Minolta Di 152, Di 183 Trouble Void areas

FrameMaker Ver.5.5E(PC) Di152/Di183 TROUBLESHOOTING

01.09.04

(8) Void areas

Section Step Check Result Action
Output

system

1 Foreign matter is present along the

paper path.

2 Paper dust plugs up the Paper Dust

Remover.

3 PC Drum Charge Corona, grid mesh,

and Comb Electrode are loose.

4 PC Drum Charge Corona contact is

dirty, scratchy, deformed, worn, or dam­aged.

5 Developing Roller is dirty, scratchy,

deformed, worn, or damaged.

6 Toner is even on Sleeve/Magnet Roller. NO • Adjust DB.

7 Developer is not even in the Developer

Mixing Chamber of IU.

8 DB of IU is plugged with foreign matter

(such as paper dust).

9 Image Transfer Roller is dirty, scratchy,

deformed, worn, or damaged.

10 Image Transfer Roller Assy is installed

correctly.

11 Charge Neutralizing Plate is dirty,

scratchy, folded, or bent.

12 Left Fusing Roller is dirty, scratchy,

deformed, or worn.

YES • Rem ove foreign matter.

YES • Clean or change.

YES • Reinstall.

YES • Clean, correct, or

change.

YES • Clean or change.

For details, see DIS/
REASSEMBLY,
ADJUSTMENT.

YES • Even out developer in

the Developer Mixing
Chamber.

YES • Rem ove foreign matter.

YES • Clean, correct, or

change.

NO • Reinstall.

YES • Clean, correct, or

change.

YES • Clean or change.

NO • Change IU.

T-54