Minolta Di 152, Di 183 Disassembly Position of Scanner
FrameMaker Ver.5.5E(PC) DIS/REASSEMBLY, ADJUSTMENT FOR Di152/Di183
01.09.03
4-5. OTHER ADJUSTMENTS
(1) Adjustment of the Position of the Scanner and 2nd/3rd Mirrors Carriage
1. Fit the Scanner/Mirrors Carriage Positioning Jigs
Rear
4022D013AA
in the space between the Scanner and the 2nd/
3rd Mirrors Carriage.
2nd/3rd Mirrors Carriage
Jig
Rear
Adjusting
Screw
Fixing Screw
Scanner
Jigs
2. Press the 2nd/3rd Mirrors Carriage tightly up
against the jigs.
Jig
4022D014AA
3. Loosen the set screw of the cable holding plate
and turn the adjusting screw as necessary to
eliminate clearance between the 2nd/3rd Mirrors
Carriage and the Scanner/Mirrors Carriage Positioning Jigs.
4022D015AB
4. Press the Scanner tightly up against the jigs and
tighten the set screw of the cable holding plate to
the specified torque.
4022D016AA
D-64
Loading...