreshes. You can input a value
from 30 to 300 seconds. The default setting is 60
seconds.
Language Select the screen language you want to use for
PageScope Light.
• English
• German
• French
• Italian
• Spanish
12
4 System Tab
Apply Button Click this button to apply any settings you have
input or selected up to this point.
Clear Button Click this button to cancel any settings you have
input or selected up to this point.
Note
• The message
wrong password. If this happens, click your W eb bro wser’ s
to return to the previous page and configure your preferences again.
Invalid Password
appears on the screen if you input the
Back
4.4 Online Assistance
button
This screen appears when you click the
the
System
tab. It shows information and lets you make settings
Online Assistance
related to product support.
Password Type in the password here when a password is
defined. Note that the password is case-sensiti ve,
so be sure to type in upper-case and lower-case
characters correctly. (The password you should
type in here is the same as the administrator
password you created with Fiery WebTools.)
menu on
13
4 System Tab
Contact Type in the name of your product support counter.
Contact Tel Number
Type in the phone number of your product support
counter .
Product Help URL
Type in the URL of your product information
Website. Clicking the
to the Website you specify here.
Minolta Corporate URL
Type in the URL to the Minolta home page.
Clicking the
Minolta Corporate URL jumps to the
Website you specify here.
Tel Number for Supplies and Accessories
Type in the telephone number of the support
counter you need to contact to order consumables
and accessories.
Apply Button Click this button to apply any settings you hav e
input up to this point.
Product Help URL jumps
Clear Button Click this button to cancel any settings you have
input up to this point.
Note
• The message
wrong password. If this happens, click your Web browser’s
button to return to the previous page and configure your online
assistance settings again.
Invalid Password
appears on the screen if you input the
14
Back
5Printer Tab
5 Printer Tab
The
Printer
CF9001.
tab shows information and settings for printing on the
5.1 Printer Front Panel
This screen appears when you click the
the
Printer
controller’s operational panel.
tab. It provides on-screen emulation of the printer
Operational Panel
menu on
Display This area shows the printer controller message
display. Messages are the same as the Status
Display messages that appear in the upper part of
the window.
Online Button Toggles the printer controller network connection
on line and off line
15
5 Printer Tab
5.2 Test Print
This screen appears when you click the
tab. It lets you select a test print page and execute a test print
operation.
Config Page Insert a check mark into the box to print the printer
controller setup page.
PostScript Demo Page
Insert a check mark into the box to print the
PostScript demo page.
Test Print
menu on the
Printer
PostScript Font List
Insert a check mark into the box to print the
PostScript font list.
Color Chart Insert a check mark into the box to print the color
chart.
Print Button Click this button to execute a test print operation.
16
5.3 PostScript Font
5 Printer Tab
This screen appears when you click the
tab. It shows a list of PostScript fonts built into the printer controller.
The names of fonts downloaded to the printer controller from the
computer are added to the bottom of the list.
Font Name Font name
Location Storage location of the font (ROM, RAM, HDD)
Font Info
menu on the
Printer
17
Appendix Status List
Appendix Status List
The current CF9001 status is indicated by an icon in the upper part of
the window, and by text next to the icon in the upper text area. More
detailed messages appear in the lower text area. The contents of the list
are arranged in order of importance (most critical first).
Icon
Status
(Upper Text)
Fatal Controller Malfunction
Error Cover Open
Attention Off Line Connection to printer
Details (Lower Text) Description
Parts Missing Consumable is not
installed correctly.
Paper Jam
Remainder Paper Paper was left in
electronic document
handler or scanner after
completion of job.
Paper Empty Paper tray is empty.
Life o f Parts Consumable is depleted.
Paper Capacity Over Capacity of output tray
was exceeded.
(Blank) Unidentified error.
controller network is
offline.
Scanner Busy
Option Parts Malfunction
Life of Parts Consumable is
depleted.
Near Life of Parts Consumable is nearing
depletion.
18
Appendix Status List
Icon
Status
(Upper Text)
Ready Warming Up
Details (Lower Text) Description
Power Save The machine is in
Processing
(Blank) The machine is ready.
power save mode.
19
2000. 11
Copyright
2000 MINOLTA CO., LTD.
The information contained in this manual is
subject to change without notice to
incorporate improvements made on the
product or products the manual covers.
MINOLTA CO., LTD.
Image Information Products Marketing Headquarters
3-13, 2-chome, Azuchi-machi, Chuo-ku, Osaka. 541-8556, Japan
Loading...