Page 1
EPI 054/EP1085/EP2030
I
GENERAL
MINOLTA
Page 2
COTNENTS
1. SPECIFICATIONS
l-l.
Specifications of EP2030 . . . ..__.........._....................................................... G-l
l-2.
Specifications of EP1085 . . . . . . . . . .._............................................................. G-4
l-3. Specifications of
2. PRECAUTIONS FOR INSTALLATION . . . . .._._................................................... G-l 0
3.
PRECAUTIONS FOR USE
4.
HANDLING OF THE CONSUMABLES
5.
SYSTEM OPTIONS . . ..___.._.......___..................................................................... G-13
5-l.
System Options of EP2030 . . . ..__............_.................................................. G-13
5-2. System Options of EP1085 . . . . .._...........__.................................................. G-14
5-3.
System Options of EP1054 . . . . . . . . . . . . . . . . ..__.................................................. G-l 4
.__........._..............................................................................
EP1054 _._.........__...........................................................
.._.__..........._............................................................
. . . . . . . . .._..._............................................ G-12
G-l
G-7
G-l 1
Page 3
FrameMaker Ver.5.5(PC) EP1054/EP1085/EP2030 GENERAL
98.04.24
1174SBG0100A
1 SPECIFICATIONS
1174SBG0101A
1-1. Specifications of EP2030
TYPE : Desktop
PHOTOCONDUCTOR : Organic Photoconductor
COPYING SYSTEM : Electrostatic Indi rect Image Transfer to Pl ai n Paper
PAPER FEEDING
SYSTEM
EXPOSURE SYSTEM : Mirror Scanning , Slit Exposur e
DEVELOPING SYSTEM : Minolta New Micro-Toning System
CHARGING SYSTEM : Comb Electrode DC Negative Corona with Scorotron Sys-
IMAGE TRANSFER
SYSTEM
PAPER SEPARATING
SYSTEM
FUSING SYSTEM : Heat Roller
PAPER DISCHARGING
SYSTEM
MAXIMUM ORIGINAL
SIZE
COPY MEDIUM
Plain paper
(60 to 90 g/m²)
Translucent paper – –
Transparencies – –
Medium
Thick pap er
(91 to 157 g/m²)
Recycled paper
Maximum
(Width × Length)
Minimum
(Width × Length)
Dimensions
: Permissible
❍
: Not permissible
–
: 3-Way Feeding 1st Drawer: Universa l Tray
2nd Drawer: Fixed Paper Size Tray
Multi Bypass Table
tem
: Visible Image Transfer by means of a Single-Wire DC
Negative Corona with Corotron System
: AC Corona with Corotron System, plus
Paper Separator Finger
: Charge Neutralizing Brush
: Metric-A3L; Inch-11” × 17”L (L: Length w ise)
1st Drawer
(Automatic
feeding)
❍❍❍
––
❍❍❍
297 × 432 mm 297 × 432 mm 297 × 432 mm
140 × 182 mm 140 × 182 mm 100 × 140 mm
2nd Draw er
(Automatic
feeding)
(250 sheets of paper)
(250 sheets of paper)
Multi Bypass Table
❍
❍
❍
G-1
Page 4
FrameMaker Ver.5.5(PC) EP1054/EP1085/EP2030 GENERAL, MECHANICAL/ELECTRICAL
98.04.24
MULTIPLE COPIES : 1 to 99
WARMING-UP TIME : 30 sec. or less with room temperature of 23°C and rated
power voltage
FIRST COPY TIME : A4C or 8-1/2”
CONTINUOUS COPY SPEED (copies/min.): Fed from 1st Drawer
Area
Size Size
Metric
L: Lengthwise; C: Crosswise
ZOOM RATIOS
Fixed
V ariable ×0.500 to ×2.000 (in 0.001 increments)
Zoom Ratio
A3L
A4L
A4C
B4L
Mode
(in Full size Mode using 1st Drawer)
1.00 Area
×
13
17
23
13
Full Size
Reduction
Enlargement
11”C: 7.2 sec. or less
×
Inch
Area
×
×
×
×
×
×
×
Zoom Ratio
11” × 17” (L)
8-1/2” × 11” (L)
8-1/2” × 11” (C)
5-1/2” × 8-1/2” (L)
Metric Inch
1.000
0.816
0.707
0.500
1.154
1.414
2.000
1.000
×
0.785
×
0.647
×
0.500
×
1.214
×
1.294
×
2.000
×
×
1.00
13
17
23
21
LENS : Through Lens (F = 8.0, f = 180 mm)
EXPOSURE LAMP : Halogen Frost Tube Lamp
FUSING
TEMPERATURE
:195°C
G-2
Page 5
FrameMaker Ver.5.5(PC) EP1054/EP1085/EP2030 GENERAL
98.04.24
POWER/CURRENT CONSUMPTION (Copier Only)
Fusing
Heater
Lamp
(Rating)
115–120V
900W
115–120V
900W
115–120V
900W
220–240V
900W
Max. Power
Consumption
1180W 935W
1220W 965W
1220–1290W 965–1070W
1195–1270W 930–1060W
Voltage
115V
120V
120–127V
220–240V
Exposure
Lamp
(Rating)
80V
225W
80V
225W
80V
225W
160V
240W
In Standby
POWER
REQUIREMENTS
ENVIRONMENTAL CONDITIONS
Temperature 10 to 30°C with a flu ct uation of 10°C or less per hour
Humidity 15 to 8 5% RH with a fluctuation of 10% RH or less per hour
Ambient Ill umi nation 3,000 lux or less
Levelness 1° (1.75 mm/100 mm)
DIMENSIONS
(Copier Only)
WEIGHT : 57 kg (12 5-3/4 lbs)
: 115 V, 120 V, 120
: Width .... 650 mm (25-1/2”)
Depth .... 658 mm (26”)
Height ... 481 mm (19”)(including Original Cover)
127 V, 220–240 V; 50/60 Hz
–
G-3
Page 6
FrameMaker Ver.5.5(PC) EP1054/EP1085/EP2030 GENERAL, MECHANICAL/ELECTRICAL
98.04.24
1174SBG0102A
1-2. Specifications of EP1085
TYPE : Desktop (with Stationary Platen)
PHOTOCONDUCTOR : Organic Photoconductor
COPYING SYSTEM : Electrostatic Indirect Image Transfer to Pl ain Paper
PAPER FEEDING
SYSTEM
EXPOSURE SYSTEM : Mirror Scanning, Slit Exposure
DEVELOPING SYSTEM : Minolta New Micro-Toning System
CHARGING SYSTEM : Comb Electrode DC Negative Corona with Scorotron Sys-
IMAGE TRANSFER
SYSTEM
PAPER SEPARATING
SYSTEM
FUSING SYSTEM :
PAPER DISCHARGING
SYSTEM
MAXIMUM ORIGINAL
SIZE
: 2-Way Feeding Paper Drawer: Universal Tray
(250 sheets of paper)
Manual Bypass Table
tem
: Visible Image Transfer by means of a Si ngl e-Wi re DC Neg -
ative Corona with Corotron System
: AC Corona with Corotron System, plus Paper Separator
Finger
Heat Roller
: Charge Neutralizing Brush
: Metric-A3L; Inch-11” × 17”L (L: Length w ise)
COPY MEDIUM
(60 to 90 g/m²)
Translucent paper –
Transparencies –
Medium
(91 to 157 g/m²)
Recycled paper
(Width × Length)
(Width × Length)
Dimensions
: Permissible
❍
Plain paper
Thick pap er
Maximum
Minimum
: Not permissible
–
Paper Drawer
(Automatic feeding)
❍❍
–
❍❍
297 × 432 mm 297 × 432 mm
140 × 182 mm 100 × 140 mm
Manual Bypass
(Single-sheet feeding)
❍
❍
❍
G-4
Page 7
FrameMaker Ver.5.5(PC) EP1054/EP1085/EP2030 GENERAL
98.04.24
MULTIPLE COPIES : 1 to 99
WARMING-UP TIME : 30 sec. or less with room temperature of 23°C and rated
power voltage
FIRST COPY TIME : A4C or 8-1/2”
CONTINUOUS COPY SPEED (copies/min.): Fed from 1st Drawer
Area
Size Size
Metric
L: Lengthwise; C: Crosswise
ZOOM RATIOS
Fixed
V ariable 50% to 200% (in 1% increme nts)
Zoom Ratio
A3L
A4L
A4C
B4L
Mode
(in Full size Mode using 1st Drawer)
1.00 Area
×
12
16
18
13
Full Size 100% 100%
Reduction
Enlargement
11”C: 7. 2 s e c . or le s s
×
Inch
Area
Zoom Ratio
11” × 17” (L)
8-1/2” × 11” (L)
8-1/2” × 11” (C)
5-1/2” × 8-1/2” (L)
Metric Inch
81%
70%
50%
115%
141%
200%
78%
64%
50%
121%
129%
200%
×
1.00
11
16
18
18
LENS : Through Lens (F = 8.0, f = 180 mm)
EXPOSURE LAMP : Halogen Frost Tube Lamp
FUSING
TEMPERATURE
:195°C
G-5
Page 8
FrameMaker Ver.5.5(PC) EP1054/EP1085/EP2030 GENERAL, MECHANICAL/ELECTRICAL
98.04.24
POWER/CURRENT CONSUMPTION (Copier Only)
Fusing
Heater
Lamp
(Rating)
115–120V
900W
115–120V
900W
115–120V
900W
220–240V
900W
Max. Power
Consumption
1180W 935W
1220W 965W
1220–1290W 965–1070W
1195–1270W 930–1060W
In Standby
Voltage
115V
120V
120–127V
220–240V
Exposure
Lamp
(Rating)
80V
225W
80V
225W
80V
225W
160V
240W
POWER
REQUIREMENTS
ENVIRONMENTAL CONDITIONS
Temperature 10 to 30°C with a flu ct uation of 10°C or less per hour
Humidity 15 to 8 5% RH with a fluctuation of 10% RH or less per hour
Ambient Ill umi nation 3,000 lux or less
Levelness 1° (1.75 mm/100 mm)
DIMENSIONS
(Copier Only)
WEIGHT : 50 kg (110-1/4 l bs )
: 115 V, 120 V, 120
: Width .... 610 mm (24”)
Depth .... 637 mm (25”)
Height ... 401 mm (15-3/4”) (including Original Cover)
127 V, 220–240 V; 50/60 Hz
–
G-6
Page 9
FrameMaker Ver.5.5(PC) EP1054/EP1085/EP2030 GENERAL
98.04.24
1174SBG0103A
1-3. Specifications of EP1054
Except the U.S.A ., Canada
✽
TYPE : Desktop (with Stationary Platen)
PHOTOCONDUCTOR : Organic Photoconductor
COPYING SYSTEM : Electrostatic Indirect Image Transfer to Pl ain Paper
PAPER FEEDING
SYSTEM
EXPOSURE SYSTEM : Mirror Scanning, Slit Exposure
DEVELOPING SYSTEM : Minolta New Micro-Toning System
CHARGING SYSTEM : Comb Electrode DC Negative Corona with Scorotron Sys-
IMAGE TRANSFER
SYSTEM
PAPER SEPARATING
SYSTEM
FUSING SYSTEM : Heat Roller
PAPER DISCHARGING
SYSTEM
MAXIMUM ORIGINAL
SIZE
: 2-Way Feeding Paper Drawer: Universal Tray
(250 sheets of paper)
Manual Bypass Table
tem
: Visible Image Transfer by means of a Si ngl e-Wi re DC Neg -
ative Corona with Corotron System
: AC Corona with Corotron System, plus Paper Separator
Finger
: Charge Neutralizing Brush
: Metric-A3L; Inch-11” × 17”L (L: Length w ise)
COPY MEDIUM
(60 to 90 g/m²)
Translucent paper –
Transparencies –
Medium
(91 to 157 g/m²)
Recycled paper
(Width × Length)
(Width × Length)
Dimensions
: Permissible
❍
Plain paper
Thick pap er
Maximum
Minimum
: Not permissible
–
Paper Drawer
(Automatic feeding)
❍❍
–
❍❍
297 × 432 mm 297 × 432 mm
140 × 182 mm 100 × 140 mm
Manual Bypass
(Single-sheet feeding)
❍
❍
❍
G-7
Page 10
FrameMaker Ver.5.5(PC) EP1054/EP1085/EP2030 GENERAL, MECHANICAL/ELECTRICAL
98.04.24
MULTIPLE COPIES : 1 to 99
WARMING-UP TIME : 30 sec. or less with room temperature of 23°C and rated
power voltage
FIRST COPY TIME : A4C or 8-1/2”
CONTINUOUS COPY SPEED (copies/min.): Fed from 1st Drawer
Area
Size Size
Metric
L: Lengthwise; C: Crosswise
ZOOM RATIOS
Fixed
V ariable 50% to 200% (in 1% increme nts)
Zoom Ratio
A3L
A4L
A4C
B4L
Mode
(in Full size Mode using 1st Drawer)
1.00 Area
×
12
15
15
13
Full Size 100% 100%
Reduction
Enlargement
11”C: 7. 2 s e c . or le s s
×
Inch
Area
Zoom Ratio
11” × 17” (L)
8-1/2” × 11” (L)
8-1/2” × 11” (C)
5-1/2” × 8-1/2” (L)
Metric Inch
81%
70%
50%
115%
141%
200%
78%
64%
50%
121%
129%
200%
×
1.00
11
15
15
15
LENS : Through Lens (F = 8.0, f = 180 mm)
EXPOSURE LAMP : Halogen Frost Tube Lamp
FUSING
TEMPERATURE
:195°C
G-8
Page 11
FrameMaker Ver.5.5(PC) EP1054/EP1085/EP2030 GENERAL
98.04.24
POWER/CURRENT CONSUMPTION (Copier Only)
Fusing
Heater
Lamp
(Rating)
115–120V
900W
115–120V
900W
115–120V
900W
220–240V
900W
Max. Power
Consumption
1180W 935W
1220W 965W
1220–1290W 965–1070W
1195–1270W 930–1060W
Voltage
115V
120V
120–127V
220–240V
Exposure
Lamp
(Rating)
80V
225W
80V
225W
80V
225W
160V
240W
In Standby
POWER
REQUIREMENTS
ENVIRONMENTAL CONDITIONS
Temperature 10 to 30°C with a flu ct uation of 10°C or less per hour
Humidity 15 to 8 5% RH with a fluctuation of 10% RH or less per hour
Ambient Ill umi nation 3,000 lux or less
Levelness 1° (1.75 mm/100 mm)
DIMENSIONS
(Copier Only)
WEIGHT : 50 kg (110-1/4 l bs )
: 115 V, 120 V, 120
: Width .... 610 mm (24”)
Depth .... 637 mm (25”)
Height ... 401 mm (15-3/4”)(including Original Cover)
127 V, 220–240 V; 50/60 Hz
–
G-9
Page 12
FrameMaker Ver.5.5(PC) EP1054/EP1085/EP2030 GENERAL, MECHANICAL/ELECTRICAL
98.04.24
1174SBG0200A
2 PRECAUTIONS FOR INSTALLATION
Installation Site
To en sure s afety and u tmo st p erf o rmance of t he copie r, the co pier sh ould NO T b e used in a
place:
Where it will be subject to extremely high or low temperature or humidity.
•
Which is exp osed to direct sunlight.
•
Which is in the direct air stream of an air conditioner, heater or ventila tor.
•
Which puts the operator in the direct stream of exhaust from the copier.
•
Which has poor ventilation.
•
Where ammonia gas might be generated.
•
Which does not have a stable, level floor.
•
Where it will be subject to sudden fluctuations in either temperature or humi di ty. If a col d
•
room is quickly heated, condensation forms inside the copier, resulting in blank spots in
the copy.
Which is near any kind of heating device.
•
Where it may be splashed with water.
•
Which is dirty or where it will receive undue vibration.
•
Which is near v ol atile flammables or curtains.
•
Power Source
Use an outlet with a capacity of 115V, 1.18KW or more, or 120V, 1.22KW or more, or 120127V, 1.29KW or more, or 220
If any other electrical equipment is sourced from the same power outlet, make sure t hat
•
the capacity of the outlet is not exceeded.
Use a power source with little voltage fl uctuation.
•
Never connect by mean s of a multiple socket any other appliances or machines to the
•
outlet being used for the copier.
Make the following checks at frequent intervals:
•
Is the power plug abnormally hot?
✽
Are there any cracks or scrapes in the cord?
✽
Has the power plug been inse rted fu lly into the outlet?
✽
Does something, including the copier itself, ride on the power cord?
✽
Ensure that the copier does not ride on the power cord or communications cable of other
•
electrical equipment, an d that it does not become wedged into or underneath the mechanism.
240V, 1.27KW or more.
–
Grounding
To pr event receiving electrical shoc ks i n the case of electri cal leakage, always ground the
copier.
Connect the grounding wire to:
•
The ground terminal of the outle t.
✽
A grounding contact which complies with the local electrical standards.
✽
Nev er connect the grounding wire to a gas pi pe, the grounding wire for a telephone, or a
•
water pipe.
G-10
Page 13
FrameMaker Ver.5.5(PC) EP1054/EP1085/EP2030 GENERAL
98.04.24
1174SBG0300A
3 PRECAUTIONS FOR USE
To ensure that the copi er is used in an opt i mum condition , observe the following precautions.
Nev er pl ace a heavy object on the copier or subject the copier to shocks.
•
Insert the power plug all the way into the outlet.
•
Do not attempt to remove any panel or cover which i s secured while the copie r i s making
•
copies.
Do not turn OFF the Power Switch while the copier is making copies.
•
Provide good ventila ti on when making a large number of copies c ontinuously.
•
Never use flammable sprays near the copier.
•
If the copier bec omes inordinatel y hot or produces abnormal noise, turn it OFF and
•
unplug it.
Do not turn ON t he Power Swi tc h at t he same t ime when y ou plug th e p o wer cord int o t he
•
outlet.
When unplugging the power cord, do not pull on the co rd; hold the plug and pull it out.
•
Do not bring any magnetized object near the copier.
•
Do not place a v ase or ves sel containing water on the copier.
•
Be sure to turn OFF the Power Switch at the end of the workday or upon power failure.
•
Use care not to drop paper clips, staples, or other small pieces of metal into the copier.
•
Operating Environment
The operating environmental requirements of the copier are as f ollows.
Temperature: 10°C to 30°C with a fluctuation of 10°C per hour
✽
Humidity: 15% to 85% RH with a fluc tuation of 10% RH per hour
✽
Power Requirements
The power source voltage requirements are as follows.
V oltage Fluctuation:
✽
Frequency Fluctuation:
✽
AC115/120/127/220 /240V
±10% (Copying performance assured)
+6%, –10% (Only AC127V)
–15% (Paper feeding performance assured)
50/60 Hz ±0.3%
G-11
Page 14
FrameMaker Ver.5.5(PC) EP1054/EP1085/EP2030 GENERAL, MECHANICAL/ELECTRICAL
98.04.24
1174SBG0400A
4 HANDLING OF THE CONSUMABLES
Before using any consumables, al ways read the label on its cont ainer carefully.
Use the right toner. T he applicable copier model name is indicated on the Toner Bottle.
•
Paper is ap t to be ea sily dama ged by d ampnes s. To preve nt ab sorption o f mois ture , st ore
•
paper, which has been r emoved from its wrapper but not loaded into t he Drawer, in a
sealed plastic bag in a cool, dark place.
Keep consumables ou t of the reach of children.
•
Do not touch th e PC Drum with bare hands .
•
Store the paper, toner, and other consumables in a place free from direct sunlight and
•
away from any heating apparatus.
The same sized paper is of two kinds, short grain and long grain. Short grain paper
•
should only be fed through the copier crosswise, long grain paper should only be fed
lengthwise.
If your hands become soiled wit h toner, wash them with s oap and water immediately.
•
Do not thro w awa y any used consumables (PC Drum, st arter, toner, etc.). They are to be
•
collected.
NOTE
Do not burn, bury in the ground, or throw into the water any consumables
(PC Drum, starter, toner, etc.).
G-12
Page 15
FrameMaker Ver.5.5(PC) EP1054/EP1085/EP2030 GENERAL
98.04.24
1174SBG0500A
5 SYSTEM OPTIONS
1174SBG0501A
5-1. System Options of EP2030
1, 2
7, 8
1151O007AA
9
1138O525AA
1139O0020A
5
1174G003AA
1. Automatic Document Feeder AF-5
2. Duplexing Doc ument Feede r AFR-12
3. Paper Feed Cabinet PF-112
4. Duplex Cabinet PF-6D
5. Paper Feed Cabinet PF-206
3
1174G004AA
6. Duplex Unit AD-11
7. 10-Bin Sorter S-106
8. Staple Sorter ST-104
9. Data Controller D-102
G-13
1174G001AA
1174G002AA
6
4
1174G006AA
Page 16
FrameMaker Ver.5.5(PC) EP1054/EP1085/EP2030 GENERAL, MECHANICAL/ELECTRICAL
98.04.24
1174SBG0502A
5-2. System Options of EP1085
1
1139O0010A
3
1139O0020A 1174G005AA
1138O525AA
2
1139O0170A
4
1. Automatic Document Feeder AF-5
2. Multi Bypass Tab l e MB-4
3. 10-Bin Sorter S-106
4. Data Controller D-102
1174SBG0503A
5-3. System Options of EP1054
Except the U.S.A ., Canada
✽
1. Multi Bypass Tab l e MB-4
1
1139O0170A
1174G005AA
G-14
Loading...